Kitchenaid Koce500ess07 Oven/Microwave Parts

This lamp holder secures and powers the oven/cabinet G4-base bulb so interior lighting works reliably and safely. It restores proper bulb contact and helps prevent flickering or intermittent lighting. What it does:

• Holds the G4-base light bulb in place and provides the electrical connection
• Restores interior lighting when the socket is loose, corroded, or damaged
• Helps stop flickering or intermittent on/off issues caused by a faulty holder
• Compatible with the oven/cabinet light assembly that uses a G4-style bulb

• Disconnect power to the appliance before servicing to avoid shock
• Allow the appliance and bulb to cool before touching components
• Inspect wiring and connectors; replace the holder if terminals are corroded or melted
• Use the correct G4 bulb type and wattage per the appliance manufacturer's instructions

This mounting bracket is a replacement support bracket that secures appliance components and keeps assemblies aligned for reliable operation. It restores proper fit and helps prevent rattling or movement from loose fittings. What it does:

• Secures panels or assemblies to the appliance frame to maintain proper alignment
• Reduces vibration and rattling caused by loose or damaged supports
• Restores mounting points that prevent sagging or separation of connected parts
• Helps ensure stable operation after repairs involving removed or replaced hardware

• Follow the appliance service manual for exact location and fastener torque
• Disconnect power (and gas if applicable) before beginning any repair
• Use appropriate tools and replace any damaged screws or clips with OEM-equivalent fasteners

This membrane switch touch pad is the flat control interface used to send commands to the appliance's control board, restoring responsive button input and correct touch operation. It replaces a worn, cracked, or unresponsive control pad. What it does:

• Provides the user-facing buttons and contact points for the appliance control panel
• Sends touch/button signals to the control board so settings and cycles can be selected
• Commonly replaced when buttons stop responding, stick, or the pad is physically damaged
• Helps restore reliable control input and normal operation of the appliance user interface

• One membrane switch touch pad

• Disconnect power (unplug appliance or shut off circuit breaker) before starting any repair
• Access may require removal of the control panel or console; keep track of screws and clips
• Handle the membrane pad carefully—avoid creasing, bending, or contaminating contacts
• Reconnect the ribbon/connector fully and test functions before reassembling completely

This main wiring harness routes power and signals between controls, motors and other components to restore electrical connections and appliance function. It's a direct-fit harness designed for reliable circuit routing and secure plug-in connections. What it does:

• Connects control board, motor(s), switches and sensors so components communicate and receive power
• Replaces damaged, frayed or burned wires that can cause intermittent operation or complete failure
• Helps resolve symptoms like no power to components, intermittent cycles, or electrical arcing at connector points
• Maintains OEM-style connectors and color-coded wires for correct reconnection

• One complete main wire harness as shown

• Always disconnect power (unplug or shut off breaker) before accessing wiring
• Inspect connectors and mating components for damage; replace any burned or corroded parts
• Route harness per service diagram and secure with original clips/fasteners to avoid chafing

This oven light assembly replaces a damaged or missing interior light lens and housing to restore oven-cavity illumination for safer cooking and easier food monitoring. It fits into the oven ceiling and protects the bulb from heat and spills. What it does:

• Replaces the oven's interior light lens and housing so the light can safely illuminate the cavity
• Protects the bulb from grease, spills, and direct heat
• Helps resolve symptoms like no interior light, cracked or missing lens, and a rattling or loose lens/housing
• Restores proper light alignment and coverage for better visibility when checking food

• Disconnect power to the appliance before starting any work
• Allow the oven to cool completely; the lens and surrounding parts can get very hot
• Handle glass components carefully to avoid breakage; wear gloves and eye protection

This sliding oven rack restores smooth, stable access to cookware in your range or wall oven. Replace a bent, missing, or sticky rack so pans glide out easily for checking, basting, and safer removal of hot dishes.

• Provides a gliding shelf for loading and unloading cookware
• Helps improve access to dishes without reaching deep into a hot oven
• Common signs it's needed: rack won't slide smoothly, binds or sticks, is warped/bent, or is missing
• Restores full oven capacity and convenient use of designated rack positions

• Allow the oven to cool completely before installing; wear gloves to protect hands
• Remove the old rack; identify the correct rail position in your oven cavity
• Insert the new rack in the guides with the proper front/back orientation
• Slide in and out to confirm smooth travel before heating the oven; for any self-cleaning precautions related to racks

The Inner Door Glass is an OEM part for Whirlpool microwaves. It forms the see-through window that allows for monitoring food as it cooks. The strengthened glass panel is designed to withstand prolonged exposure to steam and heat without issues.

