Lfx28968st /04 Parts

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This DC motor powers the washer's drum rotation, restoring normal spin and agitation so loads wash and rinse effectively. Designed to replace a worn or failed drive motor for reliable drum movement and consistent cycle performance. What it does:

• Spins the drum and controls agitation for wash and rinse cycles
• Restores normal spinning when the washer won't agitate or spin
• Helps reduce noisy, uneven, or intermittent drum rotation when the motor is the cause
• Works with the washer's electronic controls to regulate motor speed and direction

• One DC drive motor

• Disconnect power before starting and follow the washer manufacturer's service manual
• Basic disassembly of the cabinet and drum support is typically required; keep fasteners organized
• Verify wiring connectors and mounting orientation match the removed motor before final assembly
• Check control board and wiring for faults

This is the main control board that manages power and operational commands for the appliance, restoring normal control when the original board fails. Replaces a faulty main board to help the appliance respond correctly to user inputs. What it does

• Controls power distribution and coordinates signals between user interface, sensors, and motors.
• Can cause no power to the unit or unresponsive controls when failed.
• Works as the central logic board that executes cycles and safety interlocks.

• One main control board assembly.

• Disconnect all power to the appliance before starting any repair to avoid shock or damage.
• Handle the board by its edges and avoid static discharge; use an ESD strap if available.
• Verify connector orientation and secure all wiring harnesses; do not force connectors.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore an airtight seal and maintain proper cooling. A properly seated gasket reduces drafts, moisture intrusion, and energy loss. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps prevent frost buildup and moisture accumulation inside the compartment.
• Reduces compressor run time and energy usage caused by a leaking seal.
• Addresses symptoms such as warm spots, visible gaps around the door, or condensation on the door edges.

• Disconnect power to the appliance and remove food from the door area before starting.
• Inspect the door flange for damage and clean the mounting surface to ensure a proper seal.
• Seat the gasket fully into the channel; some models require loosening or removing trim screws to install.
• If the door does not close evenly after installation, check hinge alignment and adjust per the OEM instructions.

This refrigerator shelf assembly replaces a broken or worn shelf to restore a flat, stable storage surface for food and containers. It fits into standard shelf supports and helps keep items organized and visible. What it does:

• Provides a stable, flat surface for storing food, beverages, and containers
• Replaces cracked, chipped, or sagging shelves that no longer support items safely
• Restores proper spacing and organization inside the refrigerator
• Helps prevent spills by returning a level storage surface

• Remove food and loose items from the area before replacing the shelf.
• Slide the shelf into the existing tracks or supports until it seats securely.
• If glass, handle carefully and wear gloves to avoid cuts; inspect mounting supports for damage.
• If the shelf does not seat properly, do not force it—check for obstructions or damaged brackets.

This replacement lever button is the user-operated push control that lets you engage the appliance's latch or control function. It restores a worn, cracked, or non-springing button so controls respond reliably. What it does

• Acts as the external push/lever used to latch, unlatch, or activate a control mechanism
• Replaces cracked, loose, or unresponsive buttons that no longer engage properly
• Helps restore normal tactile response and alignment of the control assembly
• Works with the existing actuator and mounting points — no modification required

• One replacement lever button

• High-level replacement only; remove power source before starting repair
• Handle panels and clips gently to avoid damage to trim or surrounding controls
• Verify correct button orientation before final reassembly

This lamp cover assembly protects and diffuses the interior light so the appliance illuminates evenly while shielding the bulb from spills and impact. It restores a finished look and helps keep the light working safely. What it does:

• Shields the interior light bulb from food, moisture, and accidental contact
• Diffuses light for more even illumination inside the compartment
• Prevents direct bulb exposure that can cause glare or damage
• Replaces cracked, yellowed, or missing lens that reduces light output

• Disconnect power to the appliance before servicing to avoid shock
• Handle the lens carefully to avoid scratches or cracking during install
• Typically secures with simple clips or screws; have a screwdriver handy
• Avoid touching the bulb with bare hands

This duct assembly routes airflow inside the appliance to maintain proper venting between components. Replacing a damaged or clogged duct restores correct airflow for efficient operation and reduces noise. What it does:

• Channels air between internal components to support heating, cooling, or drying cycles
• Helps prevent backflow and misdirected airflow that can reduce performance
• Commonly replaced when airflow is restricted, the appliance runs louder than normal, or moisture/ice buildup occurs
• Fits where a single adjustable/multi-connection duct is required for OEM-style airflow routing

• One duct assembly

• Power off and unplug the appliance before servicing to avoid shock or injury
• Remove panels as needed to access the duct; follow OEM disassembly order to prevent damage
• Inspect adjacent seals and mounting clips; replace any damaged fasteners for a proper fit