Kodiacdriverwhidbeycom Parts

Color: Black. For biscuit order 98008169. For white order WP98008544.

This fixed thermostat monitors temperature and opens the circuit at its factory set point to protect components and control heating performance. Replacing a failed thermostat helps restore proper heat function and prevents nuisance shutdowns or overheating. What it does:

• Senses temperature and opens the circuit when its fixed threshold is reached
• Protects heaters, motors, and wiring from over-temperature conditions
• Common failure symptoms: no heat, overheating, erratic cycling, or safety shutdowns
• Restores consistent heating operation when the original thermostat has failed

• 1 fixed thermostat

• Disconnect power before servicing; allow hot surfaces to cool
• Access the thermostat, note wire orientation, and transfer any bracket/insulation from the old part
• Ensure firm thermal contact and secure mounting as originally installed
• After replacement, correct root causes of overheating (restricted airflow/venting, failed relays, etc.) and verify operation

This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.

• Secures wire lugs to a 10-32 terminal stud for a solid electrical connection
• Restores proper clamping force when the original nut is stripped, corroded, or missing
• Helps address loose/burned terminal connections, heat discoloration, or intermittent power at the block
• Suitable for terminal block and similar 10-32 stud applications on compatible appliances

• Disconnect power at the breaker or unplug the appliance before servicing
• Inspect the terminal block, studs, and wiring for heat damage; replace any damaged components
• Clean threads and start the nut by hand to avoid cross-threading; tighten firmly without overtightening
• If the stud turns while tightening, hold it with an appropriate tool to protect the block

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

Screw for control panel vent.

Restore a safe, efficient oven door with this inner glass panel. It replaces the heat-resistant liner on the inside of the door, helping retain heat and keep the viewing window clear during cooking. What it does:

• Forms the inner layer of the oven door window and helps insulate the oven cavity
• Maintains a clear interior-facing surface for viewing food
• A damaged panel can cause heat loss, temperature fluctuations, or poor visibility through the door window
• Replace if the glass is cracked, shattered, chipped, or permanently hazy/etched

• 1 inner oven door glass panel

• Disconnect power at the breaker and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; glass edges can be sharp
• Remove the door and place it face down on a protected surface; follow model-specific steps to access the inner pane
• Transfer any retainers/brackets as needed and tighten hardware evenly without overtightening

Almond. Size: 13 oz. can. Acrylic appliance paint.

The Motor-Fan is an OEM component specifically designed for Whirlpool kitchen ranges. Located within the back wall of the oven cavity, the motor fan works to circulate air and remove excess moisture and smoke during the cooking process. Proper motor-fan functioning helps ensure efficient oven ventilation and performance.

Symptoms of a bad motor fan include:

• Excessive smoke or moisture left in the oven after cooking  
• Oven taking longer to preheat and cook due to poor air circulation
• Loud buzzing or grinding noises emanating from the fan

Causes of failure are normally wear and tear of motor windings or fan blade bearings from years of continuous use. Overheating can potentially reduce lifespan as well. 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This left-hand side trim finishes and protects the edge of the appliance's panel or housing, restoring a clean, factory look. Replace when the original trim is cracked, missing, or loose to keep panels aligned and edges covered.

• Provides a finished edge on the left side and improves overall appearance
• Helps cover gaps and protect edges from snags or chipping
• Aids proper alignment of adjacent panels or consoles
• Replace if cracked, warped, loose, or missing
• Common symptoms: visible gap on the left side, rattling/loose panel, sharp or broken edge, cosmetic damage

• Disconnect power before servicing; also shut off gas supply
• Wear cut-resistant gloves; edges and surrounding panels can be sharp
• Left/right orientation is determined when facing the front of the appliance
• Align the trim and secure with existing hardware; do not overtighten fasteners

Replacement oven rack restores a stable cooking surface and allows easy access to food. It provides secure support for cookware and slides smoothly on oven rack guides so you can load and remove dishes safely. What it does:

• Holds cookware and bakeware inside the oven so pans sit level during baking and roasting.
• Slides in and out on factory rack guides for easy loading and checking food.
• Replace if the rack is bent, warped, sagging, or has a damaged finish that interferes with use.
• Helps prevent cookware from tipping or shifting while you remove hot items.

