Lfx29945st/00 Serial Parts

Note: Right Rail Cap 

This replacement lever button restores a tactile control on the appliance's front control panel so you can reliably select functions and settings. It replaces a worn, cracked, or non-responsive lever used to press a control switch. What it does

• Replaces a damaged or worn control lever that prevents reliable button actuation
• Restores a solid tactile feel when selecting cycle options or settings
• Helps stop a lever that is stuck, loose, or broken from sticking or failing to engage the switch
• Works with the existing control bezel and switch assembly to provide normal user input

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Access may require removing the control panel or bezel; keep track of screws and fasteners
• Remove the old lever by gently prying or unfastening retaining clips; press the new lever onto the switch shaft until it seats

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This decor cap is a small exterior trim piece that restores the finished look of the refrigerator door and covers fasteners or exposed edges. It helps maintain the appliance's appearance and protects underlying hardware from dust. What it does:

• Covers and protects exposed screws or trim edges on the refrigerator door
• Restores a clean, finished appearance to damaged or missing trim areas
• Helps prevent dirt and moisture from contacting underlying hardware
• Commonly used when replacing door trim or after hinge/fastener service

• One decor cap

• High-level replacement only; typically snaps or slides into place over the trim area
• Power off and empty nearby shelves if removing heavy items to access the cap safely
• Use non-marring tools to pry gently if needed to avoid scratching surrounding surfaces
• Keep hardware organized and hand-tighten to avoid overtightening

This door stopper cushions and limits a fridge/freezer or appliance door to prevent hard closing and reduce wear on the hinge. It restores quiet, controlled door movement and helps maintain proper alignment. What it does:

• Acts as a bumper between the door and cabinet to soften closing impact
• Keeps the door from contacting the cabinet or adjacent surfaces
• Reduces stress on the hinge and surrounding trim
• Helps prevent rattling or slamming during normal use

• One door stopper

• Disconnect power to the appliance before beginning work and follow all safety precautions
• Access may require opening or removing the door or hinge cover—support the door to avoid injury
• Typically secures with a snap-fit or small fastener; use basic hand tools and avoid over-tightening

This replacement customized screw restores secure fastening for LG appliance panels and components. It provides a precise fit where the original screw was lost or damaged so parts stay properly aligned and rattle-free. What it does:

• Fastens panels, trim, brackets or small components to maintain proper alignment and fit
• Replaces missing or damaged screws that cause loose parts or vibration noise
• Helps prevent movement that can lead to wear or intermittent contact
• Matches the original mounting point so installation restores OEM fit

• Disconnect power and unplug the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; do not overtighten
• Keep removed hardware organized and compare to the new screw before final assembly

This is a replacement mounting screw used to secure appliance panels, trim or components. It restores proper attachment to reduce vibration and rattling and helps keep removable parts firmly in place during operation. What it does:

• Fastens panels, brackets or trim pieces to the appliance frame
• Restores secure fit when original screw is missing, loose, or stripped
• Reduces rattling and vibration caused by loose hardware
• Helps maintain proper alignment of removable covers and control panels

• Disconnect power and water before starting any repair
• Verify size and thread match the original screw before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten — overtightening can strip threads or crack plastic parts
• Keep small parts away from children and pets

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This duct assembly channels exhaust air from the appliance to the external vent, helping maintain proper airflow and reduce moisture buildup. Replace a damaged or misaligned duct to restore safe, efficient venting. What it does:

• Directs exhaust air from the appliance to the vent outlet to support proper airflow
• Helps reduce backflow, moisture buildup, and lint bypass when properly sealed
• Fits multiple positions/configurations to accommodate different cabinet or wall locations
• Restores worn, torn, or crushed ducts that can restrict airflow or cause odors

• Disconnect power and unplug the appliance before beginning work; if gas-equipped, turn off the gas supply.
• Use appropriate clamps or screws and high-temperature foil tape where recommended.
• Inspect surrounding venting and replace any crushed or obstructed sections for best performance.

This LED assembly replaces a failed interior lighting module to restore bright, energy-efficient illumination. Designed to match the original fit and light output for a seamless replacement. What it does:

• Provides interior cabinet lighting so you can clearly see contents.
• Replaces dim, flickering, or non-working LEDs commonly caused by failed diodes or connectors.
• Restores consistent, cool-running illumination without changing appliance cooling performance.
• Matches OEM mounting points and electrical connector style for a direct-swap replacement when compatible.

• One LED assembly.

• Disconnect power to the appliance before starting any service to avoid shock.
• Remove existing light cover and mounting fasteners; transfer or replace connector per OEM instructions.
• Handle the LED module by its housing; avoid contact with LED surfaces and circuit traces.

This display power control board assembly powers and controls the appliance's front display and user interface, restoring visual indicators and button response for normal operation. It replaces a failed or unresponsive display/control module. What it does

• Supplies power to the front display and touch/buttons so the control panel lights and indicators operate
• Interprets user input from the control panel and sends signals to the main control system
• Can resolve symptoms such as a dark or flickering display, unresponsive buttons, or missing LEDs
• Helps re-establish normal display of cycle/status information when the original board is faulty

• One display power control board assembly

• Disconnect power to the appliance before starting any repair to prevent shock or damage
• Access may require removing the control panel; keep screws and trim organized for reassembly
• Handle the board by the edges and avoid touching components or connector pins