Causes of bad inner door glass can include cracks or chips from accidental drops or impacts, or damage from cleaning chemicals or harsh scrubbing that compromise the glass integrity. 

Symptoms of a bad inner door glass include:

• Cracks or chips in the viewing surface
• Complete breakage leaving a hole in the door  
• Loose or improperly sealed glass panel
• Increased potential for leaks near door seals

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwaves.

The Door Hinge Receiver is an OEM part for Whirlpool ranges. It receives and pivotally mounts the range door hinges, facilitating smooth opening and closing of the door.

Causes of a bad range door hinge receiver include normal wear and tear over time, repeated opening and closing stress, and damage or warping from excessive heat exposure.

Symptoms of a bad door hinge receiver include:

• Cracks or wear on mounting surfaces that could compromise safety
• A loose, wobbly or misaligned range door that does not seal properly
• The door being difficult to open and close smoothly
• Potential for the door to fall off if mounting surfaces fail

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
 

Seals the appliance door to prevent leaks and keep the interior working as intended. Replace a cracked, torn, or hardened gasket to stop leaks, reduce odor and mold, and restore a reliable door seal. What it does:

• Forms a tight seal between the door and cabinet to prevent water, air, or heat loss
• Stops common symptoms like visible cracks or gaps, water pooling, and persistent odors
• Restores proper containment for cleaning, heating, or washing cycles
• Matches the OEM channel/retainer design for a secure fit

• Disconnect power and water before beginning any repair
• Remove the old gasket, thoroughly clean the mounting area, then seat the new gasket into the door channel or retainer
• Work the gasket evenly around the door; avoid overstretching and ensure all beads/clips are fully engaged

This tension spring restores proper movement and tension for the appliance component it secures, helping the part operate smoothly and reliably. It's a simple replacement that fixes common issues caused by worn or broken springs. What it does:

• Provides tension to hold or return a moving component to its correct position
• Helps stop sagging, slipping, or loose operation of doors, latches, or levers
• Can reduce rattling or unusual noises caused by a failed spring
• Restores normal mechanical action when the original spring is stretched or broken

• Disconnect power to the appliance before starting any repair
• Springs can be under tension—use appropriate tools and wear eye/hand protection
• Compare the new spring to the old one for length, coil size, and end fittings before installation

This microwave door outer assembly replaces a damaged or broken door to restore the appliance's appearance and proper closure. It helps maintain the microwave cavity seal and allows the door latch and handle to function correctly. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer door panel
• Restores proper door closure and engagement with the latch for safe operation
• Helps reduce light, steam, and food vapor escaping the cavity during use
• Improves the microwave's finished appearance and user access

• Disconnect power at the breaker or unplug the microwave before servicing
• Handle and latch components may be attached; verify correct alignment during reassembly
• Use appropriate tools and avoid forcing plastic clips to prevent damage

This is a replacement 8-18 screw used to secure components in compatible Whirlpool appliances. It provides a reliable, corrosion-resistant fastener to restore proper fit and function for panels and internal parts. What it does:

• Secures panels, brackets, or small internal components where an 8-18 thread is specified
• Restores loose or missing fasteners that cause rattling, misalignment, or improper sealing
• Matches OEM thread size and head profile for a correct fit when listed for your model
• Prevents further wear or damage caused by using the wrong screw size

• One screw as shown

• Turn off and unplug the appliance before starting any repair
• Use the proper screwdriver or driver bit to avoid stripping the head
• Do not overtighten—tighten until snug and components seat without play
• Replace only where the OEM specifies an 8-18 screw to ensure proper fit

This spacer provides a small, rigid gap between appliance components to maintain proper alignment and prevent contact. It restores correct spacing so panels, doors, or assemblies fit and move as intended. What it does:

• Maintains proper clearance between parts to prevent rubbing, binding, or wear
• Helps align panels, trim, or assemblies for smooth operation
• Supports fasteners or clips to ensure a secure fit
• Can reduce vibration-related noise when spacing is correct

• One spacer

• Disconnect power or gas before servicing the appliance
• Inspect mounting area and fasteners; replace any worn clips or screws as needed
• Install in the original orientation; do not force into place or over-tighten fasteners