Kodiacdriverwhidbeycom Parts

This bake element replaces the lower heating element in electric ovens to restore consistent baking and roasting heat. It fits compatible ranges and restores normal oven-bottom heating when the element has failed or is damaged. What it does:

• Heats the bottom of the oven to provide baking and roasting heat.
• Restores even cooking when the oven won't reach or hold set temperatures.
• Commonly used when the oven produces no heat, has weak heat, or leaves undercooked bottoms.
• Works with the oven's bake cycle and temperature controls to deliver consistent results.

• One bake (lower) element

• Disconnect electrical power at the breaker or unplug the appliance before starting.
• Remove oven racks and access screws; handle the element and terminal connections carefully to avoid damage.
• Verify tight, corrosion-free terminal connections; replace mounting screws or fasteners if worn.

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

Size: 2.8 fl.oz tube. 748 non-corosive sealant.

This bottom vent trim is the lower kick-panel trim piece that restores the cabinet opening under the appliance for a finished look and proper floor-level airflow management. It replaces damaged, bent or missing lower trim to improve appearance and fit. What it does

• Covers the appliance bottom opening and guides air flow beneath the unit.
• Replaces cracked, dented or warped trim that causes gaps or uneven fit.
• Helps prevent large debris from entering the lower cavity and keeps a finished front appearance.
• Fits where the original lower kick-panel trim has been removed or damaged.

• One bottom vent trim piece.

• Disconnect power to the appliance before starting any repair.
• Typically mounts with existing clips or screws; common hand tools may be required.
• Handle edges carefully; trim pieces can have sharp edges.

Right hand side. For the left side order 814374.

This spacer positions and stabilizes adjacent components to ensure proper alignment and reduce vibration. It provides a simple, durable gap between parts so panels and assemblies fit correctly. What it does

• Keeps panels, trim, or assemblies correctly spaced to prevent rubbing or misalignment
• Maintains proper clearance for doors or moving parts, helping them operate smoothly
• Reduces vibration and noise caused by loose or misaligned components
• Useful when a worn or missing spacer causes rattling, gaps, or uneven seams

• One replacement spacer as pictured

• Disconnect power or unplug the appliance before starting any repair
• Remove the affected panel or assembly to access the mounting location
• Install the spacer in the original position and secure fasteners to factory torque; replace any damaged clips or screws

This glass bracket secures the oven door glass to the door assembly, keeping the glass stable during normal use and helping maintain a proper seal. Replaces a worn or broken bracket to restore door stability and alignment. What it does:

• Holds the oven door glass in place so the door opens, closes, and seals correctly
• Prevents rattling, movement, or misalignment of the inner/outer door glass
• Helps maintain even heat containment by keeping the glass properly positioned
• Commonly replaced when the bracket is cracked, bent, or missing hardware

• Basic hand tools required; avoid over-tightening fasteners which can crack the glass
• Disconnect power to the appliance before removing or servicing the door
• Support the door and glass during removal to prevent dropping or breakage

This door hinge secures and pivots the refrigerator door so it opens and closes smoothly, restoring proper door alignment and seal for reliable cooling performance. What it does:

• Supports the refrigerator door and provides a smooth pivot point for opening and closing
• Helps maintain proper door alignment to ensure a tight seal and consistent internal temperature
• Can prevent or correct door sag, rubbing, or uneven gaps
• Reduces noise or sticking that occurs when the hinge is worn or damaged

• Disconnect power to the appliance before attempting repairs and work with the door supported to prevent dropping
• Use appropriate tools to remove and reinstall hinge fasteners; keep track of any washers or shims
• Verify door alignment and gasket seat after installation; adjust hinge position as needed before fully tightening
• If other hinge hardware is worn or damaged, replace those components to ensure proper function

This meat probe jack is the oven-side connector that accepts the temperature probe to monitor food internal temperature and control cooking. It restores the electrical connection between the probe and the oven control for accurate probe readings. What it does:

• Provides the socket where the temperature/meat probe plugs into the oven control circuit
• Enables the oven to read probe temperature for probe-cooking modes and doneness alerts
• Commonly replaces a jack that is worn, loose, cracked, or not registering probe temperature
• Helps resolve symptoms like probe not detected, intermittent probe readings, or probe error messages

• Disconnect power to the appliance before attempting repair to avoid electrical shock.
• Replacement typically requires access behind the control panel or console; handle display and control components carefully.
• Keep track of mounting hardware and connector orientation; confirm probe detection before reassembling fully.

This mounting bracket is a replacement support bracket that secures appliance components and keeps assemblies aligned for reliable operation. It restores proper fit and helps prevent rattling or movement from loose fittings. What it does:

• Secures panels or assemblies to the appliance frame to maintain proper alignment
• Reduces vibration and rattling caused by loose or damaged supports
• Restores mounting points that prevent sagging or separation of connected parts
• Helps ensure stable operation after repairs involving removed or replaced hardware

• Follow the appliance service manual for exact location and fastener torque
• Disconnect power (and gas if applicable) before beginning any repair
• Use appropriate tools and replace any damaged screws or clips with OEM-equivalent fasteners

This small replacement bumper cushions contact points to reduce noise, prevent wear, and help doors or panels close more quietly and sit flush. Use it to restore proper cushioning where an original bumper is worn or missing. What it does:

• Absorbs shock and prevents metal-to-metal contact that can cause noise or chipping
• Helps doors, panels, or components close more softly and remain properly seated
• Reduces vibration transferred to surrounding parts for quieter operation
• Restores protective spacing to prevent rubbing and premature wear

• Disconnect power to the appliance before servicing and follow the manufacturer's safety instructions
• Typically installs at the contact point; remove the old bumper and press or place the replacement into position
• If the bumper uses adhesive or a fastener, use the same method indicated by the OEM for secure fitment

This genuine replacement screw restores secure mounting of panels and components on Whirlpool appliances, helping stop loose or rattling parts and maintain proper fit. Small but essential fastener for routine repairs. What it does:

• Secures panels, trim, brackets or small components to appliance frames
• Replaces missing, damaged, or stripped screws that cause loose or misaligned parts
• Helps stop vibration noise and restore proper panel alignment
• Provides the correct thread and length for the original mounting location

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• Turn off and unplug the appliance before accessing internal components
• Keep removed fasteners organized so you return them to the original locations

This genuine replacement screw secures appliance components and restores proper fit where the original fastener has worn, stripped, or gone missing. It's a simple, reliable part to help stop rattling and keep panels and assemblies aligned. What it does:

• Fastens panels, brackets, or assemblies to maintain proper alignment and reduce vibration
• Replaces damaged, stripped, or missing screws to restore secure connections
• Helps eliminate rattling, loose trim, or gaps caused by a missing fastener
• Works where the appliance's original screw is required for proper fit

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety procedures before accessing internal parts

This oven light lamp assembly replaces a burned or broken interior oven light so you can clearly see cooking progress without opening the door. Fits compatible Whirlpool-built ranges and ovens that use this OEM-style lamp assembly. What it does:

• Provides interior oven illumination so food and bake performance can be checked without opening the door
• Replaces a cracked lens, damaged socket, or non-functioning oven lamp
• Restores normal lighting when the oven light fails to turn on or flickers
• Helps identify spills, browning, or burn spots inside the oven cavity

• Disconnect power to the appliance before servicing to prevent shock or injury
• Handle the lens and bulb carefully; allow the oven to cool completely before replacing
• Typical replacement requires removing the oven light cover and unplugging the socket.