Lfc24770 Parts

A replacement door gasket assembly that seals the refrigerator door to help maintain internal temperature and reduce energy loss. Restores a proper door seal to help keep food fresher and reduce cooling strain. What it does:

• Forms a tight seal around the refrigerator door to minimize cold-air loss and help maintain set temperatures.
• Helps prevent frost buildup and condensation inside the fresh-food compartment when the seal is compromised.
• Can reduce cycling frequency and excessive run time caused by a damaged or worn door seal.
• Common symptoms of a failing gasket: visible gaps, cold spots, frost or ice buildup, or condensation on the door edges.

• Disconnect power to the appliance before starting any repair.
• Remove food and door-mounted items as needed for safe access and handling.
• Align the gasket into the door channel, working it evenly around the perimeter so it seats fully; some distortion may correct after a short run time.

This hinge cover is a cosmetic and protective trim piece that snaps over the door hinge to hide hardware and protect the hinge area from dust and damage. It restores the finished look and helps keep the hinge area cleaner. What it does:

• Covers and protects the door hinge hardware from dust, spills, and everyday wear
• Conceals exposed screws and components for a finished appearance
• Reduces chance of items catching on the hinge area and causing damage
• Helps stop light rattles or vibration noise caused by loose or damaged trim

• Install by snapping the cover over the hinge; may require lightly prying off the old cover first
• Inspect hinge screws and hinge pin; tighten if loose before installing the cover
• Use basic hand tools; disconnect power only if you will be working near electrical components
• If cover is cracked or broken, replace to avoid interference with door operation

This replacement door gasket assembly seals the refrigerator door to help maintain proper temperature and reduce energy loss. It restores the seal around the door edge for better cooling performance and food preservation. What it does:

• Creates an airtight seal around the refrigerator door to limit cold air escape
• Helps maintain consistent internal temperature for food safety
• Reduces frost buildup and excessive compressor run time when working properly
• Addresses symptoms such as warm spots near the door, visible gaps, or persistent condensation

• One door gasket assembly

• Inspect the door and mounting channel for debris before installing; clean with mild detergent and dry completely
• Gasket typically stretches into a channel and secures around the door perimeter—avoid sharp tools that can damage the seal
• For best results, install at room temperature; warm the gasket gently if needed to ease fitting

This holder secures the dryer-related assembly in place to reduce movement and wear, helping maintain proper alignment and quieter operation. It's a simple replacement that restores part stability in the appliance. What it does:

• Secures a dryer assembly or component to the appliance frame to prevent shifting
• Helps reduce vibration and rubbing noises caused by a loose part
• Maintains correct alignment so related parts operate smoothly
• Used when the existing holder is cracked, broken, or missing

• Disconnect power before replacing any dryer components to avoid shock or injury
• Access location and removal steps vary by model; follow the appliance's service manual or exploded view
• Keep fasteners and adjacent parts organized for reassembly; replace any damaged clips or screws

This replacement door basket mounts on the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, damaged, or missing.

• Attaches to the inner door rails to organize items on the door
• Keeps contents in place as the door opens and closes
• Replaces a cracked, broken, warped, or missing bin
• Symptoms include broken tabs, bin won't stay seated, or reduced door storage

• Remove items from the old bin; lift up to release it from the door rails
• Align the new basket's hooks with the door slots and lower until fully seated
• Confirm the bin is level and secure before loading
• No tools typically required; avoid overloading to prevent damage

This rail guide assembly replaces a worn or damaged drawer/rack guide to restore smooth, stable movement and help prevent the rack or drawer from binding or coming off track. Fits original mounting points for a direct replacement. What it does:

• Guides and supports the drawer or rack so it slides in and out smoothly
• Helps keep the rack/drawer aligned to prevent derailment or sticking
• Replaces broken or worn plastic or metal guide components that cause noisy or rough movement
• Restores intended fit and function of the sliding mechanism

• Disconnect power and remove contents from the drawer/rack before starting any work
• Basic hand tools may be required; follow OEM instructions for orientation and attachment
• Inspect mating slides and fasteners; replace any damaged clips or screws for secure fit

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight enclosure and help maintain consistent cooling. It provides a new pliable sealing surface that reduces air leaks and helps prevent frost or moisture buildup. What it does:

• Creates a full seal around the refrigerator door to minimize cold air loss and warm air intrusion.
• Helps reduce frost buildup, water pooling, and excessive compressor run time caused by a leaking seal.
• Restores proper door contact when the original gasket is torn, deformed, or no longer magnetically sealing.
• Improves temperature stability for better food preservation and energy efficiency.

• One door gasket assembly

• Disconnect power to the appliance before starting and follow manufacturer safety guidelines.
• Inspect and clean the gasket channel and door surface before installing the new seal for best fit.
• Align the gasket into the channel and press evenly; some models may require loosening the door or removing trim for access.

This hinge cover protects and conceals the washer's lid hinge assembly for a clean look and safer operation. It helps keep debris out of the hinge and restores the cabinet appearance after damage. What it does:

• Covers the lid hinge to protect internal hinge components from dirt and damage
• Conceals exposed hardware for improved appearance and user safety
• Restores smooth lid operation when original cover is cracked, broken, or missing
• Reduces rattling and contact between the lid and hinge area

• Disconnect power to the appliance before starting any repair
• Remove any screws or clips securing the old cover and gently snap or slide the replacement into place
• Use basic hand tools; keep small hardware organized for reassembly
• If hinge hardware is damaged or binding, inspect and replace those parts as needed for proper operation

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore an airtight closure and help maintain proper cooling. It fits the door's perimeter and creates the seal between the cabinet and door. What it does:

• Seals the refrigerator door to retain cold air and improve temperature stability.
• Prevents warm air intrusion that can cause frost buildup or increased energy use.
• Helps reduce condensation and water leaks around the door area.
• Restores proper door alignment and closing when old gasket is torn, stretched, or deformed.

• Unplug the appliance and remove food from the door area before starting.
• Work with the door propped or supported; follow OEM removal steps for existing gasket tabs or clips.
• Gently warm and flex the new gasket if needed for easier seating; avoid sharp tools that can puncture it.
• After installation, check the seal around the full perimeter and allow a short run cycle to verify proper operation.

This Tray Assembly is the replacement vegetable-drawer pan that holds produce and helps contain spills inside the fridge. Restores a secure storage surface so fruits and vegetables sit level and are easier to organize. What it does:

• Replaces a cracked, warped or broken vegetable drawer pan that no longer supports produce
• Contains leaks and small spills to help keep the refrigerator interior cleaner
• Provides a stable base for crisper/vegetable drawers to slide and sit properly
• Helps restore proper drawer alignment and prevents items from falling through gaps

• Remove fresh food and open/slide out the affected drawer; lift to disengage and remove the old pan
• Align new tray with drawer rails and slide in until it seats; verify smooth operation before loading
• Handle glass or brittle plastics with care to avoid chips or cracks during installation