Krfm706ess001 Parts

A flat replacement shim that fills small gaps and realigns appliance components to restore proper fit and reduce vibration. Use it where a thin, precise spacer is needed for better part alignment and quieter operation. What it does:

• Provides a thin, stable spacer to correct minor misalignment between metal parts
• Helps reduce vibration or rubbing caused by uneven panels or mounts
• Restores correct clearance for seals, bearings, or mounting surfaces
• Useful when a worn or missing shim allows parts to sit unevenly

• Disconnect power before servicing; follow your appliance's service manual for disassembly
• Handle edges carefully — shims can be sharp
• Replace any additional shims or related fasteners shown in the model's parts diagram for best results

This clip is a small mounting retainer that secures appliance panels and components to keep parts aligned and reduce vibration. It restores a snug fit for trim, panels, and harnesses so covers stay in place and operate quietly. What it does

• Holds trim, panels or wire harnesses in position to prevent rubbing and rattling
• Keeps access panels and covers aligned for a proper seal and finish
• Prevents electrical harnesses or hoses from sagging or contacting moving parts
• Stops intermittent scraping or vibration noises caused by loose fittings

• Disconnect power to the appliance before replacing the clip to avoid shock or injury
• Replacement typically requires basic hand tools (flat screwdriver, pliers) to remove the old clip and snap the new one into place
• Inspect surrounding trim, fasteners and harnesses and replace any additional damaged clips as needed

Color: White. Size: 13 oz. Spray paint primer. can.

This front pan is the lower cabinet front panel that restores the dryer's front appearance and helps protect internal components from debris and damage. It provides a clean, finished look and a secure mounting surface for door and trim. What it does

• Replaces a cracked, dented, or warped front panel that can allow lint and debris into the cabinet
• Restores proper alignment and fit of the dryer door and surrounding trim
• Helps keep internal components protected from accidental impacts and contaminants
• Improves cabinet appearance when the original panel is damaged or corroded

• One front pan

• Disconnect power (and gas, if applicable) before starting any repair; follow manufacturer safety precautions
• Basic disassembly of the dryer front and door may be required; keep fasteners organized for reassembly
• Use appropriate hand tools; avoid forcing parts to prevent damage to adjacent components

This small foam pad cushions and insulates appliance components to reduce vibration, noise and wear. It helps protect wiring, housings and panels from rubbing or metal-to-metal contact for quieter, longer-lasting operation. What it does:

• Cushions components to reduce vibration and rattling during operation
• Prevents direct metal-to-metal contact that can cause wear or damage
• Provides light thermal insulation and protects wiring or hoses from chafing
• Helps stabilize panels or assemblies for a quieter appliance

• Disconnect power to the appliance before attempting any service.
• Locate the worn or missing pad and remove any residue or debris from the mounting surface.
• Press or stick the new pad into place; some installations may use adhesive—use suitable adhesive if needed.

This genuine replacement wire harness connects and routes power and signals between components to restore proper electrical function and safe operation. Designed to match original wiring layout for a straightforward repair. What it does:

• Replaces a damaged or burned wiring harness to restore electrical continuity
• Restores power/signal paths that can stop intermittent operation or failures
• Helps eliminate arcing, shorts, or loss of function caused by frayed or broken wires
• Maintains correct routing to prevent chafing and overheating when installed correctly

• Disconnect all power (unplug appliance or switch off breaker) before starting work
• Handle connectors by the plug body, not the wires; ensure secure, full seating of terminals
• Route harness along original clips and channels to avoid pinch points or hot surfaces
• Replace any connector, terminal, or mounting hardware that is missing or damaged before powering on

This replacement name plate restores the appliance identification label that shows model, serial and regulatory information. It makes it easy to identify the unit for service, warranty and parts ordering. What it does

• Replaces a torn, faded or missing identification label so model and serial info are readable
• Provides the appliance's regulatory and manufacturing details used for service and registration
• Helps technicians during repairs
• Prevents confusion when buying replacement parts or scheduling service

• Disconnect power to the appliance and move any panels aside only as needed to access the original name plate.
• Clean and dry the mounting area before applying; align carefully to ensure full adhesion and legibility.
• If the original was fastened with screws, rivets or brackets, retain and reuse the proper hardware.
• Avoid touching printed surfaces to prevent smudging; handle with care.

