Lfxs24623 Parts

This tray assembly forms the Fresh Room shelf inside the refrigerator compartment, supporting the deli/cheese drawer below. Replacing a cracked or missing tray restores smooth drawer operation and stable, usable storage space in the fresh food section.

• Supports and levels the Fresh Room/deli drawer
• Provides a flat shelf surface above the compartment
• Ensures proper drawer glide and closure when seated correctly
• Common signs of failure: cracked or broken tray, damaged tabs, sagging shelf, drawer binding or misalignment

• Unplug the refrigerator and remove food items and the Fresh Room drawer before servicing
• Lift the front and slide the old tray assembly out of its supports; do not pry against the liner
• Align the new tray on the rear tabs/side rails and press down until fully seated and level; handle edges carefully and use gloves

This cover assembly replaces the rear cabinet panel of the TV to protect internal components and restore a finished appearance. It helps eliminate exposed circuitry and prevents debris from entering the chassis. What it does:

• Replaces a cracked, warped, or broken rear cabinet to restore structural protection
• Covers and secures the TV's internal boards and wiring to reduce risk of damage
• Stops rattling or buzzing caused by loose or damaged rear panels
• Improves appearance by replacing a scratched or discolored back housing

• Disconnect the TV from power and any input sources before beginning work
• Remove any stand or wall-mount hardware and keep fasteners organized for reassembly
• Handle the cover and TV internals carefully to avoid damaging components or connectors

This door foam assembly is the insulated foam insert used inside the refrigerator door to help maintain cool temperatures and reduce energy loss. Replacing damaged or deteriorated foam improves sealing and helps the cabinet hold temperature more consistently. What it does:

• Provides thermal insulation inside the refrigerator door to reduce heat transfer
• Helps maintain internal temperature and supports efficient cooling
• Reduces drafts and cold-air leakage when door seals are intact
• Can help reduce frosting or uneven temperatures caused by degraded door insulation

• Access requires removing the inner door panel—handle and control panels may need removal first.
• Follow manufacturer instructions for panel removal to avoid damaging clips or wiring.
• Wear gloves to protect your hands from sharp edges and insulation particles.
• If door gasket or inner liner is damaged, inspect and replace those parts as needed for proper sealing.

This guide assembly secures and aligns internal TV components to keep the display and front panel stable during use. Replacing a damaged guide restores proper fit and reduces movement or rubbing that can affect the screen or bezel. What it does:

• Positions and supports the TV panel and adjacent internal parts for correct alignment
• Prevents panel flex, rubbing, and audible rattles caused by loose or broken guides
• Helps maintain an even bezel-to-screen gap and proper front-panel fit
• Restores mechanical stability after impacts or wear that crack or deform the original guide

• One guide assembly part as shown

• Disconnect power and fully remove the TV from its mount before starting
• Partial disassembly of the cabinet and removal of the front bezel/panel is typically required
• Handle the LCD/OLED panel carefully to avoid pressure marks or damage during installation
• Use the OEM fasteners and follow service manual orientation; test fit before final reassembly

This hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. It helps stop sagging doors, noisy movement, and improper sealing for better cooling performance. What it does:

• Supports and pivots the refrigerator door for correct alignment and even sealing
• Replaces broken, bent, or worn hinge hardware that causes door sag or misalignment
• Reduces rubbing, grinding, or noisy hinge movement when opening or closing
• Helps restore proper door closure to prevent cold air loss and temperature issues

• Unplug the appliance and support the door before removing hinge hardware to prevent injury or damage
• Transfer any mounting screws or brackets only if specified by the OEM; replace visibly damaged fasteners
• Tighten mounting fasteners to secure the hinge but avoid over-torquing; confirm door alignment after installation

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This cover assembly protects the appliance's printed circuit board from debris, moisture and accidental contact, helping preserve reliable control operation. It provides a secure enclosure that keeps the PCB mounted and shielded during normal use. What it does:

• Shields the control board from dust, moisture splash and foreign objects that can cause shorts or component damage.
• Keeps wiring and connectors routed and secured to reduce strain and intermittent connections.
• Helps maintain correct spacing and alignment of the PCB for reliable electrical contacts.
• Useful when the original plastic cover is cracked, warped, missing or allows board exposure.

• One cover assembly for PCB.

• Disconnect power to the appliance before beginning any service to avoid shock or damage.
• Handle the PCB and connectors carefully; avoid touching board components or bending traces.
• Align cover over the PCB and fasten with the original screws or clips; do not overtighten plastic fasteners.

This Hinge Cover Assembly protects and conceals the top hinge area, restoring a finished look and preventing debris from entering the hinge. Fits as a direct replacement for a worn, cracked, or missing hinge cover. What it does:

• Covers and protects the hinge mechanism from dirt, lint, and accidental contact
• Restores appearance by replacing cracked, faded, or broken hinge trim
• Helps maintain proper hinge alignment by keeping the hinge area clear
• Common symptom: visible crack, missing trim, or exposed hinge hardware

• One hinge cover assembly (single piece as shown)

• Basic hand tools may be required; follow manufacturer instructions for safe removal and reinstallation
• Disconnect power (and water if applicable) and ensure the appliance is stable before servicing
• Avoid forcing clips or fasteners; inspect mounting points and replace any damaged hardware