Kuix335hp500 Parts

6 - 19 x .250

This filter cover secures the appliance's water filter in its housing to help maintain a proper seal and direct water flow. It replaces a cracked, missing, or damaged cover so the filter can function correctly. What it does:

• Holds the water filter in place to ensure a reliable seal and prevent bypass
• Directs water flow through the filter for proper filtration
• Helps prevent leaks or drips at the filter housing when intact
• Replaces covers that are cracked, warped, or unable to latch securely

• Turn off water supply and unplug the appliance before replacing the cover.
• Remove the old cover by releasing any tabs or fasteners; align new cover and press until it snaps or latches.
• Use basic hand tools only; do not force parts—if it doesn't seat easily, check correct orientation.
• If you see ongoing leaks after installation, re-check the filter seating and housing for damage.

This replacement screw secures appliance panels and small components, restoring proper fit and stability. Use it to replace a missing or damaged fastener so doors, panels, or brackets stay aligned and rattle less. What it does

• Fastens panels, brackets, or trim pieces to the appliance frame
• Stops loose or rattling panels caused by a missing or stripped screw
• Helps restore secure mounting for switches, controls, or trim
• Suitable as a direct replacement when the original screw is lost or damaged

• Disconnect power before working on any electrical appliance
• Use the correct driver bit to avoid stripping the head
• Align parts before tightening and snug—do not overtighten to prevent damage
• Keep any removed hardware organized for reassembly

The Hinge is an OEM component specifically designed for Whirlpool under-counter ice machines. Located internally at the join of the service door and ice bin compartment, the precisely calibrated hinge reliably mounts the access points. 

Machined from corrosion-resistant stainless steel, each hinge incorporates dual raised spring-loaded pivot pins that oscillate within lube-filled bushings. Their consistent torque mechanism provides balanced movement to the heavy service door.

Symptoms of a bad hinge include:

• Binding or sluggish service door movement
• Excess vibration during opening/closing cycles  
• Premature failure of door seals from misalignment

Replace with this authentic OEM Whirlpool hinge to maintain smooth access for maintenance. Rely on its sustain calibration to support the weight of large service panels and consistently produce crystalline ice. Compatible with additional undercounter brands including Manitowoc, Scotsman, and Follett.

This wrap door is the outer panel that restores the appliance's front appearance and protects internal door components. It replaces a dented, cracked, or cosmetically damaged door surface to make the appliance look and seal properly. What it does:

• Covers and protects the door frame and internal components from damage and wear
• Restores a smooth, finished exterior after dents, cracks, or peeling paint
• Helps maintain proper door alignment and contact with the cabinet trim
• Reduces air and moisture gaps caused by warped or damaged outer panels

• Remove power (and gas if applicable) before starting any door repair
• Handle the panel carefully to avoid scratching the finish during installation
• Follow the appliance manufacturer's service instructions for disassembly and reassembly
• If hinges, screws, or clips are damaged, replace them with the correct parts for a secure fit

The Ice Machine Overload is an OEM component specifically designed for Whirlpool under-counter ice makers. This overload protects the ice maker's compressor by interrupting power if it overheats due to excessive run time or a blockage of airflow. 

Causes of a bad overload include failure over time due to heat exposure, physical damage that impairs its ability to sense temperature or breakdown of internal electrical components.

Symptoms of a bad overload include:

• No ice production despite the icemaker being powered on  
• A buzzing or humming sound coming from the ice maker
• Tripping of the circuit after initial power-on
• Ice maker run time but no ice dispensed or harvested

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bracket-Pump,Recirc is an OEM part for Whirlpool ice machines. This bracket ensures that the pump is properly aligned and secured, facilitating the efficient circulation of water needed to produce ice.  

Causes of a malfunctioning Bracket-Pump,Recirc may include:

• Corrosion due to prolonged exposure to water and chemicals, leading to material degradation.
• Physical damage, which can occur during cleaning or maintenance activities.
• Wear and tear over time, which is natural for mechanical components but can lead to loss of structural integrity.

