Kitchenaid Kfis29bbmsoo Parts

This right-side pantry sideplate restores the interior trim on compatible refrigerators, keeping the pantry compartment sealed and looking finished. Durable replacement to help support door components and improve appearance. What it does:

• Replaces a cracked, warped, or missing right pantry sideplate
• Restores the interior trim that helps hold pantry shelves and seals in place
• Prevents edge damage and covers mounting points for a clean look
• Matches OEM fit for proper alignment and function

• Install with basic hand tools; align before tightening fasteners
• Handle carefully to avoid scratching finished surfaces
• Disconnect power only if work requires removing electrical components nearby
• If mounting hardware is damaged or missing, replace hardware separately

A replacement icebox rear gasket that seals the freezer compartment to help keep cold air in and reduce moisture intrusion. Restores the door seal to help maintain proper temperature and reduce frost buildup. What it does

• Seals the icebox/freezer door edge to maintain cold compartment temperature.
• Helps prevent warm air and moisture from entering, reducing frost and ice buildup.
• Can improve cooling consistency and help reduce excessive run time caused by a poor seal.
• Common symptom fix: visible gaps, torn or deformed seal, or recurring frost around the door.

• One icebox rear gasket.

• Disconnect power to the appliance before replacing the gasket.
• Remove the old gasket, clean the door/frame sealing surface, and align the new gasket evenly.
• Press the gasket into the channel firmly; some models may require gentle warming or minor adjustment for a snug fit.

This glass shelf replaces a damaged or missing refrigerator shelf to restore usable storage space and an even load surface. It provides a flat, easy-to-clean surface for food storage and organization. What it does:

• Replaces a broken, cracked or missing refrigerator shelf so you can safely store items.
• Provides a stable, level surface for food containers, deli items and produce.
• Helps maintain organized shelving and prevents items from shifting or tipping.
• Easy-to-clean glass surface resists stains and odors compared with porous shelving.

• Remove all items from the refrigerator compartment and support adjacent shelves before removing the old shelf.
• Slide the shelf out carefully to avoid chipping; lift straight up when reinstalling to seat into shelf supports.
• Handle the glass with care and wear cut-resistant gloves if broken glass is present.
• No electrical disconnection is typically required, but follow your appliance owner's manual for any model-specific instructions.

This Mullion Rail trim piece replaces a damaged or worn refrigerator door mullion to restore a finished appearance and help maintain a proper door seal. It fits the vertical trim area between the door and cabinet. What it does:

• Replaces cracked, dented, or missing mullion trim that affects appliance appearance
• Provides a finished edge around the refrigerator door for improved sealing contact
• Helps keep the door gasket aligned along the vertical edge
• Restores a uniform look when original trim is faded or broken

• One Mullion Rail trim piece

• High-level replacement: remove the old mullion trim and snap or screw the new piece into place per your model's service instructions
• Use care to avoid damaging the door gasket or surrounding finish during installation
• Disconnect power only if removal requires moving electrical components (most trim swaps do not)
• If fasteners are missing or retention clips are damaged, replace them with OEM-design equivalents

This replacement cover restores the appliance's exterior protection and appearance by shielding internal components from dust and damage. It fits in place of a cracked, broken, or missing panel to help keep parts secure and reduce debris entry. What it does

• Protects internal components and wiring by covering exposed areas
• Helps prevent dust, lint, and small object entry that can affect operation
• Restores cosmetic appearance when the original cover is cracked, warped, or missing
• Can reduce vibration noise caused by loose or damaged panels
• Keeps fastener locations secure so other components mount correctly

• Disconnect power (unplug or shut off breaker) before beginning any work
• Use basic hand tools to remove screws or clips holding the existing cover; save fasteners unless replacements are provided
• Handle edges carefully; replace only with the matching cover to ensure proper fit and clearance
• Inspect surrounding components for damage when removing the old cover and reassemble in reverse order

This is a genuine mounting screw used to secure appliance panels and components. It provides reliable fastening to keep parts aligned and reduce vibration-related noise for safer, quieter operation. What it does:

• Secures panels, brackets, or small components to the appliance frame
• Prevents parts from loosening and causing rattling or misalignment
• Maintains proper part positioning for reliable operation
• Helps reduce vibration and noise when panels are fastened correctly

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Disconnect power before servicing electrical appliances to avoid shock
• If a screw is corroded or damaged, replace all similar fasteners in that area for best results

This drip tray collects and channels defrost and condensation water away from the refrigerator cabinet to prevent leaks and puddles. It helps keep the interior base area dry and directs meltwater to the drain system. What it does:

• Catches meltwater from the evaporator during defrost cycles to prevent pooling under the cabinet
• Channels water toward the refrigerator's drain system to reduce leaks and floor damage
• Helps limit ice buildup and moisture-related odors around the freezer base
• Common symptom: visible water or puddling under or beside the fridge, or excessive moisture in the base pan area

