Kucso3ctsso Parts

This flat metal washer provides a durable spacer and load-bearing surface for fasteners in the appliance, helping maintain proper alignment and reduce wear on mating parts. It's a simple replacement that restores correct assembly spacing. What it does:

• Acts as a load-distributing spacer between fastened components to prevent loosening and wear
• Helps maintain proper alignment of shafts, housings, or assemblies
• Can reduce vibration or movement caused by uneven mating surfaces
• Commonly replaced when hardware is corroded, damaged, or missing

• One flat metal washer (quantity: 1)

• Verify the exact washer size and thickness before installation; replace with the same type
• Tighten fasteners to the manufacturer's torque specifications when known; avoid overtightening
• If used near electrical connections, ensure power is disconnected before working
• Inspect adjacent fasteners and components for wear and replace if necessary

Standard metal hex nut that secures bolts and studs on compatible appliance assemblies. Replaces a missing or worn fastener to restore secure mounting for panels, brackets, and components and reduce vibration or rattling. What it does:

• Secures mating bolts, studs, and threaded fasteners to hold parts in place
• Helps prevent loosening from vibration and normal use
• Common symptom fix: loose panels, rattling or shifting components
• Small replacement part used wherever a matching threaded nut is required

• Hand-start threads to avoid cross-threading; tighten until snug
• Use the correct socket or wrench; avoid overtightening to prevent damage
• Disconnect power or move the appliance to a safe working position when accessing internal hardware

This control panel is the main user interface for your range/oven, letting you set temperatures, timers and cooking modes. Replacing a damaged or unresponsive panel restores reliable control and readable display. What it does:

• Houses the touchpads/buttons and display used to program the appliance
• Sends user commands to the electronic control so bake/clean/timer functions operate
• Commonly replaced for non-responding or intermittent buttons, blank or garbled display, or cracked/damaged panel surface
• Works with the oven/range console assembly to keep settings and user inputs accurate

• One control panel/console

• Disconnect power at the breaker before any service to avoid shock or appliance damage
• Handle the panel carefully to avoid scratching or cracking the display and touchpad surface
• Some models require removing trim, screws, or the oven/range front to access the panel—keep fasteners organized

The Drive Gear Kit is an OEM replacement part for Whirlpool trash compactors. It is an essential component that powers the compaction mechanism. The drive gear kit consists of a series of gears, shafts, and other components that work together to transfer the motor's rotational force to the compaction ram.

Causes of a bad drive gear kit in a trash compactor can include mechanical wear and tear over time, exposure to excessive loads or foreign objects, or damage from improper usage or maintenance.

Symptoms of a faulty drive gear kit in a trash compactor:

• Difficulty in starting or completing the compaction cycle
• Loud grinding or squeaking noises during operation
• Failure of the compaction ram to move or compress waste properly
• Leaks or vibrations due to improper alignment or gear damage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore trash compactor models.

The Actuator Switch Kit is an OEM part for Whirlpool trash compactors. This part activates the compaction cycle when the trash compactor's door is shut and locked, ensuring the unit operates safely and effectively. The actuator switch signals the control system to start the compaction process, an essential step in reducing the volume of waste.

Causes of a malfunctioning actuator switch can include prolonged use leading to mechanical wear, electrical failures within the switch itself, or misalignment issues with the compactor's door. 

Symptoms of a bad Actuator Switch Kit include:

• The compactor fails to start the compaction cycle
• The system starts only intermittently or not at all
• Unexpected halting of the compaction process
• The need to manually engage or adjust the switch to start the cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement container restores a secure, factory-fit compartment in your appliance. Install a new container when the original is cracked or broken to keep contents properly held and nearby parts aligned as designed.

• Provides the designated compartment to hold contents securely
• Interfaces correctly with its mounting points, guides, or adjoining parts
• Replaces cracked, warped, or broken containers that won't stay seated
• Helps prevent spills, jams, or interference with nearby components

• Disconnect power to the appliance; shut off water supply if applicable
• Wear cut-resistant gloves—damaged plastic edges can be sharp
• Move any screws, covers, or inserts from the old part to the new one
• Align tabs, tracks, or snaps and press into place without forcing

This door lock latch assembly secures the washer door during operation so cycles can run safely and water stays contained. It replaces a worn or damaged latch to restore proper door locking and cycle start. What it does

• Secures and locks the washer door during wash and spin cycles so the appliance can operate normally.
• Triggers the door-closed sensor/switch that allows the washer to start and continue a cycle.
• Helps prevent accidental door opening and reduces the risk of leaks during operation.
• Common symptoms indicating this part may be needed: washer won't start, door won't latch or lock, or the latch feels loose or broken.

• Always disconnect power to the appliance before inspecting or replacing the door lock latch.
• Handle the door and glass carefully to avoid damage; align the latch with the strike before tightening fasteners.
• After installation, test a short cycle (no clothes) to ensure the door locks and the washer starts properly.

This bracket kit secures and supports internal appliance components to keep panels and assemblies aligned for reliable operation. It replaces worn or damaged brackets so parts stay firmly in place and reduce movement or noise. What it does:

• Provides a mounting point to secure panels, assemblies or components
• Restores proper alignment and prevents shifting during operation
• Reduces rattling, vibration, and loose or sagging panels
• Helps maintain safe, stable function of the related assembly

• Turn off power and unplug the appliance before starting any repair
• Use basic hand tools; follow model-specific disassembly steps
• Keep fasteners and small parts organized during removal and reassembly