Lfx25978 Parts

This replacement door basket mounts on the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, damaged, or missing.

• Attaches to the inner door rails to organize items on the door
• Keeps contents in place as the door opens and closes
• Replaces a cracked, broken, warped, or missing bin
• Symptoms include broken tabs, bin won't stay seated, or reduced door storage

• Remove items from the old bin; lift up to release it from the door rails
• Align the new basket's hooks with the door slots and lower until fully seated
• Confirm the bin is level and secure before loading
• No tools typically required; avoid overloading to prevent damage

This refrigerator door gasket forms a tight perimeter seal to keep cold air in and warm, humid air out. Replacing a damaged or warped seal helps maintain temperature, reduce frost and condensation, and support efficient operation.

• Seals the gap between the door and cabinet to prevent air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost and condensation buildup inside the compartment
• Common symptoms: visible tears or warping, gaps or loose corners, moisture around the door, excessive frost, or the door not closing/staying closed

• Disconnect power and clear items from the door before starting
• Allow the new gasket to warm to room temperature; use low, indirect heat (hair dryer) to relax folds—do not overheat
• Remove the old seal and clean the mating surface/retainer; install the new gasket starting at the corners and seat it fully and evenly
• After installation, perform a "dollar-bill" test around the perimeter and adjust seating/door alignment as needed; allow time for the gasket to set

This rail guide assembly replaces a worn or broken slide rail that supports smooth movement of a drawer or component. Restores proper alignment and helps the drawer glide quietly and evenly. What it does:

• Guides and supports the drawer or sliding component along its track.
• Replaces damaged or bent rail sections that cause sticking or uneven movement.
• Reduces scraping, grinding, or noisy operation from a faulty guide.
• Helps restore proper alignment to prevent binding or partial closure.

• One rail guide assembly.

• Disconnect power (and water if applicable) and follow appliance-specific disassembly steps before replacing the rail.
• Basic hand tools are typically required; avoid forcing components to prevent breakage.
• Keep fasteners and any removed parts organized for reassembly.

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore an airtight closure and help maintain proper cooling. It fits the door's perimeter and creates the seal between the cabinet and door. What it does:

• Seals the refrigerator door to retain cold air and improve temperature stability.
• Prevents warm air intrusion that can cause frost buildup or increased energy use.
• Helps reduce condensation and water leaks around the door area.
• Restores proper door alignment and closing when old gasket is torn, stretched, or deformed.

• Unplug the appliance and remove food from the door area before starting.
• Work with the door propped or supported; follow OEM removal steps for existing gasket tabs or clips.
• Gently warm and flex the new gasket if needed for easier seating; avoid sharp tools that can puncture it.
• After installation, check the seal around the full perimeter and allow a short run cycle to verify proper operation.

Note: Right Rail Cap 

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper internal temperature. It fits the specified LG door opening and restores the cabinet-to-door seal. What it does:

• Seals the door perimeter to prevent warm air intrusion and reduce frost build-up.
• Helps maintain consistent internal temperature for food safety and efficient cooling.
• Reduces condensation and moisture that can lead to odor or spoilage.
• Addresses common symptoms like visible tears, gaps, or poor door closure.

• High-level replacement: remove the old gasket, clean the door channel, and press the new gasket into the retainer groove following the OEM pattern.
• Inspect the door frame and retainer for damage before installing; a warped frame can prevent a proper seal.
• Use gentle heat only if needed to ease seating; avoid open flames or excessive heat.
• Disconnect power to the appliance or follow manufacturer safety instructions if removing doors or working near electrical components.

This hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. It helps stop sagging doors, noisy movement, and improper sealing for better cooling performance. What it does:

• Supports and pivots the refrigerator door for correct alignment and even sealing
• Replaces broken, bent, or worn hinge hardware that causes door sag or misalignment
• Reduces rubbing, grinding, or noisy hinge movement when opening or closing
• Helps restore proper door closure to prevent cold air loss and temperature issues

• Unplug the appliance and support the door before removing hinge hardware to prevent injury or damage
• Transfer any mounting screws or brackets only if specified by the OEM; replace visibly damaged fasteners
• Tighten mounting fasteners to secure the hinge but avoid over-torquing; confirm door alignment after installation

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components