• One drip tray as shown

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove food and, if needed, the lower access panel or kickplate to access the tray
• Inspect adjacent drain tubing and grommets while replacing the tray to ensure proper drainage
• Reinstall panels and restore power; run a short defrost or water cycle to ensure proper drainage

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This solenoid valve coil energizes the refrigerant service valve to help control refrigerant flow in compatible refrigeration systems. Replaces a worn or failed coil to restore valve actuation and reliable cooling system operation. What it does

• Energizes the refrigerant service valve so the valve can open or close when the system calls for it
• Common replacement when the valve won't actuate or the compressor cycle is abnormal
• Helps stop intermittent cooling caused by a stuck or non-responsive valve coil
• Fits into the valve assembly and provides the magnetic force needed for proper valve movement

• Disconnect power to the appliance before servicing to prevent shock or unintended compressor operation
• Inspect the valve and connector for corrosion or damage; replace the valve if body damage is found

This fan gasket seals the fan housing to help direct airflow and maintain proper cooling performance. It replaces a worn or damaged seal to reduce air bypass and improve temperature consistency in the appliance. What it does:

• Seals the fan housing to keep airflow directed through the evaporator/condenser as designed
• Helps prevent air leaks that can cause uneven cooling or longer run cycles
• Reduces the chance of frost buildup or moisture intrusion around the fan area
• Can minimize wind noise from air escaping gaps at the fan assembly

• Disconnect power to the appliance before beginning any repair
• Remove access panels and the fan housing to reach and replace the gasket
• Ensure the gasket seats evenly around the fan housing; trim none unless specified by the OEM
• Inspect surrounding components (fan blade, housing) for damage and replace if needed

Sealer for refrigerant line insulation.

The Compressor is an OEM component specifically designed for Whirlpool refrigerators. Located inside the refrigerator cabinet, the compressor circulates refrigerant throughout the cooling system, regulating temperatures inside food compartments. Its efficient operation is crucial to food freshness and refrigerator function.

Symptoms of a bad compressor include: 

• Elevated interior temperatures unable to be maintained  
• Louder than normal buzzing or humming sounds coming from inside
• Frost or ice building up in areas where it typically would not  
• Refrigerator lights repeatedly cycling on and off

Causes of compressor failure involve normal wear of internal parts over time, loss of refrigerant allowing components to overwork, or disruption in the flow and pressure of circulating coolant. 

This OEM Whirlpool part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

Color: Grey
 

This genuine wire harness routes power and signals between electrical components to restore reliable operation and safe connectivity. It replaces damaged or worn wiring that can cause intermittent function or loss of power. What it does:

• Connects control, motor and sensor circuits so the appliance components communicate and receive power
• Replaces frayed, chafed or burnt wires that can cause intermittent operation or failure to start
• Restores secure connector fit to prevent arcing and erratic behavior
• Helps eliminate wiring-related faults that trigger error codes or safety cutouts

• Always disconnect power (unplug or switch off breaker) before starting work
• Note or photograph original routing and connector positions for correct reassembly
• Inspect nearby wiring, connectors and fasteners; secure harness away from heat and sharp edges

The Wire Harness is an OEM component for Whirlpool refrigerators. As the framework that powers all electronic systems, it plays a vital connecting role. 

The harness incorporates precisely engineered cabling to route electrical signals and low-voltage DC power throughout the appliance in a protected bundle. Strategically placed terminals link to each component board and relay. 

Causes for wire harness issues include pinched insulation from improper installation, short circuits due to nicks/cuts in the sheathing over time, or broken connectors that disrupt circuit pathways.

Symptoms of a bad wire harness can include:

• Lights, fans, or temperature control malfunctions 
• Failure to power on or intermittent cut-outs
• Tripped circuit breakers/blown fuses for the fridge  
• Wire cracking, looseness at bundle ties

Compatible with models from Maytag, KitchenAid, Jenn-Air, Amana, and select Kenmore as well for continued reliability.

A small replacement retainer that secures internal components and trim pieces so they stay properly aligned and stable. Restoring a broken retainer helps stop rattling and keeps parts seated for reliable operation. What it does:

• Secures panels, trim, or small assemblies in place to prevent shifting
• Reduces vibration and rattling caused by a loose or broken clip
• Keeps wiring or hoses routed and held away from moving parts
• Helps maintain proper alignment of the part it supports

• Disconnect power to the appliance before servicing to avoid shock
• Use basic hand tools; inspect surrounding parts for damage before reinstalling
• Handle sharp sheet-metal edges carefully and wear gloves if needed
• Replace only the failed retainers; verify fit before final reassembly