Kodiacdriverwhidbeycom Parts

This trim vent is the exterior trim piece that finishes the appliance vent opening and helps direct airflow for proper operation and appearance. It replaces damaged, cracked, or missing vent trim to restore a clean, sealed fit. What it does

• Covers and protects the vent opening while directing airflow away from the cabinet
• Helps reduce visible gaps and prevents excess lint or debris buildup around the vent
• Restores a finished look when the original trim is cracked, warped, or broken
• Contributes to quieter operation by keeping the vent area properly seated

• Disconnect power to the appliance before beginning any work
• Typically snaps or screws into place; align the tabs and press until seated or secure with existing fasteners
• Use hand tools only and avoid forcing the part; replace any damaged clips or screws

This replacement exhaust vent directs oven/dryer exhaust airflow away from the appliance to maintain proper ventilation and reduce backflow. Restores intended airflow path to help reduce odors and heat buildup around the appliance. What it does

• Channels exhaust fumes and hot air out of the appliance's vent path.
• Helps restore proper ventilation when previous vent is cracked, warped, or blocked.
• Can reduce abnormal heat, odors, or poor drying/cooking performance tied to ventilation issues.
• Limits airflow leak points that can cause noise or vibration during operation.

• One exhaust vent housing.

• Disconnect power (and gas, if applicable) before starting work.
• Inspect and replace any worn gaskets, clamps, or vent hose to ensure a proper seal.

This oven vent directs hot air and steam away from the oven cavity to help maintain proper airflow and protect surrounding components. It replaces a failed or damaged vent to restore safe venting and oven performance. What it does:

• Guides exhaust air and steam out of the oven cavity to help reduce internal moisture and heat buildup
• Helps prevent heat and grease from reaching control panels and adjacent cabinetry
• Restores proper airflow when a cracked, warped, or missing vent causes visible leaks or uneven oven temperatures
• Matches OEM fit to ensure correct alignment with the oven front

• One oven vent/vent trim

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and remove any racks or accessories in the way
• Replacement typically requires removing the oven door or front trim panel for access; follow factory service instructions

This wire harness provides the factory-style electrical connections needed to restore secure, organized wiring in your appliance. Replacing a damaged harness helps re-establish reliable power and signal paths for controls and components. What it does:

• Connects multiple internal components with pre-terminated wiring and color-coded connectors
• Ensures correct signal and power routing between control boards, switches, and motors
• Commonly used to address intermittent power, loss of functions, or components that don't respond
• Keeps wiring bundled and secured to prevent chafing or short circuits

• Disconnect power (unplug or switch off breaker) before starting any repair
• Match connector shapes and wire colors; route and secure harness along the original path
• Inspect connectors and insulation; replace the entire harness if any wire or terminal is damaged

This glass bracket supports and secures a range/oven door glass panel, keeping the glass aligned and stable for safe operation. Replacing a worn or broken bracket restores proper door fit and reduces movement or rattling. What it does

• Secures the oven/range door glass to the door assembly to maintain alignment and stability
• Prevents glass movement, vibration noise, and uneven gaps around the door
• Helps protect the glass from chipping or cracking caused by improper support
• A damaged or missing bracket can cause door misalignment, rattling, or difficulty closing the door

• Disconnect power to the appliance before starting and follow manufacturer safety instructions
• Handle door glass carefully; wear safety gloves and eye protection to avoid cuts
• Reinstall carefully and verify door alignment and gasket seating before returning appliance to service

This is a genuine-style door handle designed to restore a secure, easy-to-grip opening for your appliance door. It replaces a broken, cracked, or worn handle so the door operates safely and reliably. What it does:

• Provides a solid grip to open and close the appliance door
• Replaces handles that are cracked, loose, or missing
• Helps prevent door damage from improper pulling or leverage
• Restores original appearance and ergonomics of the door

• One door handle

• Turn off/unplug the appliance before beginning any repairs
• Keep fasteners and small parts organized during disassembly to ensure correct reassembly
• Do not overtighten screws; align the handle to avoid stressing mounting points

This trim piece finishes the appliance opening for a clean, completed look and covers gaps where panels meet. It restores the appliance's appearance and helps protect edges from everyday wear. What it does:

• Covers and finishes the edge where two panels meet to improve appearance
• Conceals mounting holes and gaps for a uniform look
• Protects exposed edges from snags, scuffs and minor damage
• Helps keep dust and debris out of small crevices around the opening

• One trim piece

• Disconnect power and follow all safety guidelines before beginning any repair
• Retain and reuse any original screws or clips unless replacement hardware is specified
• Align the trim with mounting points and secure using the factory fasteners; some trims snap into place while others use screws
• Replace damaged components to ensure a secure fit

This small retainer clip secures appliance components to keep assemblies aligned and stable, preventing parts from shifting during use. It's a simple replacement that restores proper fit and reduces rattles or movement. What it does:

• Holds trim, panels, or small assemblies in place to maintain alignment
• Prevents rattling or vibration caused by loose parts
• Helps keep connected components properly seated for reliable operation
• Works as a direct-fit replacement when the original clip is worn or broken

• One replacement clip

• Disconnect power to the appliance before starting any repair
• Access and removal may require basic hand tools; handle panels gently to avoid damage
• Replace only the damaged clip; confirm orientation before fastening

This retaining nut secures components on compatible Whirlpool appliances to restore proper fastening and reduce looseness. A simple replacement for stripped or missing nuts that helps stop rattling and keeps parts held in place. What it does:

• Threads onto matching bolts or studs to fasten panels, brackets, or assemblies
• Restores tight connections that can cause vibration, noise, or looseness when worn or missing
• Commonly used where a small, serviceable nut is required for secure assembly
• Helps prevent components from coming detached during normal use

• Disconnect power and follow appliance-specific safety procedures before servicing
• Use the correct size wrench or socket; start threads by hand to avoid cross-threading
• Tighten securely but avoid overtightening to prevent damage to studs or mating parts
• If threads are damaged, replace the mating stud or fastener as needed