Lfx28968s/00 Parts

This display cover assembly protects the control panel and display while keeping the appliance looking finished. It restores a clean, readable interface and shields buttons and indicators from spills and wear. What it does

• Replaces a cracked, scratched, or discolored display cover to improve appearance and readability
• Protects the underlying display and control electronics from dust and light contact damage
• Helps maintain button alignment and prevents debris from entering the control area
• Returns the front panel to a factory-finish look after accidental damage

• Disconnect the appliance from power before starting any repair to avoid shock or damage
• Minor disassembly of the control panel is typically required; keep screws and clips organized
• Inspect mounting tabs and clips for damage; replace any broken fasteners to ensure a secure fit

This evaporator assembly is the sealed evaporator coil and mounting used in compatible refrigerators to absorb heat and support the freezer cooling cycle. Replacing a damaged evaporator restores proper cold circulation and helps eliminate frost build-up in the evaporator area. What it does:

• Absorbs heat from inside the freezer compartment so the refrigerant can carry heat away
• Works with the evaporator fan and defrost system to maintain proper freezer temperatures
• A faulty or damaged evaporator can cause frost accumulation, reduced cooling, or long run-times
• Installed as part of the sealed refrigeration loop to enable normal compressor cycling

• One complete evaporator assembly

• Disconnect power before starting any repair; work in a dry, well-lit area
• This is part of the sealed refrigeration system; repairs that require cutting or brazing refrigerant lines should be performed by a qualified, certified appliance technician
• Inspect and replace any damaged gaskets, insulation, or fasteners during reassembly for best results
• Follow manufacturer service instructions for proper defrost and airflow alignment

This LED light cover protects and diffuses the appliance's interior LED, restoring even lighting and a finished appearance. It is a direct-fit replacement designed to match the original factory lens. What it does:

• Protects the LED assembly from debris and impacts
• Diffuses and softens LED output for even interior illumination
• Restores a cracked, yellowed, or missing lens that affects light distribution
• Helps prevent direct contact with the LED board

• One LED light cover

• Disconnect power or unplug the appliance before starting
• Handle the lens carefully to avoid scratches; it typically snaps into place or is retained by a few clips
• Use a small screwdriver only if necessary to release retaining clips; avoid forcing parts

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Door Gasket Assembly is an OEM part for LG refrigerators. This part creates a tight seal around the refrigerator door, preventing warm air from entering and cool air from escaping. 

Causes of a bad door gasket assembly can include regular wear and tear, damage from frequent door openings and closings, or exposure to temperature fluctuations that degrade the material. 

Symptoms of a bad door gasket assembly include:

• Visible cracks, tears, or deformities in the gasket
• The refrigerator door not closing properly
• Increased condensation or frost buildup inside the refrigerator
• Higher energy bills due to the refrigerator working harder to maintain temperature

This OEM LG part is also compatible with some Kenmore models.

The Roller Assembly is an OEM part for LG refrigerators. It comprises the set of rollers that suspends and aids the smooth gliding of refrigerator shelves. The rollers are designed with precision bearings to withstand the weight of shelf loads and years of use while providing quiet and frictionless movement. 

Causes of a bad roller assembly include worn-out or damaged rollers due to heavy usage over time, or shelf loads that are too excessive. 

Symptoms of a bad roller assembly are:

• Shelves that do not easily slide in and out 
• Grinding or squeaking noises emanating from the shelf tracks
• Shelves that get stuck or do not smoothly glide

This OEM LG part is also compatible with Sears/Kenmore. Replace yours today and restore like-new shelf functionality to your refrigerator.
 

Left side

This ice dispenser door assembly opens to release ice and seals the chute when not in use. Replacing a worn flap restores a tight seal to reduce frost buildup and air leaks at the dispenser.

