Ldf 7810St Parts

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

A direct-replacement interior tray that provides a stable surface inside the appliance to hold dishes and catch spills. Replaces a cracked, warped or missing tray to restore a secure, easy-to-clean cooking or storage surface. What it does:

• Provides a level surface to hold food, pans or containers inside the appliance
• Helps contain spills and crumbs for easier cleanup and maintenance
• Restores correct fit and support when the original tray is damaged or missing
• Eliminates wobbling or instability caused by a broken or warped tray

• Always disconnect power to the appliance before servicing
• Remove any food, cookware and the damaged tray before installing the replacement
• Set the tray into position, aligning any tabs or slots; most tray installs are tool-free
• Handle carefully if the tray is glass or brittle; discard the damaged tray safely

The Control Board Assembly is an OEM replacement part for LG dishwashers. As the central electronic control unit, it governs all dishwasher functions like wash cycles, heating, water inlet and drainage. The control board receives inputs from sensors to power relays, motors and send output signals accordingly.

Symptoms of a faulty control board include:

• Failure to start or complete cycles 
• Inoperative or faulty display/buttons
• Unusual noises from improperly regulated components  
• Inability to sense soil levels or temperature accurately

Common causes are moisture damage, loose connections leading to shorts, and standard wear over time under high-heat working conditions.

This authentic LG part is also compatible with select Kenmore brands. 

This PCB assembly is the appliance's main control board that manages cycle commands, sensor signals and user inputs to keep the appliance operating correctly. Replacing a faulty board restores control and communication functions. What it does:

• Receives inputs from the control panel and sends commands to motors, valves and heaters
• Monitors sensor signals and timing functions to coordinate cycles
• Stops operation or causes errors if the board fails or loses power
• Common symptom link: unresponsive controls, error codes, or appliance that won't start

• One PCB assembly (control board)

• Disconnect power before starting and verify power is removed to avoid shock
• Handle the board carefully and avoid touching components or connectors; observe electrostatic discharge (ESD) precautions
• Inspect connectors and wiring for damage and ensure secure connections during reassembly

This OEM replacement part is an outer door panel assembly for dishwashers. The outer door assembly is the outer door panel of the dishwasher that protects the wiring and electrical components found inside the dishwasher. If the outer door panel is cracked or visibly damaged, then it will need to be replaced. To start, make sure the dishwasher is unplugged. After that, open the dishwasher door and locate the screws that attach to the outer panel. Unthread the screws and proceed to remove the outer panel. After it's been removed, take the new panel and line it up with the screw openings. Proceed to fasten the screws to secure the outer door panel.This genuine replacement part is sold individually and is sourced directly from the manufacturer. This part is compatible with LG brand dishwashers.

This water guide directs water through the dispenser/ice path so water flows where it should, helping prevent leaks and misdirected dispensing. It's a small molded channel designed to route cold water inside the refrigerator. What it does:

• Guides and channels water from the supply toward the dispenser or ice-making area
• Helps prevent water from dripping into areas it shouldn't and causing puddles
• Supports consistent dispensing by keeping the water path aligned
• Commonly replaced when cracked, warped, or when water is leaking or pooling

• One water guide piece as shown

• Disconnect power and shut off the water supply before replacing
• Remove any interior shelves or panels as needed to access the guide
• Handle carefully to avoid damaging mounting tabs or adjacent seals
• Secure all clips; test dispenser and check for leaks after installation

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.
 

This drum roller supports the dryer drum for smooth rotation and quieter operation. Replacing a worn roller helps reduce noise and drum wobble so the dryer runs more reliably. What it does:

• Supports the drum rim and allows the drum to spin smoothly under load
• Reduces squeaks, thumps and vibration caused by worn or damaged rollers
• Helps prevent uneven drum wear and excessive belt stress
• Works as a direct replacement for the factory roller in compatible dryers

• Disconnect power (and gas, if applicable) before beginning any service
• Access the roller per the manufacturer's service instructions (panel/drum removal is typically required)
• Inspect the drum, belt and other rollers/shafts while the unit is open; replace any worn components
• After installation, rotate the drum by hand to ensure smooth movement before reassembly

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

• Provides a protective enclosure for control boards, switches and user interface components
• Restores a secure, stable mounting point for buttons, levers and display elements
• Helps prevent dust, moisture and debris from reaching internal electronics
• Can resolve loose or damaged control bezel issues and improve appliance appearance

