Kose5000ess05 Parts

This convection baffle directs hot airflow inside the oven for more even cooking and protects the convection fan assembly. Replaces a damaged or missing baffle to restore proper air distribution and reduce rattling. What it does

• Channels hot air from the convection fan for consistent baking and roasting
• Helps keep food and debris away from the fan and heating elements
• Reduces fan noise caused by loose or broken baffles
• Can improve temperature consistency when the convection system is in use

• One convection baffle

• Always disconnect power (unplug or switch off circuit breaker) before servicing the appliance
• Remove oven racks and any interior trim needed to access the fan housing for safe installation
• Inspect mounting points and replace any stripped fasteners for a secure fit

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

Size: 2.8 fl.oz tube. 748 non-corosive sealant.

This glass bracket secures the oven door glass to the door assembly, keeping the glass stable during normal use and helping maintain a proper seal. Replaces a worn or broken bracket to restore door stability and alignment. What it does:

• Holds the oven door glass in place so the door opens, closes, and seals correctly
• Prevents rattling, movement, or misalignment of the inner/outer door glass
• Helps maintain even heat containment by keeping the glass properly positioned
• Commonly replaced when the bracket is cracked, bent, or missing hardware

• Basic hand tools required; avoid over-tightening fasteners which can crack the glass
• Disconnect power to the appliance before removing or servicing the door
• Support the door and glass during removal to prevent dropping or breakage

This door hinge secures and pivots the refrigerator door so it opens and closes smoothly, restoring proper door alignment and seal for reliable cooling performance. What it does:

• Supports the refrigerator door and provides a smooth pivot point for opening and closing
• Helps maintain proper door alignment to ensure a tight seal and consistent internal temperature
• Can prevent or correct door sag, rubbing, or uneven gaps
• Reduces noise or sticking that occurs when the hinge is worn or damaged

• Disconnect power to the appliance before attempting repairs and work with the door supported to prevent dropping
• Use appropriate tools to remove and reinstall hinge fasteners; keep track of any washers or shims
• Verify door alignment and gasket seat after installation; adjust hinge position as needed before fully tightening
• If other hinge hardware is worn or damaged, replace those components to ensure proper function

This meat probe jack is the oven-side connector that accepts the temperature probe to monitor food internal temperature and control cooking. It restores the electrical connection between the probe and the oven control for accurate probe readings. What it does:

• Provides the socket where the temperature/meat probe plugs into the oven control circuit
• Enables the oven to read probe temperature for probe-cooking modes and doneness alerts
• Commonly replaces a jack that is worn, loose, cracked, or not registering probe temperature
• Helps resolve symptoms like probe not detected, intermittent probe readings, or probe error messages

• Disconnect power to the appliance before attempting repair to avoid electrical shock.
• Replacement typically requires access behind the control panel or console; handle display and control components carefully.
• Keep track of mounting hardware and connector orientation; confirm probe detection before reassembling fully.

This mounting bracket is a replacement support bracket that secures appliance components and keeps assemblies aligned for reliable operation. It restores proper fit and helps prevent rattling or movement from loose fittings. What it does:

• Secures panels or assemblies to the appliance frame to maintain proper alignment
• Reduces vibration and rattling caused by loose or damaged supports
• Restores mounting points that prevent sagging or separation of connected parts
• Helps ensure stable operation after repairs involving removed or replaced hardware

• Follow the appliance service manual for exact location and fastener torque
• Disconnect power (and gas if applicable) before beginning any repair
• Use appropriate tools and replace any damaged screws or clips with OEM-equivalent fasteners

This genuine replacement screw restores secure mounting of panels and components on Whirlpool appliances, helping stop loose or rattling parts and maintain proper fit. Small but essential fastener for routine repairs. What it does:

• Secures panels, trim, brackets or small components to appliance frames
• Replaces missing, damaged, or stripped screws that cause loose or misaligned parts
• Helps stop vibration noise and restore proper panel alignment
• Provides the correct thread and length for the original mounting location