This wire harness supplies the factory wiring connections between appliance components to restore reliable electrical communication and control. It replaces a damaged or faulty harness to help eliminate intermittent power or control problems. What it does:

• Carries electrical signals and power between switches, sensors, motors and control boards
• Restores lost or intermittent connections that can cause controls, lights or components to stop working
• Prevents arcing and unreliable operation caused by frayed, burned or loose wires
• Ensures correct connector fit and factory routing for safe operation

• Disconnect power (unplug or shut off breaker) before starting any repair
• Match connector shapes and routing to the original harness; do not force connectors
• Inspect mating terminals and grounding points; replace or repair damaged terminals per OEM guidance

This slide temperature control is the user-access interface that moves the thermostat connection to select dryer heat levels. It restores responsive, indexed temperature selection for standard slide-style dryer controls. What it does

• Moves the internal contact to select low/medium/high heat settings for the dryer
• Replaces worn or loose slider that causes inconsistent or stuck temperature selection
• Helps correct symptoms such as inability to change heat level, intermittent temperature changes, or a slider that feels loose or won't stay in position
• Works as the mechanical interface between the console knob/lever and the dryer's control assembly

• One slide temperature control (single slider assembly)

• High-level replacement for users comfortable removing control consoles; disconnect power before service
• Handle control panel clips and trim carefully to avoid cracking plastic bezels
• Verify proper seating and alignment of the slider on the control shaft before reassembly

This O-ring seal provides a watertight seal for the appliance's water path, helping prevent leaks and maintain proper operation. Use this exact replacement when the original ring is cracked, flattened, or worn. What it does:

• Creates a pressure-tight seal at a water connection to stop drips and leaks
• Keeps water contained inside hoses, valves or pump fittings
• Restores proper sealing when the original O-ring becomes brittle or deformed
• Helps prevent water damage to cabinetry and flooring from appliance leaks

• One O-ring seal

• Turn off power and water supply before beginning any repair
• Remove the old O-ring and clean mating surfaces of debris and buildup
• Inspect the groove or fitting for damage; replace the part if the mating surface is scored
• If needed, use a small amount of manufacturer-recommended lubricant to ease installation and protect the O-ring

This crisper frame is the trim piece that supports and secures the refrigerator crisper drawer, helping the drawer slide smoothly and stay aligned. Replacing a cracked or warped frame restores proper drawer fit and appearance. What it does:

• Provides the mounting surface and edge trim for the crisper (vegetable) drawer
• Keeps the crisper drawer aligned so it opens and closes smoothly
• Helps maintain a proper seal/fit around the drawer opening to prevent rubbing
• Addresses symptoms such as a loose, cracked, warped, or visibly damaged drawer opening

• One crisper frame (drawer trim) as shown

• Disconnect power to the refrigerator before starting any work
• Remove the crisper drawer and any shelves blocking access; frame typically snaps or screws into place
• Use basic hand tools; avoid forcing the frame to prevent additional damage
• Handle edges carefully and dispose of broken plastic pieces safely

A replacement door stop that cushions and limits an appliance door's movement to prevent over-travel and reduce slamming. Restores smoother door operation and helps protect the hinge and cabinet from damage. What it does

• Acts as a bumper and travel limit for the appliance door to prevent it from opening too far.
• Reduces loud bangs and impact wear when opening or closing the door.
• Helps the door stay aligned and lessens strain on the hinge assembly.
• Common symptom linkage: door slams, door over-rotates, door binding or noisy hinge movement.

• One door stop.

• Disconnect power (or unplug) and ensure the appliance is stable before servicing.
• Basic hand tools may be required; remove any trim or screws securing the old stop before replacing.
• Align and seat the new stop so the door contacts it evenly; test operation slowly after installation.

This wire harness connects the freezer/fresh-food control assembly to the refrigerator's wiring, restoring proper signal and power routing so controls and sensors communicate reliably. Designed to replace a damaged or worn control harness. What it does:

• Routes power and signal between the freezer/fresh-food control board and connected components
• Restores communication to sensors, switches, and control circuits
• Common symptom: control errors, intermittent cooling, or non-responsive controls when harness is damaged
• Prevents intermittent connections caused by frayed wires, broken terminals, or loose plugs

• Disconnect power to the appliance before attempting any repair
• Handle connectors and terminals carefully to avoid bending pins or causing additional damage
• Route harness along original wire paths and secure with existing clips or ties; avoid sharp edges and heat sources

This left-side basket cradle replaces a damaged or worn support that holds and stabilizes a removable basket. It restores proper basket alignment and prevents rubbing or sagging so the basket operates smoothly. What it does:

• Supports the left side of the basket to keep it level and secure during use
• Prevents the basket from rubbing against the cabinet or other components
• Restores proper fit and alignment for smooth sliding and operation
• Helps eliminate noise and uneven movement caused by a broken cradle

• Disconnect power to the appliance before starting any repair
• Remove the basket to access the cradle; retain all fasteners for reassembly
• Align the cradle and snap or fasten it into place; verify the basket slides and seats correctly
• If hardware is damaged or missing, replace with OEM-specified fasteners