• Handle carefully to avoid scratching the visible surfaces and damaging tabs or mounting points
• Power off and unplug the appliance before starting work to reduce risk of shock
• Retain and reuse any clips, screws or gaskets from the original part unless replacements are supplied

This rail assembly supports and guides a moving component inside the appliance, helping parts slide smoothly and stay aligned for reliable operation. It replaces worn or damaged rails to reduce noise and misalignment. What it does:

• Provides a stable track for the appliance component to slide or roll on
• Restores proper alignment to reduce binding, scraping, or grinding noises
• Helps maintain smooth movement and consistent operation during cycles
• Prevents uneven wear on adjacent parts caused by a damaged rail

• Disconnect power (and water, if applicable) before servicing
• Basic hand tools may be required; follow the appliance service manual for disassembly/reassembly
• Handle carefully to avoid sharp edges and to prevent damage to surrounding components

This blower cover is the outer housing piece that directs airflow from the blower assembly and protects the fan motor and internal components. It helps maintain proper airflow path and reduces contact with moving parts. What it does:

• Directs and channels airflow from the blower to the unit's vents for efficient circulation
• Protects the blower wheel and motor from debris and accidental contact
• Helps reduce rattling and vibration when the cover is intact and properly seated
• May cause decreased airflow or unusual noise if cracked, warped, or missing

• Disconnect power to the appliance before performing any service
• Typically installed with a few screws or clips after removing the front grill or access panel
• Handle plastic tabs gently to avoid breakage; align clips before tightening fasteners

This inlet hose connects the home's water supply to the appliance, allowing proper water fill for cycles. Replacing a worn or damaged inlet hose restores reliable water delivery and helps prevent leaks at the connection. What it does:

• Channels incoming water from the household supply into the appliance for normal fill cycles.
• Replaces hoses that are cracked, split, kinked, or leaking at the fittings.
• Helps stop intermittent or constant water leaks originating at the inlet connection.
• Restores proper water flow when low or no fill is caused by a compromised hose.

• Turn off the home's water supply and unplug the appliance before beginning any work.
• Inspect fittings and replace any damaged clamps or seals; hand-tighten then snug with a wrench—do not overtighten.
• Check for leaks after reconnecting water and restoring power; monitor during the first cycle.

This upper dishwasher rack holds dishes, cups and small items securely in the dishwasher, restoring proper loading and spray access for better cleaning. Designed as a direct replacement rack to return stable, organized loading. What it does:

• Replaces a damaged or bent upper dishwasher rack so dishes sit level and slide properly
• Restores proper water spray reach and deters tipping or shifting of items during cycles
• Helps prevent scratches and chips by keeping items separated and supported
• Works with standard upper-rack rollers and track guides for smooth in-and-out movement

• One upper dishwasher rack

• Remove power and, if applicable, disconnect water supply before starting service
• Slide rack out and unclip or lift from the rail assembly per your model's rail design
• Inspect rollers, tracks and mounting hardware; replace any worn components for reliable operation
• Reinstall by aligning rack on rails and testing for smooth travel before running a cycle

This rack assembly replaces a damaged or worn dishwasher rack to securely hold dishes while cycling. It restores stable dish placement and smooth rack movement for reliable cleaning performance. What it does:

• Provides a stable platform to hold plates, bowls and cookware during wash cycles
• Restores proper rack alignment and prevents tipping or crowding of items
• Enables smooth in-and-out rack travel when rollers and glides are intact
• Helps prevent dishes from falling or colliding, reducing chipping and breakage

• One rack assembly as shown

• Remove dishes and racks before beginning; follow manufacturer instructions for rack removal
• Inspect and replace any worn rollers, clips or glide parts as needed for proper operation
• Reinstall carefully, ensuring the rack seats and slides engage correctly

The HARNESS, MULTI is an OEM component specifically designed for LG dishwashers. As an integrated wiring bundle, it facilitates synchronized communication between various dishwasher functions during cycles. Smooth signal transmission between heaters, pumps, controls, and other systems is necessary for optimized washing and sanitization.

Causes of a bad multi-function harness can include physical damage over time from rubbing or chafing insulation. Prolonged exposure to moisture, detergents, and rinse agents may also degrade individual wire coatings. 

Symptoms of a bad multi-function harness include:

• Failure of individual wash components to operate as designed
• Repeated error codes and incomplete or ineffective cycles  
• Strange noises or behaviors as systems experience disruption  
• Inability to fill or drain efficiently 

Replace yours today with this genuine LG wiring solution. Coordinated multi-component operation restores thorough cleaning performance. Compatible with Sears/Kenmore dishwashers as well.