Lat8705aam Maytag Washer Parts

I ordered a pressure switch and a pressure hose. It just took a few minutes. Read more

• Leaking

Perfectly! Replacing Agitator Shaft is not for the faint of heart. Replacing output shaft pinion gear on the bottom of the agitator shaft requires care, experience and patience with pressing/driving drift pins without damaging the gear itself. One slip of the drift/punch or press apparatus will ruin the gear/teeth face and will lead to failure of the transmission internally when put back into service. As best as I can tell the pinion gear is discontinued and no longer available so take care!... Read more

Using your video then calling Tina, who researched a part I had that wasn't in video or parts list. She had me send in a picture and researched then called me back. The part was redesigned. She was very helpful. Read more

Before I took it apart I thought it had a broken tub tensioner spring. After some research, I thought it might be worn damper pads. Upon disassembly I found the springs and pads intact, pretty amazing for a 25 year old machine. All I did was re-lubricate the pads and put everything back together and give the spring adjusters a half a turn more tension. Test ran two loads and it ran perfect. As a side note, the springs that came and were supposed to be for my machine were too short, smaller... Read more

I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more

Order a new one. fix problem... Read more

This washing machine is 19 years old, had water leaking from tub seal. Not the most difficult job I have ever done but installing the tub and bolting to brackets is in a tight space for 2 of them and took about six hours due to checking disassembling and re-assembling on computer. In the end it probably saved me $800.00 that a new machine would have costs figuring a new would cost close to one thousand for a good one. The repair man I use did not want to get involved in the repair but wanted to... Read more