Kodiacdriverwhidbeycom Parts

This broiler pan restores a sturdy broiling surface in your oven. It holds food for high-heat broiling while the lower tray catches drippings to help reduce smoke and keep the oven cavity cleaner.

• Provides a durable surface for broiling under the broil element or flame
• Collects grease and juices beneath the food during high-heat cooking
• Replaces pans that are missing, warped, chipped, or heavily rusted
• Helps cut down on smoke and mess from burnt-on residue on a damaged pan

• Allow the oven to cool completely before handling
• Slide the pan onto the appropriate rack position per your model's instructions; no tools required
• Use oven mitts—surfaces and edges can be hot after broiling
• If your model uses a separate broiler grid or rack, position it on top of the pan before cooking

This bottom oven vent assembly replaces the lower oven vent that covers and directs airflow under the oven cavity, helping keep debris out of the lower compartment and maintaining proper ventilation for safe operation. What it does:

• Directs exhaust and airflow from the oven's lower front area to maintain ventilation.
• Protects the lower cavity from spills, crumbs and debris that can collect beneath the oven.
• Restores a secure, sealed fit where vents are cracked, warped, loose, or missing.
• Reduces drafts, odors or visible smoke coming from under the oven when the original vent is damaged.

• Disconnect power to the appliance before servicing to reduce shock and burn risk.
• Access is typically behind the lower access/grill panel; basic hand tools are usually required.
• Inspect mounting clips or screws when removing the old vent and reuse or replace as needed.

This cover protects and finishes the appliance's control panel area, keeping switches and electronics safe while restoring the original appearance. It provides a clean, secure surface that helps prevent dust and moisture from reaching internal controls. What it does:

• Covers and protects the control console or user interface area from dirt and debris
• Helps prevent accidental contact with buttons, switches, or electronics
• Restores the appliance's finished look after damage or wear
• Reduces light or moisture exposure to internal components when properly installed

• One control panel cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove any retainers or screws holding the console in place; retain hardware if reusing
• Handle carefully to avoid scratching the finish; align tabs and fasteners before securing

This bottom vent trim is the front kick-panel trim that finishes and secures the lower vent opening on compatible laundry appliances. It provides a clean appearance and helps direct airflow through the cabinet vent area. What it does:

• Covers and finishes the lower front vent opening for a factory look
• Helps secure the vent/grille area and conceal internal components
• Keeps debris from entering the lower cabinet space
• A damaged or missing trim can cause visible gaps, rattling, or reduced cosmetic appearance

• Disconnect power to the appliance before beginning work
• Typically installs at the lower front with clips or screws after removing the access panel or grille
• Handle edges carefully to avoid scratching finished surfaces; use appropriate hand tools
• Replace only with the correct trim for your model to ensure proper fit and ventilation

This oven vent directs hot air out of the oven cavity and helps maintain proper internal temperature and airflow. It replaces a damaged or warped vent to restore venting performance and oven appearance. What it does:

• Channels heat and steam out of the oven cavity to support even cooking
• Helps prevent heat buildup behind the oven and adjacent cabinetry
• Replaces cracked, bent or discolored vent trim that can affect airflow or appearance
• Compatible with factory vent locations — installs where the original vent was mounted

• Designed for rear/top vent mounting; verify orientation matches your appliance before installing
• Disconnect power to the appliance before beginning any service to avoid shock or injury
• Handle edges carefully; use appropriate tools to remove mounting screws and clips
• If vent damage is extensive or other components are affected, inspect surrounding parts and wiring

This rubber door bumper cushions and aligns the appliance door to prevent slamming and reduce vibration, helping doors close smoothly and protecting cabinet and door finishes from wear. What it does:

• Acts as a cushion between the door and cabinet, absorbing impact during closing
• Helps keep the door aligned and reduces rattling or vibration during use
• Prevents metal-to-metal contact that can cause chipping, scratching, or noise
• Commonly replaced when worn, flattened, cracked, or missing

• One rubber door bumper

• Remove power to the appliance before accessing the door area or hinges
• Usually presses into a hole or snaps into a mount on the door or cabinet; no special tools required for many models
• Inspect surrounding mounting boss for damage; replace if cracked or deformed

This replacement control panel restores the appliance's user interface so you can select cycles, start and stop operations, and view status indicators. It provides a direct swap for a damaged or unresponsive front console. What it does:

• Houses the push-buttons/touch controls and status LEDs or display used to operate the appliance
• Sends user commands to the control electronics so cycles and options run as selected
• Common fix for unresponsive buttons, missing or cracked face, and control-display errors
• Helps restore normal control operation when the original panel is physically damaged

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the panel and any attached ribbon/wiring carefully to avoid damage
• Installation typically requires removing the console or front trim; keep fasteners organized

Baking stone, 13" in diameter. For "brick oven" results!

This support bracket secures and stabilizes appliance panels and internal assemblies where a small mounting brace is required. It restores proper alignment and helps prevent vibration or sagging for a firmer fit and quieter operation. What it does

• Anchors and supports panels, trim, or internal components to the cabinet or frame
• Keeps assemblies aligned to prevent rubbing, gaps, or misalignment
• Reduces rattling and vibration caused by loose or missing bracketry
• Restores proper fit when original bracket is bent, broken, or missing

• Disconnect power to the appliance before beginning any repair
• Inspect mounting location and replace any stripped fasteners or damaged hardware
• Use the correct screws and hand tools to avoid stripping or overtightening

Mounting bracket for bottom trim.

Left hand side. For the right hand side order 814373.

This bake tray replaces a worn or damaged oven baking surface to help you cook and roast evenly while containing spills. Durable metal construction offers a flat, stable surface for pans, cookies and sheet-baked foods. What it does:

• Provides a flat baking surface for cookies, roasting and sheet-pan meals
• Replaces trays that are warped, dented, rusted or have a damaged cooking surface
• Helps contain drips and spills to protect the oven floor from messes
• Restores proper tray function when missing or broken

• Allow the oven to cool completely before removing or installing the tray
• No tools required — slide into oven racks or support ledges as designed
• Wear work gloves to avoid sharp edges on damaged trays

This replacement back cover restores the appliance's rear housing to protect internal components from debris and accidental contact. It keeps wiring and controls enclosed and helps maintain proper airflow behind the unit. What it does:

• Covers and protects the motor, wiring, and control components at the rear of the appliance
• Replaces cracked, broken, or missing rear panels that expose internal parts
• Stops rattling or vibration caused by loose or damaged covers
• Helps prevent debris and pets from entering the cabinet area

• Disconnect power to the appliance before starting any repair
• Basic hand tools required; mounting screws may need removal and reinstallation
• Handle edges carefully—sheet metal can be sharp