• Allow the oven to cool completely before installing or removing racks to avoid burns.
• Slide the rack into the desired set of guides until it seats fully and sits level.
• No tools are typically required; inspect rack guides and supports for damage before use.
• If the rack rubs, jams, or won't seat properly, check the oven guides.

This 8-32 x 3/8 screw secures panels, brackets, and internal components in your appliance so everything stays aligned and tight. Replace worn or missing hardware to restore a solid, rattle-free fit and safe operation.

• Fastens components to frames, brackets, or panels
• Helps reduce vibration, rattling, and misalignment
• Replaces missing, stripped, or corroded screws
• Correct 8-32 machine thread for tapped holes in compatible assemblies

• Disconnect power before servicing; shut off gas or water if applicable
• Start threads by hand to avoid cross-threading
• Tighten snugly without overtightening to prevent stripping

This replacement oven vent installs at the lower front of the oven to channel hot air and moisture out of the cavity. Replacing a damaged vent restores proper airflow and a clean, secure front appearance.

• Mounts at the bottom/front of the oven to direct exhaust air away from the cavity
• Helps protect the control area and surrounding cabinetry from concentrated heat and moisture
• Replace if cracked, bent, missing, or loose
• Common symptoms: visible damage, rattling or gaps, heat/steam escaping from unusual areas at the front

• Disconnect power at the breaker; shut off gas supply if applicable. Allow the oven to cool completely.
• Open the door and remove mounting screws securing the existing vent (locations vary by model).
• Lift out the old vent; reuse existing hardware if in good condition.
• Position the new vent and tighten screws evenly. Wear cut-resistant gloves—edges can be sharp.

This electronic control board is the brain of the appliance, coordinating power and communication between sensors, switches, and electrical loads. Replacing a failed board can restore proper start-up, cycle timing, and responsive controls. What it does:

• Manages program logic and cycle sequencing
• Distributes power to motors, valves, heaters, and fans as commanded
• Interfaces with the user controls/display and monitors sensors and switches
• Common failure symptoms: won't power on or start, unresponsive buttons, cycle won't advance or ends immediately, erratic lights/display, or recurring error codes

• 1 electronic control board

• Disconnect power at the breaker or unplug before servicing; if the appliance uses gas, shut off the gas supply
• Use ESD protection; handle the board by the edges and avoid touching circuitry
• Photograph wiring and move connectors one at a time to the matching terminals
• On some models, post-install programming/model code entry may be required—follow the unit's tech sheet or service instructions

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

This Frame-Glass is the outer glass panel for the oven door, restoring a clean appearance and helping retain heat while keeping the oven cavity visible. It replaces damaged, cracked, or chipped outer door glass. What it does:

• Provides the outer glass surface of the oven door for safe viewing of food while cooking
• Helps maintain oven heat and improve energy containment when the door is intact
• Replaces cracked, chipped, or shattered outer door glass that can affect appearance and safety
• Restores a sealed, clean-facing surface for the door assembly

• Disconnect power to the appliance and allow the oven to fully cool before beginning
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Installation typically requires removing the oven door and detaching trim/fasteners; keep track of screws and clips

The Thermal Fuse is an OEM part for Whirlpool electric wall ovens and ranges. It acts as a safety cutoff switch if excessive internal temperatures are reached.

Causes of a bad thermal fuse can involve repeated heating and cooling cycles degrading internal wiring contacts and insulation over many years. Physical damage during cleaning may also crack casing components.

Symptoms of a bad thermal fuse include:

• Inability to heat or maintain set temperatures
• Circuit breakers that trip unexpectedly  
• Visible burn marks near internal wiring
• Electronic displays or clocks that no longer function

Replacing with a Whirlpool OEM thermal fuse safeguards cooking elements from overheating while preserving appliance dependability. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore wall oven models.