Kmhs120ess-10 Parts

This electronic control panel is the user interface assembly that lets you operate and program the appliance. It provides tactile buttons and the display needed to select cycles and options, restoring normal control operation. What it does

• Replaces a worn, unresponsive, or damaged control panel to restore button and display function.
• Allows selection of cycles, options, and start/pause commands through the front-facing user controls.
• Addresses symptoms such as non-working buttons, blank or erratic display readout, or inability to change settings.
• Works with the main control board to transmit user inputs for proper appliance operation.

• One control panel assembly

• Disconnect power to the appliance before attempting any service to avoid shock or injury.
• Basic disassembly of the console may be required; retain all screws and hardware for reassembly.
• Handle the display and ribbon/connectors carefully to avoid damage; ensure connectors are fully seated before testing.

This electronic control board replaces a failed main control to restore your appliance's control functions and display responses. It manages user inputs and timing so cycles run as intended and settings register correctly. What it does:

• Interprets control panel commands and sends signals to motors, valves, heaters, and other components
• Regulates cycle timing, start/stop functions and display feedback
• Commonly used to address unresponsive controls, incorrect cycle behavior, or intermittent operation
• Resolves error codes or display issues tied to a failed control board

• Disconnect power (and water if applicable) before service to avoid shock or injury
• Handle the board by the edges and avoid touching components to prevent static damage
• Reinstall original connectors and mounting hardware; ensure all connectors seat firmly
• Test operation before fully reassembling the appliance.

This air deflector redirects airflow inside the appliance to help maintain proper circulation and protect components from direct airflow. Replacing a damaged deflector restores intended air paths and can reduce uneven temperature or noise. What it does

• Guides air where the manufacturer intended to ensure even circulation.
• Protects nearby components from direct airflow and wear.
• Helps reduce symptoms like uneven cooling/heating or unusual airflow noise.
• Works as a passive airflow-management part — no electrical connection.

• Disconnect power to the appliance before starting any repair.
• Handle the deflector carefully to avoid cracking plastic tabs during removal or installation.
• Installation typically requires basic hand tools; for exact steps.

Color: Black

This stainless-finish microwave door replaces a damaged or worn door. It restores appearance, visibility, and proper latching/seal so the microwave opens and closes correctly and runs only when the door interlocks are engaged.

• Maintains the cavity door seal to contain microwave energy as designed
• Houses the door hooks that engage the interlock switches for safe operation
• Provides a clear viewing window to monitor cooking
• Addresses issues like the door not closing or latching, the unit not starting, or visible cracks/dents in the door

• Disconnect power at the breaker before servicing; microwave components can hold a charge
• Wear cut-resistant gloves; glass and metal edges may be sharp
• Follow your model's service procedure; transfer any reusable trim or spacers from the original door if required
• After installation, verify latch engagement and door alignment before restoring power

This Inlet Cover shields and seals the appliance's inlet opening to maintain proper flow and keep debris out. Replacing a cracked or missing cover helps prevent leaks, rattles, and performance issues for reliable day-to-day operation. What it does

• Covers and protects the inlet passage so air or water flows correctly
• Helps keep debris out of the system and supports proper sealing
• Reduces the chance of leaks, drips, or vibration noise
• Common symptoms: visible damage or missing cover, leaks near the inlet area, unusual noise, reduced performance

• 1 inlet cover

• Disconnect power; shut off water supply if applicable
• Access the inlet area and remove any screws/clips holding the old cover
• Transfer any reusable gasket or hardware and orient the new cover correctly
• Tighten fasteners evenly; restore power/water and check for proper operation and leaks

This support is a replacement mounting bracket that helps secure internal components and keeps assemblies aligned for proper operation. Installing a new support can reduce movement, rattling, or misalignment of the attached parts. What it does:

• Holds and stabilizes a component or assembly inside the appliance
• Prevents excess movement that can cause vibration or noise
• Keeps parts aligned to ensure smooth mechanical operation
• Helps maintain proper spacing between connected parts to avoid wear

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate hand tools; avoid overtightening mounting screws
• Wear safety gloves and eye protection; handle sharp sheet-metal edges with care

This support is a replacement structural mounting piece that helps hold and stabilize the appliance assembly, restoring proper alignment and reducing vibration. Use it when worn or broken supports allow panels or components to shift. What it does

• Provides structural support and alignment for the affected assembly to prevent sagging or misalignment.
• Reduces vibration and rattling caused by loose or damaged mounting points.
• Helps maintain proper spacing so moving parts operate without interference.
• Common symptom: visible damage, loose panels, unusual noise or movement during operation.

• One support part as shown.

• Disconnect power and water (if applicable) before starting any repair.
• Inspect adjoining fasteners and mounts; replace any that are damaged for a secure fit.
• Basic hand tools typically required; handle plastic tabs and clips carefully to avoid breakage.

This evaporator fan motor circulates cold air through the freezer and refrigerator compartments to maintain even temperatures and consistent cooling. Replaces a failed or noisy motor to help restore airflow and temperature stability. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator and into the cabinet.
• Helps prevent warm spots and uneven cooling when operating correctly.
• Commonly replaced for noisy operation, failure to run, or intermittent airflow.
• Compatible with refrigerators that use this OEM-style fan motor design.

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing interior panels or the evaporator cover; keep screws and fasteners organized.
• Inspect the fan blade and housing for ice buildup or obstructions before installing the new motor.

This outer door is the exterior cabinet panel that restores the appliance's finished appearance and protects internal door components from damage. Replaces a worn, dented, or corroded outer door panel to help the door look and function like new. What it does:

• Replaces damaged or dented exterior door panel to restore the appliance's appearance.
• Protects internal parts from moisture and impact.
• Helps maintain door alignment and sealing when used with intact inner components.
• Commonly used when the door shows visible cosmetic damage or exterior rusting.

• One outer door (single cabinet panel), as shown.

• High-level task: remove the inner liner and hinge fasteners to replace the outer panel; some models require disassembling door components.
• Use proper tools and support the door to prevent dropping or damage during removal.
• Disconnect power to the appliance before starting work if access requires electrical component removal.

Color: Black

This fixed thermostat senses temperature and opens or closes the electrical circuit to control heating. It replaces a failed temperature-sensing switch to restore proper heating control and safety. What it does:

• Monitors appliance temperature and interrupts power when the set limit is reached
• Prevents overheating by opening the circuit at high temperatures
• Restores normal heating control when a failed thermostat causes no heat or continuous heating
• Works as a safety/limit device in the appliance's heating system

• Disconnect power to the appliance before starting any repair
• Handle the thermostat and sensing element gently; avoid bending or stressing terminals
• Refer to the appliance service manual or OEM instructions for proper placement and mounting

Color: Stainless