• Seals the ice chute to keep warm air out and cold air in
• Opens during dispensing to allow cubed or crushed ice to pass
• Helps prevent frost/ice accumulation in the chute and around the dispenser
• Common signs of failure: flap won't open/close, visible gap or draft at the chute, frost forming in the dispenser area

• Always disconnect power before servicing the dispenser
• Remove dispenser trim/control panel as directed; disconnect wiring as needed
• Remove mounting screws/clips, swap the assembly in the same orientation, and reuse existing hardware if applicable
• Restore power and test for smooth operation and a proper seal

This lever cover is a molded trim/protective piece that fits over a user-operated lever on the appliance. Replacing a damaged or missing cover helps protect the mechanism and restores a clean, finished appearance. What it does:

• Shields and guides the lever mechanism to help ensure smooth operation
• Helps keep internal components covered and aligned
• Restores the finished look when the original cover is cracked or missing
• Common symptoms: cracked or broken cover, loose/wobbly lever feel, sticking or misaligned lever action

• Includes 1 lever cover

• Disconnect power before servicing; if working near a dispenser, shut off water supply as applicable
• Remove any screws or clips and release locking tabs carefully to avoid breaking adjacent plastics
• Transfer any reusable hardware from the original part
• Check lever movement and engagement before final reassembly

This rail guide assembly supports and guides a sliding drawer/rack along its track so it opens and closes smoothly. Replacing a worn or broken guide restores proper alignment and motion, helping prevent sticking, jamming, or uneven travel.

• Supports and stabilizes the drawer/rack on its slide rail
• Helps ensure smooth, straight opening and closing
• Can address issues like binding, noise, or misalignment
• Replaces cracked, warped, or broken guide components

• Disconnect power and, if applicable, shut off water before servicing
• Remove the drawer/rack and retain any reusable hardware
• Install the new guide in the same orientation as the original
• Test movement for smooth travel before fully reassembling

This rail guide assembly restores smooth, reliable drawer movement by guiding and supporting the slide rail. Replaces a worn or broken guide so freezer/refrigerator drawers open and close without sticking or falling off track. What it does

• Guides the drawer slide rail and keeps the drawer aligned during operation
• Helps stop drawers from binding, sticking, or coming off the rail
• Reduces scraping, grinding, or noisy sliding caused by damaged guides
• Restores proper drawer support so contents remain stable while opening and closing

• Disconnect power before working inside the appliance and remove food, drawers and shelves that block access.
• Remove the old guide and install the new guide using the original mounting screws; match the correct side/orientation before fastening.
• Use common hand tools; avoid forcing parts—if the rail is bent or damaged, replace the rail as well.

This tray assembly replaces the right-side Fresh Room tray in your refrigerator. It restores sturdy, level storage in the pantry/deli area so items stay organized and the drawer fits and slides as intended. What it does:

• Provides the support surface for the Fresh Room/pantry section
• Seats and aligns the matching drawer/cover for smooth operation
• Replaces cracked, warped, or missing tray to restore proper fit
• Common symptoms: broken tabs, tray won't stay in place, drawer misalignment, unstable or tipping items

• 1 right-side Fresh Room tray assembly

• Empty the compartment; lift and tilt out the damaged tray from its supports
• Inspect side guides/rails; ensure mounting points are intact before installing
• Align the new tray with the right-side guides and slide/press fully into place
• Handle carefully to avoid stressing plastic; wear gloves for protection

This refrigerator shelf assembly restores a sturdy, level storage surface in the refrigerator compartment. Replace a cracked, bowed, or missing shelf to keep food organized and safely supported.

• Provides a stable surface for containers and food in the refrigerator section
• Replaces a damaged, warped, or missing shelf assembly
• Helps prevent spills and tipping by restoring proper support
• Common symptoms: cracked/shattered shelf, broken frame tabs, shelf won't sit level or stay in place

• Disconnect power before servicing
• Remove items and lift out the old shelf carefully; retain any reusable parts specific to your model
• Wear cut-resistant gloves and handle the new shelf with care
• Ensure the shelf is fully seated in the side rails/tabs and level before loading

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter