Lfx29945st/00 Serial Parts

This is a refrigerator drawer guide assembly that supports and guides a crisper/vegetable bin so it slides smoothly in and out. Replacing a worn guide restores proper drawer alignment and easy operation.

• Provides the track surface for the vegetable/crisper drawer
• Helps correct sticking, binding, or a sagging/misaligned drawer
• Can reduce scraping noises and uneven drawer movement
• Restores smooth sliding action after wear or damage

• Unplug the refrigerator before service
• Remove the affected drawer and any shelf above it for access
• Retain and transfer any screws or clips from the original guide
• Test drawer movement and alignment before closing up

This tray cover assembly is the shelf cover that sits above a storage bin inside your refrigerator. It restores a flat, stable surface for food and proper support for the drawer area when the original is cracked, warped, or missing. What it does:

• Forms the shelf surface over a drawer/crisper and supports stored items
• Provides structure for the drawer area so bins slide and seat correctly
• Helps maintain proper airflow across the drawer compartment
• Common signs of failure: cracked or sagging frame, broken tabs, drawers binding or not closing smoothly

• 1 tray cover assembly

• Unplug the refrigerator and clear the shelf area before starting
• Remove the affected drawer(s) and any inserts from the old cover
• Position the new cover on the cabinet supports and ensure tabs/rails are fully seated
• Reinstall drawers and check for level, smooth operation

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This shelf assembly replaces a cracked, chipped, or sagging glass shelf to restore stable storage and organization inside the refrigerator. It provides a solid, easy-to-clean surface for food and containers. What it does:

• Supports refrigerated food, containers and produce to maximize usable shelf space
• Restores a level, stable surface when an existing shelf is damaged or warped
• Helps prevent spills by providing a full, even glass surface
• Matches OEM fit and sits into existing shelf supports to maintain original layout

• Remove all items from the shelf and surrounding area before installation
• Slide the old shelf out of its supports and carefully lift the replacement into place; support glass to avoid dropping
• Use caution handling glass; wear gloves to prevent cuts
• If shelf does not seat easily, check support rails for obstructions or damage;

This Vegetable Tray Assembly replaces a damaged or cracked crisper drawer tray to restore a stable storage surface for fruits and vegetables. Keeps produce supported and helps maintain proper air flow inside the refrigerator. What it does:

• Replaces a broken, cracked, or warped crisper tray so drawers slide and store produce correctly
• Provides a flat, stable surface to prevent items from tipping or getting stuck
• Works with the refrigerator's crisper drawer to help keep humidity-controlled storage functioning normally
• Helps eliminate rattling or uneven drawer movement caused by a damaged tray

• One vegetable (crisper) tray assembly

• Designed for drop-in replacement; remove contents and pull out crisper drawer to access tray
• Inspect surrounding rails and mounting tabs for damage before installing replacement
• Handle carefully—plastic edges can be sharp and may crack if forced
• Unplug appliance or disconnect power before working near electrical components

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This filter cover replaces the damaged or worn cover that holds the air filter in place, helping maintain correct filter position and airflow for proper operation. It's a direct-fit replacement designed for easy swap-out. What it does

• Secures and protects the air filter inside the unit so the filter seals and sits correctly.
• Maintains proper airflow path to help the system run as designed.
• Prevents debris from bypassing the filter and entering internal components.
• Helps reduce rattling or vibration caused by a loose or broken cover.
• Restores the intended fit and finish of the filter compartment.

• One filter cover

• Disconnect power or remove batteries before removing the old cover to avoid fan or electrical hazards.
• Remove the old cover by releasing clips or screws; align replacement and engage clips or reinstall screws securely.
• Do not force the cover—ensure filter is seated correctly before closing to avoid damage.
• Replace hardware with OEM-equivalent parts for proper fit.

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This ice maker drive gear replaces the small plastic gear that turns the ice tray and advances the ice maker. Restores reliable rotation so the ice maker can harvest and eject ice properly. What it does

• Drives the ice tray/arm assembly so the ice maker can cycle and eject ice.
• Replaces worn or broken gear teeth that cause slipping or grinding.
• Helps stop intermittent or complete failure of the ice maker to produce ice.
• Useful when the ice tray spins slowly, stalls, or makes unusual noises.

• Disconnect power to the appliance before beginning any repair.
• Inspect surrounding gears and the motor shaft for damage; replace additional parts if worn.
• Handle small plastic parts carefully to avoid damaging gear teeth during installation.
• Follow the refrigerator service manual for proper removal and reassembly procedures.