Lfxc22526s /00 Parts

This DC motor powers the washer's drum rotation, restoring normal spin and agitation so loads wash and rinse effectively. Designed to replace a worn or failed drive motor for reliable drum movement and consistent cycle performance. What it does:

• Spins the drum and controls agitation for wash and rinse cycles
• Restores normal spinning when the washer won't agitate or spin
• Helps reduce noisy, uneven, or intermittent drum rotation when the motor is the cause
• Works with the washer's electronic controls to regulate motor speed and direction

• One DC drive motor

• Disconnect power before starting and follow the washer manufacturer's service manual
• Basic disassembly of the cabinet and drum support is typically required; keep fasteners organized
• Verify wiring connectors and mounting orientation match the removed motor before final assembly
• Check control board and wiring for faults

This is a replacement filter cover that secures the air filter in place and protects internal components. It restores the proper fitment of the filter and helps maintain intended airflow and filtration performance. What it does:

• Holds the air filter securely so air passes through the filter media as designed
• Protects internal components from dust and debris
• Prevents gaps that can reduce filtration efficiency or allow unfiltered air bypass
• Helps reduce rattling or vibration caused by a loose or damaged cover

• One filter cover

• Disconnect power before accessing internal parts
• Remove the old cover by releasing retaining tabs or fasteners and align new cover until it snaps or locks into place
• Inspect nearby seals and the filter; replace if damaged
• Handle plastic parts gently to avoid cracking; do not force into place

This hinge cover assembly replaces a worn or damaged lid hinge cover to restore a smooth, finished look and protect the hinge area from debris and pinching. It helps keep the hinge area sealed and reduces snagging on the lid edge. What it does:

• Covers and protects the lid hinge and pivot area from dirt and moisture
• Restores a clean appearance where a cracked or missing hinge cover was visible
• Helps prevent clothing or hands from catching on the exposed hinge
• Can reduce rubbing noise caused by contact with a damaged cover

• Basic removal of the lid or access panel may be required; follow for proper disassembly
• Use appropriate hand tools and keep small fasteners secure during reassembly
• Disconnect power (and water for washers) before starting work to avoid injury

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore an airtight seal and maintain proper cooling. A properly seated gasket reduces drafts, moisture intrusion, and energy loss. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps prevent frost buildup and moisture accumulation inside the compartment.
• Reduces compressor run time and energy usage caused by a leaking seal.
• Addresses symptoms such as warm spots, visible gaps around the door, or condensation on the door edges.

• Disconnect power to the appliance and remove food from the door area before starting.
• Inspect the door flange for damage and clean the mounting surface to ensure a proper seal.
• Seat the gasket fully into the channel; some models require loosening or removing trim screws to install.
• If the door does not close evenly after installation, check hinge alignment and adjust per the OEM instructions.

This tray assembly is the replacement drawer pan that supports and contains items inside the refrigerator drawer, restoring proper storage and a secure sliding surface for the drawer. It helps keep foods contained and prevents sagging or cracking. What it does

• Replaces a cracked, warped, or missing drawer tray to restore a stable surface for stored items
• Supports the refrigerator drawer so it opens and closes smoothly and stays aligned
• Helps contain spills and prevents food from falling onto lower compartments
• Fits into the existing drawer frame and works with original slides and seals

• Disconnect power to the appliance before starting any repairs
• Remove the drawer and slides per the refrigerator's service instructions before swapping the tray
• Handle plastic components carefully to avoid cracking; use gentle pressure when seating the new tray

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure

This is an ice storage bucket that collects and holds cubed ice from the refrigerator ice maker, making it easy to dispense and store ice for daily use. It replaces a cracked, warped, or missing ice bin to restore proper ice handling. What it does:

• Collects and stores ice produced by the ice maker so cubes are ready to dispense
• Guides ice to the dispenser/door chute or manual access area to prevent spills
• Prevents ice jamming caused by broken or deformed bins
• Helps keep ice contained and sanitary inside the freezer compartment

• Disconnect power before servicing the ice maker area to avoid injury
• Remove any remaining ice before removing the old bucket to reduce spills
• Align bucket tabs/guides and slide into place until it seats naturally; do not force
• If ice does not dispense after install, check ice maker alignment and clear ice chute

This Tray Cover Assembly replaces a damaged or missing tray cover to restore a finished appearance and proper protection for the underlying tray area. Designed to fit and align with the original mounting points for a secure fit. What it does:

• Covers and protects the appliance tray from spills, debris, and everyday wear
• Helps maintain correct spacing and alignment of tray components
• Restores the original look where the tray cover is cracked, warped, or broken
• Stops light drafts or minor leaks by resealing the tray perimeter (when part is intact)

• One tray cover assembly

• Install with appliance powered off and water/ice supply turned off if working near dispenser or ice components
• Align tabs and mounting points, then press or fasten according to original hardware—do not force parts into place
• Inspect surrounding clips and screws; replace damaged fasteners to ensure a secure fit

This main PCB power control board assembly manages the appliance's electronic controls and power distribution so the unit responds correctly to user commands. Replacing a faulty board restores control panel operation and key functions. What it does:

• Regulates power and communication between the control panel and internal components
• Handles user input signals and runs control sequences for normal operation
• Can correct symptoms like unresponsive controls, failure to start, or intermittent operation when the board is faulty
• Works as the central control module for timed cycles and safety interlocks

• One main PCB power control board assembly

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Handle the PCB by its edges and avoid touching components to prevent ESD damage
• Verify connector orientation and seating; ensure all ribbon cables and harnesses are fully engaged

This cover tray is the molded plastic top/cover that protects and contains the unit's internal tray area, helping keep components clean and guiding condensate or collected material into the tray. Replaces cracked, warped or missing tray covers to restore proper containment and appearance. What it does

• Covers and protects the appliance's internal tray area to prevent debris from entering internal components.
• Guides liquid or collected material into the tray for proper containment.
• Helps maintain correct fit and alignment of adjacent panels and parts.
• Common symptom: visible cracks, warping, loose fit or missing cover causing spills or debris entry.

• Disconnect power and remove any water or debris from the tray area before replacing the cover.
• Inspect surrounding tabs and mounting points for damage; replace any broken fasteners for a secure fit.
• Handle the plastic cover carefully to avoid cracking; hand-tighten any screws to avoid stripping.

This replacement drip tray catches and channels water beneath the appliance to prevent leaks and pooling. It helps maintain proper drainage and reduces the chance of water damage under your refrigerator or freezer. What it does:

• Collects condensation, defrost water, or minor leaks to keep the cabinet floor dry
• Directs water to the evaporator or drain system so it can safely evaporate
• Helps prevent pooling that can lead to odors or mildew
• Restores a damaged or missing tray to stop water from dripping onto the floor

• For safety, unplug the appliance and shut off water supply (if applicable) before installing
• Slide or snap the tray into the designated location; ensure it seats fully and aligns with the drain path
• Inspect surrounding seals and drain channels for blockages or damage while the tray is accessible