Lfsx24623d Parts

The Shelf is an OEM replacement part for Frigidaire refrigerators. It provides flexible storage and organization for items inside the refrigerator. Shelves are essential for maximizing interior capacity and accommodating groceries of various heights and sizes.

Causes of a bad shelf can include wear and tear over time, damage from excessive weight, or accidental breakage. Handles might loosen or cracks could develop in the surface.

Symptoms of a bad shelf include:

• Sagging or uneven surfaces that cannot support stored items properly
• Shelf handles detaching from mounting holes 
• Cracks or breaks reducing the shelf's integrity

This shelf is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This refrigerator pan cover insert sits in the frame above a storage drawer to create a flat, sturdy shelf surface. Replace a cracked, missing, or loose insert to restore support and help drawers slide and seal properly. What it does:

• Fits into the pan cover frame to form a flat surface above the drawer
• Supports food items while covering the drawer below
• Helps contain spills and prevents items from falling into the drawer
• Common symptoms: cracked/broken insert, sagging shelf, spills leaking into drawer, drawer catching

• 1 pan cover insert

• Remove food, slide out the drawer, and lift out the cover/frame for access
• If working near lights or controls, disconnect power; wear cut-resistant gloves when handling edges
• Clean the frame channels and align the insert with orientation tabs/grooves
• Lower the insert gently and ensure it sits flush—do not force into place

This water inlet tube routes incoming water inside the refrigerator, restoring a secure, leak-resistant path for the ice/water system. Replacing a damaged tube helps prevent leaks and ensures proper filling where the system needs it. What it does:

• Carries water from the supply/valve to the internal fill point
• Replaces tubing that is cracked, kinked, brittle, or leaking
• Helps resolve water drips at the rear or around the fill area
• Clears the path so blockages don't reduce or stop filling/ice production

• 1 water inlet tube

• Disconnect power and shut off the water supply before servicing
• Pull the refrigerator forward carefully for rear access and protect the floor
• Match the original routing; transfer any model-specific clips or seals if present
• Restore water, purge air, and check all connections thoroughly for leaks

Access door provides a finished cover for the appliance's service opening, protecting internal components from dust and damage while keeping the unit looking tidy and allowing access for maintenance and repairs. What it does:

• Covers the service or access opening and protects wiring, valves, and other internal parts.
• Allows access to controls, connections, or components for inspection and repair without removing major panels.
• Helps prevent debris, pets, or fingers from contacting internal parts.
• Replace a missing, cracked, or damaged access door to restore appearance and reduce exposure of internal components.

• Always disconnect power (and gas for gas appliances) before removing panels or working on the appliance.
• Handle the door and surrounding edges carefully to avoid cuts; keep original fasteners and reuse if undamaged.
• Align tabs/clips and secure with manufacturer screws; do not overtighten.

This refrigerator kickplate grille mounts across the lower front of the cabinet to cover the machine compartment while allowing proper airflow. Replacing a broken or missing grille restores a clean finish and helps keep debris away from internal components.

• Covers the lower opening and helps shield the condenser area from bumps and debris
• Helps direct air through the base for proper ventilation
• Restores a clean, finished appearance across the bottom front
• Typical symptoms: cracked or scuffed grille, broken mounting tabs, loose or won't stay attached, missing

• Disconnect power and wear work gloves to avoid sharp edges
• Open doors; on many models, pull the grille straight out to release spring clips. If screws are used, remove them from the base rail
• Align tabs/clips and snap or fasten the grille into place
• The grille is secure and clear of door swing and air inlets

Color: Black

This shroud assembly covers and channels airflow around the evaporator to help protect internal components and promote even cooling. It restores proper airflow pathways after damage or during evaporator repairs. What it does:

• Protects evaporator and nearby components from debris and contact
• Directs airflow over the evaporator for consistent cooling performance
• Helps reduce localized frost buildup when used with a functioning defrost system
• Commonly replaced if cracked, broken mounting tabs, or interfering with the fan

• One shroud assembly as shown

• Disconnect power before servicing; work only with the appliance unplugged or breaker off
• Removal typically requires accessing the evaporator compartment and removing panels; keep fasteners organized
• Handle plastic parts carefully to avoid cracking mounting tabs during installation

The Lower Front Grille is an OEM part for Frigidaire refrigerators. It is an exterior cosmetic part located underneath the refrigerator doors. The lower front grille protects internal components while maintaining an attractive facade.

Causes of a bad lower front grille can include dents, cracks or deformations from accidental bumps or impacts over time. The securing clips or fasteners may become loose or damaged.

Symptoms of a bad lower front grille include:

• Missing grille sections allowing access to internal areas
• Loose or sagging grille not sitting flush with the refrigerator paneling
• Appearance or aesthetics of the refrigerator front compromised

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Dispenser Facade is an OEM part for Frigidaire refrigerators. It forms the decorative facing around the ice and water dispenser area located externally on the door. Besides providing an aesthetic covering, the facade also protects internal components from accidental damage.

Causes of a bad dispenser facade can include scratches, cracks or discoloration from normal opening and closing of the refrigerator door over many years of usage.

Symptoms of a bad dispenser facade include:

• Worn, faded or damaged external appearance
• Exposed internal dispenser parts that could be at risk for impact damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models. 

This evaporator cover mounting bracket secures the evaporator cover inside the freezer compartment to keep cooling airflow and components in place. Durable metal construction replaces a broken or bent bracket to restore proper cover alignment. What it does:

• Holds the evaporator cover in position for correct airflow and protection of the evaporator coil
• Helps stop rattling or loose cover movement that can cause noise
• Restores a secure mounting point after impact or corrosion damage
• Works with the evaporator cover assembly to maintain consistent cooling performance

• High-level replacement: remove the evaporator cover to access mounting points; fasten bracket with existing screws
• Use basic hand tools; keep screws and clips organized for reassembly
• Disconnect power to the appliance before starting any repair to avoid electrical hazard