Lfx31925st/ Parts

Restore a sturdy, easy-sliding produce bin with this replacement vegetable crisper drawer. It keeps fruits and vegetables organized and, when used with the matching cover, helps support proper humidity conditions in the refrigerator. What it does:

• Provides a dedicated bin for storing fresh produce under the crisper shelf
• Slides on the factory rails for smooth opening and closing
• Works with the crisper cover/humidity control to help manage moisture
• Common failure symptoms: cracked or broken bin, damaged corners/tabs, drawer sticks, falls off track, or won't stay seated

• 1 vegetable crisper drawer (tray assembly)

• Unplug the refrigerator before servicing
• Remove contents, then slide the old drawer straight out; remove the shelf above if needed
• Transfer any reusable inserts from the old bin if applicable
• Align the new drawer on the rails and slide it in fully; verify smooth operation

This Vegetable Tray Assembly is the refrigerator's crisper drawer for the fresh food section. Replace a cracked or missing bin so produce stores neatly and the drawer slides properly in its tracks.

• Provides a dedicated bin for fruits and vegetables in the fresh food compartment
• Slides on the crisper tracks beneath the shelf/cover for easy access
• Restores proper fit and smooth operation of the drawer
• Common reasons to replace: cracked or broken bin, broken tabs/lip, drawer won't slide correctly, or a missing drawer

• Remove contents, pull the old drawer out to the stop, then lift the front and pull free from the rails
• Align the new drawer with the tracks and slide it fully into place
• No tools typically required; handle plastic carefully and do not force parts

A replacement TV cover assembly that restores the exterior cabinet and helps protect internal components from dust and damage. Fits behind the front bezel to keep your TV enclosure secure and looking complete. What it does:

• Replaces a cracked, warped, or missing outer cabinet panel to improve appearance and protection
• Shields internal electronics and wiring from dust, debris, and accidental contact
• Helps maintain proper airflow pathways by restoring the factory enclosure shape
• Reduces rattles or unusual noises caused by a loose or damaged outer panel

• Disconnect power and remove the TV from its stand or wall before beginning repair
• Handle the cover carefully to avoid scratching; use a soft surface and non-marring tools
• Retain all original screws and mounting clips; compare new part to the old part for alignment before fastening

This damper controls airflow between compartments to help maintain proper temperatures and consistent cooling. It replaces a worn or broken damper to restore normal airflow and temperature balance inside the appliance. What it does:

• Regulates air flow between compartments so the refrigerator can maintain set temperatures
• Helps reduce uneven cooling and temperature swings caused by a stuck or broken damper
• Works as part of the appliance's air distribution system to route cooled air where needed
• Common symptom: compartment temperature too warm or inconsistent airflow noise from the damper area

• One damper assembly

• High-level replacement; access usually requires removing interior panels or duct covers
• Disconnect power before any repair to avoid shock or injury
• Handle with care to avoid bending or damaging mounting tabs and linkage

This drain tray assembly collects and directs moisture and condensate to the drain system, helping prevent leaks and pooling under the appliance. Designed to fit the appliance's drain path and restore proper drainage. What it does:

• Captures condensate and channel water toward the drain to reduce standing moisture.
• Helps prevent water from pooling under components that could cause corrosion or odors.
• Restores proper drain routing after a damaged or cracked tray is removed.
• Works with existing hoses and clips to maintain normal drainage performance.

• Disconnect power and water before beginning repair.
• Remove access panels or components as needed to reach the drain tray; keep fasteners organized.
• Inspect surrounding seals, hoses, and clips and replace any worn parts to ensure a watertight fit.
• Reassemble panels and test the appliance for proper drainage and leaks before returning to service.

This center hinge assembly replaces the factory center hinge that supports and aligns the refrigerator doors, restoring proper door movement and a tight seal for efficient cooling. It's a direct-fit mechanical hinge used where the upper and lower doors meet. What it does:

• Supports the weight of the upper/lower doors and maintains proper door alignment
• Lets the door pivot smoothly to open and close without binding
• Helps the door seal correctly to prevent warm air leaks and frost buildup
• Stops sagging or uneven door gaps that cause rubbing or poor closure

• One center hinge assembly

• Disconnect power to the appliance before starting work; if the unit has a water line, shut off the water supply as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use basic hand tools; follow the manufacturer service instructions for torque and fastener sequence

This is a replacement filter cover that secures and protects the air filter on compatible LG air-care units. It restores proper filter fit and helps maintain airflow and filtration performance for safer, cleaner operation. What it does:

• Holds the air filter in place and protects it from damage and debris
• Helps maintain correct airflow through the filter assembly
• Prevents gaps that can allow unfiltered air to bypass the filter
• Addresses symptoms such as a cracked, loose, warped, or missing filter cover

• One filter cover (housing) as shown

• Disconnect and unplug the appliance before servicing
• Remove the filter and detach the old cover (typically snaps or screws) before installing the replacement
• Align tabs and secure the cover until it seats firmly; do not force or bend mounting tabs
• If screws are used, tighten evenly to avoid distorting the cover; test fitment before powering on

This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.

• Stores ice and interfaces with the dispenser system to deliver cubes or crushed ice
• Resolves no or weak ice dispensing
• Corrects grinding/clicking noises or auger jamming from a damaged bin
• Addresses visible cracks, broken tabs, or a bucket that won't seat securely

• Disconnect power to the refrigerator before servicing
• Open the door and pull the old bucket straight out; depress any release tab if equipped
• Align and seat the new assembly fully so the drive coupling engages—do not force it
• Restore power and test the dispenser (cube and crush selections)

The Clip is an OEM part for LG refrigerators. This clip secures the water tube in place, preventing it from moving or becoming disconnected. It plays a crucial role in maintaining the proper flow of water to the ice maker and water dispenser.

Causes of a bad water tube clip can include physical damage, wear and tear from regular use, or brittleness due to temperature fluctuations. If the clip fails, it can result in leaks or disconnections, disrupting the water supply.

Symptoms of a bad water tube clip include:

• Water leaks inside or outside the refrigerator
• The water tube becoming loose or disconnected
• Reduced or no water flow to the ice maker or water dispenser

This OEM LG part is also compatible with Sears/Kenmore refrigerators.