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• Turn off and unplug the appliance before accessing internal components
• Keep removed fasteners organized so you return them to the original locations

This genuine replacement screw secures appliance components and restores proper fit where the original fastener has worn, stripped, or gone missing. It's a simple, reliable part to help stop rattling and keep panels and assemblies aligned. What it does:

• Fastens panels, brackets, or assemblies to maintain proper alignment and reduce vibration
• Replaces damaged, stripped, or missing screws to restore secure connections
• Helps eliminate rattling, loose trim, or gaps caused by a missing fastener
• Works where the appliance's original screw is required for proper fit

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety procedures before accessing internal parts

This oven light assembly replaces a damaged or missing interior light lens and housing to restore oven-cavity illumination for safer cooking and easier food monitoring. It fits into the oven ceiling and protects the bulb from heat and spills. What it does:

• Replaces the oven's interior light lens and housing so the light can safely illuminate the cavity
• Protects the bulb from grease, spills, and direct heat
• Helps resolve symptoms like no interior light, cracked or missing lens, and a rattling or loose lens/housing
• Restores proper light alignment and coverage for better visibility when checking food

• Disconnect power to the appliance before starting any work
• Allow the oven to cool completely; the lens and surrounding parts can get very hot
• Handle glass components carefully to avoid breakage; wear gloves and eye protection

This sliding oven rack restores smooth, stable access to cookware in your range or wall oven. Replace a bent, missing, or sticky rack so pans glide out easily for checking, basting, and safer removal of hot dishes.

• Provides a gliding shelf for loading and unloading cookware
• Helps improve access to dishes without reaching deep into a hot oven
• Common signs it's needed: rack won't slide smoothly, binds or sticks, is warped/bent, or is missing
• Restores full oven capacity and convenient use of designated rack positions

• Allow the oven to cool completely before installing; wear gloves to protect hands
• Remove the old rack; identify the correct rail position in your oven cavity
• Insert the new rack in the guides with the proper front/back orientation
• Slide in and out to confirm smooth travel before heating the oven; for any self-cleaning precautions related to racks

The Inner Door Glass is an OEM part for Whirlpool microwaves. It forms the see-through window that allows for monitoring food as it cooks. The strengthened glass panel is designed to withstand prolonged exposure to steam and heat without issues.

Causes of bad inner door glass can include cracks or chips from accidental drops or impacts, or damage from cleaning chemicals or harsh scrubbing that compromise the glass integrity. 

Symptoms of a bad inner door glass include:

• Cracks or chips in the viewing surface
• Complete breakage leaving a hole in the door  
• Loose or improperly sealed glass panel
• Increased potential for leaks near door seals

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwaves.

A replacement blower assembly that moves air through the appliance's drum and vent system to restore proper airflow and drying performance. Installs quickly to address airflow-related issues and persistent noisy operation. What it does:

• Circulates air through the dryer drum and exhaust system to help remove moisture.
• Helps maintain consistent drying times by restoring designed airflow.
• Can help prevent lint buildup from worsening when the fan is worn or damaged.

• Disconnect power (and gas supply for gas models) before servicing to avoid shock or injury.
• Access typically requires removal of the dryer front or rear access panel; keep track of fasteners and wiring connectors.
• Inspect venting and lint traps while servicing; replace damaged ducting and clean lint buildup to protect performance.

The Door Hinge Receiver is an OEM part for Whirlpool ranges. It receives and pivotally mounts the range door hinges, facilitating smooth opening and closing of the door.

Causes of a bad range door hinge receiver include normal wear and tear over time, repeated opening and closing stress, and damage or warping from excessive heat exposure.

Symptoms of a bad door hinge receiver include:

• Cracks or wear on mounting surfaces that could compromise safety
• A loose, wobbly or misaligned range door that does not seal properly
• The door being difficult to open and close smoothly
• Potential for the door to fall off if mounting surfaces fail

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
 

Color: Black