Lfns22520s Parts

This replacement inlet hose carries water from your household supply to the washer, restoring proper fill and preventing leaks. Use it when the washer fills slowly, won't fill, or shows water leakage at the connection. What it does:

• Channels hot and/or cold water from the household supply to the washer's inlet valve
• Restores normal fill behavior when an old or damaged hose causes slow or no fill
• Stops leaks caused by cracked, split or deteriorated hose sections or fittings
• Helps prevent water damage from a failed or leaking supply connection

• Turn off household water supply and unplug the washer before replacing the hose
• Hand-tighten fittings, then snug with a wrench—do not overtighten to avoid damaging threads
• Inspect and replace any damaged washers or seals at the connections

This DC stepping motor assembly drives precise, incremental movement in the appliance's subsystem to restore correct mechanical positioning and timing. Replacing a failed stepping motor brings back accurate, repeatable motion and reduces related errors. What it does:

• Converts electrical signals into precise, step-wise rotation for controlled mechanical movement
• Restores accurate positioning when the appliance stops mid-cycle or fails to advance
• Can stop intermittent operation, humming, or lack of movement caused by a faulty motor
• Clears related error codes or cycle faults that point to motor or position problems

• One complete DC stepping motor assembly

• Disconnect power before servicing to avoid shock or short circuits
• Verify the motor harness connector and orientation before removal and reinstallation
• Handle the motor and gear interfaces carefully to avoid damage to mating parts

This replacement detergent dispenser hose carries liquid detergent from the dispenser to the washer tub, restoring proper detergent flow and preventing leaks or dispenser buildup. Fits as the direct hose between the dispenser assembly and the wash tub. What it does:

• Routes detergent from the dispenser to the tub so detergent reaches the wash load
• Replaces cracked, kinked, clogged, or leaking dispenser hose
• Helps stop leaks that can occur under the dispenser or inside the cabinet
• Restores normal dispenser operation when the original hose is damaged or obstructed

• One detergent dispenser hose

• Disconnect power to the washer before beginning repair
• Turn off water supply and access the dispenser area per your model's service instructions
• Remove old hose clamps and routing carefully; install new hose with secure clamps and correct routing to avoid kinks

This self-tapping screw secures panels and components on Speed Queen laundry appliances, restoring firm fastening and preventing rattles or gaps. Compact 8-18 x 3/8 size for use where a small, hex-washer-head fastener is required. What it does:

• Cuts its own mating thread in sheet metal or plastic mounting holes for a secure fit
• Holds control panels, trim pieces, and light brackets in place
• Replaces missing or damaged fasteners that cause loose or vibrating panels
• Helps restore proper panel alignment and reduces noise from loose parts

• Disconnect power before servicing the appliance
• Use the matching hex-washer driver or nut driver to seat the screw
• Start straight and apply steady pressure; avoid cross-threading
• Do not overtighten — snug until panels are secure

This replacement water inlet hose connects the home's water supply to the washer, restoring reliable water flow and preventing leaks at the rear hookup. Use when the original hose is cracked, split, or leaking. What it does:

• Carries incoming water from the fill valve to the tub for normal wash cycles
• Stops leaks caused by worn, cracked, or split inlet tubing
• Helps restore proper water fill when low or no-fill symptoms occur
• Matches OEM routing and connection points for a direct fit

• Disconnect power and shut off the water supply before beginning.
• Inspect and replace any worn clamps or fittings; tighten connections by hand then snug with a tool—do not overtighten.
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks.

This replacement dispenser handle restores a washer's detergent/bleach dispenser drawer to normal operation and appearance. Durable white finish matches original trim and lets you open and close the dispenser reliably. What it does:

• Replaces a cracked, broken or missing dispenser drawer handle so the dispenser can be opened and closed
• Restores proper grip and lever action for dispensing detergent or bleach
• Helps prevent leaks or product spillage caused by a loose or non-functioning handle
• Matches original white styling for a clean look on the control panel area

• One white dispenser handle

• Disconnect power to the appliance before beginning any repair
• Many installs are simple: remove the dispenser drawer or access panel to swap the handle; low-level hand tools may be required
• Handle clips or screws should be secured firmly but not over-tightened
• If you encounter any broken mounting tabs or hidden fasteners, stop and consult a detailed repair guide.

This replacement porcelain touch-up paint restores small chips, scratches and worn spots on enamel-coated appliance surfaces to help improve appearance and slow surface corrosion. Easy to apply for spot repairs. What it does:

• Covers small chips, scratches and scuffs on porcelain/enamel surfaces
• Helps protect exposed metal from moisture that can lead to surface rust
• Matches factory finish color on compatible porcelain-coated panels (spot repairs only)
• Useful for finishing edges around dings and improving visual appearance

• One bottle of porcelain touch-up paint

• Clean and dry the repair area thoroughly; remove loose paint and rust before applying
• Test paint in an inconspicuous spot to confirm color match and adhesion
• Apply sparingly with a fine brush or applicator; allow recommended drying time between coats
• Keep away from open flame; store and dispose of per local regulations; keep out of reach of children

This pressure sensor harness is the wiring assembly that connects the water-level (pressure) sensor to the washer's control board so the machine can detect and regulate water level properly. Replaces a damaged or worn harness to restore reliable level sensing. What it does:

• Carries the electrical signals between the pressure sensor and control board so the washer reads water level correctly.
• Helps prevent incorrect fills, overfilling, or failure to advance cycles caused by intermittent or open wiring.
• Can stop error codes or faulted cycles related to pressure-sensing circuit faults when the harness is the root cause.
• Maintains secure connector fit and signal integrity compared with frayed or corroded wiring.

• One pressure sensor wiring harness

• Disconnect power to the appliance before starting work to avoid shock or damage.
• Remove access panels as needed and unplug connectors at the pressure sensor and control board; note routing for reinstallation.
• Replace only the failed harness; avoid stretching wires or pinching during re-route and secure with existing clips.

A small rubber pressure bulb that connects to the washer's air hose to help the machine detect and control water level. Replaces a cracked or collapsed bulb to restore reliable fill and spin cycles. What it does:

• Senses water level changes by transmitting air pressure to the washer's pressure switch
• Helps the washer start and stop filling at the correct levels
• Commonly fails when cracked, hardened, or leaking, causing overfill, underfill, or no-fill symptoms
• Works with the machine's pressure tubing and switch to maintain proper cycle operation

• One pressure bulb

• Disconnect power and turn off water before starting any repair
• Inspect and replace any damaged tubing when installing the bulb for a secure air-tight fit
• Avoid sharp bends or pinches in the air hose; ensure connections are properly seated

This motor and rod assembly replaces the drive motor and attached rod for compatible Speed Queen commercial washers, restoring agitation and spin force for normal wash cycles. It's a direct-fit motor kit designed for machines that use the Mamba 1/4 R configuration. What it does

• Replaces a worn or failed drive motor to restore agitation and spinning functions.
• Stops or reduces symptoms like no-agitate, no-spin, weak or intermittent agitation, or a humming motor with no drum movement.
• Eliminates excessive drive noise or vibration caused by a failing motor/rod assembly.
• Restores normal belt/drive engagement where applicable (helps re-establish proper mechanical linkage).

• One motor and rod assembly.

• Always disconnect power before beginning service to avoid electrical shock or injury.
• Basic hand tools required; installation may require lifting the cabinet or drum depending on model.
• Follow the machine's service manual for alignment, torque, and electrical connections.