Lfxs26973s/10 Parts

The Handle Assembly is an OEM part for LG refrigerator freezer compartments. It includes the handle and mechanical components that operate the freezer drawer.

Causes of a bad handle assembly can include fatigue from repeated opening and closing motions, damage sustained from heavy loads, or exposure to harsh chemicals over years of use.   

Symptoms of a bad handle assembly include:

• Handles detaching from the drawer front  
• Difficulty smoothly opening and closing the freezer drawer
• Inability to fully open or close the drawer
• Excessive play, wobble, or loose motion in the handle

Replace yours today with this genuine OEM LG assembly to restore effortless operation. This replacement handle is compatible with Frigidaire, Samsung, Whirlpool, and some Kenmore models.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

This is the refrigerator's vegetable tray assembly—the clear crisper drawer that holds produce in the fresh food compartment. Replace a cracked or missing bin to restore organized storage and smooth, reliable drawer operation. What it does

• Provides dedicated storage for fruits and vegetables in the refrigerator
• Slides on the existing drawer rails for easy access
• Helps contain spills and keep items organized
• Replace if the bin is cracked, warped, won't stay on its track, sticks, or is missing

• 1 vegetable tray assembly

• Empty the drawer and remove any shelf above if needed for clearance
• Pull the old drawer out to the stop, lift the front slightly, and remove
• Align the new tray on the rails and slide it fully into place
• Handle plastic carefully; edges can be sharp—use gloves and avoid forcing the drawer

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This lever button is the push-style control used to activate a specific function on the appliance's control panel. It restores tactile control and makes it easy to trigger the associated feature without replacing the whole panel. What it does:

• Acts as the user-facing push lever that completes the button action on the control assembly
• Replaces a cracked, worn or unresponsive lever that won't depress or return properly
• Helps resolve intermittent or failed button activation when the switch and contacts are otherwise good
• Matches the OEM shape so the button aligns and engages cleanly with the underlying switch

• High-level swap: remove the front/control bezel to access and replace the lever; keep screws and clips organized
• Power safety: disconnect power (unplug or shut off breaker) before servicing control area
• Inspect underlying switch and mounting clips during replacement; do not force parts into place

This Rail Guide Assembly restores smooth opening and stable support for a refrigerator/freezer drawer or similar appliance drawer. It replaces a worn or damaged guide to reduce sticking, misalignment, or noisy operation. What it does:

• Guides and supports the drawer along its track so it opens and closes evenly
• Replaces cracked, bent, or worn guide components that cause sticking or derailment
• Reduces scraping or grinding noises from a misaligned drawer
• Helps maintain proper drawer alignment and weight distribution during use

• Rail Guide Assembly (single)

• Disconnect power and remove stored items before starting any repair
• Use basic hand tools; lift and align the drawer onto the new guide during reassembly
• Inspect mating tracks and rollers for damage; replace other worn components as needed

A PTC thermistor assembly that senses temperature and provides the control board with accurate temperature feedback to help regulate heating and cycling. Replacing a faulty thermistor restores reliable temperature monitoring for safe, consistent operation. What it does:

• Monitors temperature and sends a signal to the appliance control so heating and cycles can be adjusted.
• Helps prevent overheating by enabling proper control of the heating system.
• Common symptoms of a failing thermistor: incorrect or inconsistent temperatures, heating that won't start or won't stop, extended cycle times, or temperature-related error codes.
• Works as the OEM-designated temperature sensing/feedback component for compatible LG units.

• Disconnect power to the appliance before starting any repair.
• Handle the assembly carefully; avoid pulling on wires or connectors—replace in the same orientation.
• May require basic hand tools and access panels.

This rail guide assembly helps the appliance drawer or rack slide smoothly and stay aligned, restoring reliable movement and reducing scraping or sticking during use. What it does

• Guides the drawer/rack along its track for smooth in-and-out motion
• Keeps the drawer aligned to prevent binding or tipping
• Reduces noise from grinding or scraping when the drawer is moved
• Helps prevent uneven wear on the track and adjacent components

• One rail guide assembly

• Disconnect power and remove any contents from the drawer/rack before starting
• Installation typically requires removing the drawer and securing the guide with basic hand tools
• Inspect the mating track and fasteners; replace damaged hardware as needed

This Refrigerator Shelf Assembly replaces a damaged or missing shelf so you can store food and containers securely and keep the fridge organized. It restores usable shelf space and helps maintain proper airflow inside the cabinet. What it does:

• Provides a stable, flat surface for food storage and containers.
• Replaces cracked, chipped, or sagging shelves that can no longer support items.
• Helps restore proper shelf spacing to improve organization and airflow.
• Compatible with models that use this OEM shelf assembly.

• One refrigerator shelf assembly.

• Handle glass or plastic shelves carefully to avoid breakage; wear gloves if needed.
• Remove all contents and follow the refrigerator manufacturer's instructions for shelf removal and replacement.
• If the shelf uses clips or rails, verify clip orientation and seating before applying weight.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This TV cover assembly replaces the rear cabinet that protects the TV's internal components and restores the unit's exterior appearance. It provides a secure housing to keep circuitry and boards enclosed while improving fit and finish. What it does

• Replaces a cracked, warped or missing rear cabinet that leaves internal parts exposed
• Restores mounting points for internal components and connection access
• Reduces rattles and vibration caused by damaged or loose rear housing
• Helps maintain proper airflow path designed for the TV's internal layout

• One TV cover assembly (rear cabinet) as shown

• Disconnect power and any cables before starting; work on a flat, static-free surface
• Installation typically requires removing the stand and unscrewing rear fasteners; keep track of screws and brackets
• Handle with care to avoid scratching the finish or damaging clips; alignment may require gentle pressure to seat tabs

This tray assembly fits the refrigerator fresh room/deli compartment and provides a stable, removable surface for storing deli meats and produce. Restores proper storage function and helps contain spills for easier cleaning. What it does:

• Replaces a cracked, warped, or missing fresh room tray to restore a level storage surface
• Helps contain spills and drips inside the deli/fresh compartment for easier cleanup
• Supports deli meats, cheeses, and produce while allowing drawer movement
• Can prevent items from shifting or obstructing drawer operation when intact

• One tray assembly

• Unplug the refrigerator or turn off power at the breaker before servicing
• Remove any contents and the deli/fresh drawer per your model's instructions to access the tray
• Handle the tray carefully to avoid damage; reinstall by sliding into the original guides until seated
• If the tray does not seat smoothly, stop and compare alignment—do not force parts

This replacement door basket restores door storage space and keeps bottles, condiments and small containers organized on the refrigerator door. It provides a secure shelf where the original bin is cracked, warped or missing. What it does

• Replaces a damaged or missing refrigerator door bin so items sit securely on the door
• Restores lost storage capacity for bottles, condiments and small containers
• Fits into existing door mounting tracks or snap locations to lock items in place
• Commonly used when the original basket is cracked, broken at the mounts or no longer holds items

• Unplug the appliance or disconnect power before starting any repair
• Empty the door bin and remove any clips or screws holding the old basket
• Align the replacement bin with the door tracks or mounting tabs and press or secure into place until it clicks
• Do not overload the bin; avoid forcing or bending mounting tabs during install