Kuc50frpa1 Parts

This rotary start-run switch controls power to the appliance motor. Turning the knob engages the motor circuit to start and keep it running, restoring reliable on/off operation when the original switch wears out.

• Controls motor power using a rotary action
• Replaces a worn or intermittent switch that causes no start, stops, or inconsistent operation
• Helps resolve issues like fan/blower not turning on, cutting out, or only running in certain positions
• Designed for correct fit and dependable switching in compatible units

• Disconnect power before servicing to prevent electrical shock
• Note wire locations or take photos before removing the old switch
• Transfer wires to the same terminals on the new switch; secure connections firmly
• Test operation before reassembling any panels or knobs

This white rotary switch knob restores smooth, accurate control of your appliance's settings. Replace a cracked, stripped, or missing knob to regain a secure grip and positive engagement with the control without replacing the underlying switch.

• Attaches to the rotary control switch shaft; turning the knob selects the setting
• Provides a clear pointer and solid feel for precise adjustments
• Typical symptoms: cracked or missing knob, loose fit, spins without engaging, or hard to select settings
• Fresh cosmetic look to replace yellowed or worn originals

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the shaft; avoid prying against the panel
• Align the knob's insert with the switch shaft shape and press on until fully seated
• Inspect the switch shaft for wear or damage

This deodorant insert helps neutralize and absorb odors inside the appliance, keeping the interior fresher between uses. Replace the insert when its scent fades or odors persist even after cleaning.

• Absorbs and reduces unpleasant smells within the appliance cavity
• Helps control lingering odors between regular cleanings
• Common signs it needs replacement: persistent odors, missing/empty insert, or reduced scent
• Supports a cleaner, fresher-smelling appliance environment

• Disconnect power before servicing for safety
• Open the appliance and locate the deodorant holder or mounting area
• Remove the old insert and snap or seat the new deodorant into place, following holder orientation
• Close the door and restore power

This ram stop is a small control component used in the ram assembly of trash compactors. It limits ram travel so the compactor stops at the correct position and the drawer opens smoothly after each cycle.

• Limits the upward travel of the ram to a fixed stop point
• Helps the ram return fully to the up position at the end of the cycle
• Reduces binding and prevents over-travel that can strain components
• Typical symptoms include a drawer that won't open or is hard to open, or a ram that doesn't return to the top

• Disconnect power to the compactor before servicing
• Remove the drawer/bin for access and support the ram
• Remove the damaged stop and install the replacement, ensuring it is fully seated and correctly oriented
• Run an empty test cycle to confirm the ram stops at the proper height

Almond. Size: 13 oz. can. Acrylic appliance paint.

This switch nut secures a rotary control or switch to the appliance's front panel. Replacing a stripped or missing nut keeps the control stable so the knob turns smoothly and the shaft stays properly aligned.

• Clamps the switch/control to the panel to prevent movement or rotation
• Helps maintain correct knob alignment with dial markings
• Common symptoms: loose or wobbly knob, switch rotates in the panel, missing/damaged nut
• Often needed after service if the original nut is stripped or lost

• Disconnect electrical power before servicing
• Remove the knob and any decorative escutcheon; thread the new nut onto the switch bushing from the front of the panel
• Support the switch from behind while tightening; do not overtighten to avoid panel or switch damage
• Restore power and test control operation

This replacement stud is a factory-specified piece of hardware used to secure components in your appliance. Replacing a worn, stripped, or missing stud restores a solid fit to help reduce looseness and vibration. What it does:

• Provides a mounting point to fasten specified parts or panels
• Helps keep components aligned and secure during operation
• Replaces damaged, corroded, or missing original hardware
• Can resolve symptoms like loose parts, rattling, or misalignment where this fastener is used

• 1 stud

• Disconnect power; shut off water and/or gas supply if applicable
• Access the mounting location per your model's service information
• Start threads by hand to avoid cross-threading; tighten only until snug
• Reuse any original washers, clips, or nuts if required and in good condition

Color: White

This replacement control knob fits over the control shaft to select cycles, temperatures, or functions. It restores a secure grip and clear pointer when the original knob is cracked, stripped, or missing, returning smooth, accurate adjustments.

• Mounts to the control shaft to change and indicate settings
• Replaces knobs that are cracked, wobble, spin freely, or fall off
• Helps with symptoms like difficulty turning the control or inconsistent selections
• Restores a clean, finished look to the control panel

• Disconnect power (and gas, if applicable) before servicing.
• Pull the old knob straight off the shaft—do not twist the control stem.
• Align the D/flat/keyed insert with the shaft and press the new knob on until fully seated—do not force.
• If your original used a spring clip or set screw, transfer/adjust as needed.

Color: Black. Instruction sheet included.

Color: Almond

This Inner Door Panel forms the interior surface of the dishwasher door. Replacing a dented or corroded panel restores proper sealing and structural support for the latch and dispenser, helping prevent leaks and rattling during wash cycles.

• Creates the interior door surface and directs water back into the tub
• Provides mounting points for the detergent/rinse aid dispenser, door latch, and vent components
• Helps maintain a watertight seal when the door is closed
• Replace if rusted, cracked, warped, or if dispenser/latch mounts are broken; may show leaks at the door or unusual rattling

• Disconnect power and water supply before servicing
• Open the door and remove perimeter screws; support the outer door panel as you separate the panels
• Transfer the dispenser, latch, vent, and any insulation/gaskets from the old panel to the new panel
• Reassemble with even screw torque; verify door closes/seals and run a short test cycle to check for leaks

This SPDT rocker switch restores dependable user control of a selected function on your appliance. Replacing a worn or intermittent switch brings back positive engagement and consistent operation. What it does:

• Toggles a single circuit between two positions to control a function
• Restores responsive on/off or selection input at the control panel
• Helps resolve no-response or intermittent operation when the switch is toggled
• Addresses a loose, sticking, or physically damaged rocker actuator

• Disconnect power to the appliance before servicing
• Access the control panel; note wire locations or take a quick photo
• Move wires to the new switch one at a time to maintain correct orientation
• Seat the switch securely in the panel, restore power, and test function

This bearing supports a rotating shaft or assembly inside the appliance, reducing friction for smooth, quiet motion. Replacing a worn bearing helps eliminate noise, restore proper alignment, and prevent damage to mating parts.

• Supports and centers a rotating shaft or hub
• Reduces friction and wear for smoother, quieter operation
• Helps maintain alignment of connected components
• Common failure symptoms: grinding or squealing sounds, vibration or wobble, rough/stiff or seized rotation, excessive play

• Disconnect power before servicing; shut off water or gas if applicable
• Note orientation and retaining hardware before removal
• Use proper tools (puller/press) to remove and seat the bearing squarely—avoid hammering
• Inspect shaft/bore and related seals or spacers; replace worn components before reassembly

Size: 3\8-24 inch.

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.