Symptoms indicating the need for replacement include:

• Excessive vibration or noise from the ice machine, suggesting that the pump is not securely mounted.
• Reduced ice production or inconsistencies in ice quality, which can result from inadequate water circulation.
• Visible damage or wear to the bracket, indicating it can no longer provide proper support.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This condenser fan blade moves air across the refrigerator's condenser coil and compressor to remove heat, helping the unit cool efficiently. Replace a cracked, warped, or loose blade to restore proper airflow and reduce noise.

• Circulates air through the condenser section to dissipate heat from the refrigerant
• Supports stable fridge and freezer temperatures and efficient compressor operation
• Common symptoms: rattling/scraping noises, weak or no airflow at the rear/bottom, longer run times, or warming compartments
• Replace if the blade is cracked, warped, wobbling, or loose on the motor shaft

• Disconnect power and pull the refrigerator away from the wall; remove the rear access panel to reach the condenser fan
• Note the original blade orientation/rotation; remove the old blade from the motor shaft (release any retainer if present)
• Press the new blade onto the shaft until fully seated; ensure it spins freely with proper clearance and airflow direction
• Reinstall the panel, restore power, and verify normal airflow and sound

This transformer assembly converts household AC power to the specific voltage required by the appliance's internal circuits, helping restore stable operation of affected functions. Replace a failed transformer to resolve power delivery issues and prevent repeat fuse or breaker trips. What it does

• Steps voltage up or down to supply proper power to designated circuits
• Delivers stable power to components such as controls, relays, or other loads
• Failure symptoms may include: dead display or no operation, certain features not working, repeated fuse/breaker trips, electrical odor, or abnormal humming

• 1 transformer assembly

• Disconnect power before servicing; capacitors in the appliance can retain a dangerous charge—discharge per the service manual
• Label/photograph wiring and transfer one lead at a time to the new transformer
• Transfer the original mounting hardware/brackets from the old unit
• If a fuse opened, diagnose and correct the underlying cause before reapplying power

This recirculation cover bracket secures the recirculation cover and helps maintain proper positioning of the recirculation components. Replacing a damaged bracket restores secure fit and reduces rattling or loose parts. What it does:

• Holds the recirculation cover in place to prevent shifting during operation
• Keeps internal components aligned for reliable recirculation assembly fit
• Prevents rattling or vibration caused by a cracked or broken bracket
• Helps avoid damage to the cover or nearby components from a loose mount

• Disconnect power to the appliance before beginning any repair
• Remove the access panels necessary to reach the recirculation cover per the service manual
• Replace the bracket using basic hand tools; retain original fasteners unless damaged

This articulated bottom hinge assembly replaces a worn or damaged refrigerator hinge to restore smooth door movement and alignment. It helps doors open and close reliably, reducing sagging and uneven sealing. What it does:

• Supports the lower corner of the refrigerator door and enables smooth pivoting motion
• Restores proper door alignment to help maintain an even freezer/refrigerator seal
• Commonly replaced when doors sag, bind, or make grinding/noisy movement
• Works as the mechanical pivot point that transfers door weight to the cabinet

• One articulated bottom hinge assembly

• High-level replacement; disconnect power and empty or secure the door before starting
• Use appropriate tools and handle ties or springs with care to avoid pinching

This refrigerator door handle provides a reliable grip for opening and closing the fridge door and restores a finished look after the original handle is cracked, loose, or damaged. It's a direct-fit replacement designed for easy swap-out. What it does:

• Restores secure, comfortable grip for normal door operation
• Replaces cracked, broken, loose, or cosmetically damaged handles
• Helps prevent door damage from continued use of a compromised handle
• Matches original mounting points for proper alignment and function

• Turn off power to the appliance or unplug before starting any service that may expose wiring or lights
• Use basic hand tools; save original screws and hardware when possible
• Support the door while removing/installing the handle to avoid stress on hinges