Lfxs285660/02 Parts

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore an airtight seal and maintain proper cooling. A properly seated gasket reduces drafts, moisture intrusion, and energy loss. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps prevent frost buildup and moisture accumulation inside the compartment.
• Reduces compressor run time and energy usage caused by a leaking seal.
• Addresses symptoms such as warm spots, visible gaps around the door, or condensation on the door edges.

• Disconnect power to the appliance and remove food from the door area before starting.
• Inspect the door flange for damage and clean the mounting surface to ensure a proper seal.
• Seat the gasket fully into the channel; some models require loosening or removing trim screws to install.
• If the door does not close evenly after installation, check hinge alignment and adjust per the OEM instructions.

A replacement rail guide assembly that restores smooth, stable sliding for refrigerator/freezer drawers and shelves. Helps reduce sticking and misalignment so drawers open and close more reliably. What it does:

• Guides drawer or shelf movement along the rail for smooth sliding
• Helps keep drawers aligned and prevents binding or tipping
• Reduces noise and catching when opening or closing drawers
• Restores proper support for heavy or loaded drawers

• Disconnect power or unplug appliance before accessing drawers or internal components
• Remove affected drawer or shelf to access mounting points
• Inspect mounting clips and screws; reuse only undamaged hardware or replace as needed
• Test drawer operation after installation to ensure proper alignment and secure fit

This refrigerator door handle assembly replaces a broken, cracked or loose door pull to restore a secure grip and normal door use. Durable finish matches the original for a clean, factory look. What it does:

• Replaces damaged or worn door handle components so the door can be opened and closed easily
• Stops wobbling, loose fit, or missing grip that can make the door hard to operate
• Restores the original appearance after chips, cracks or impact damage
• Works with the factory mounting points for a secure fit when installed correctly

• Remove contents and secure the door before starting to avoid tipping or injury
• Use basic hand tools; keep fasteners and trim clips for reuse only if undamaged
• Follow manufacturer instructions for alignment and torque to avoid stressing the door

This center hinge assembly replaces the factory door pivot and restores proper door alignment and smooth opening. It supports the refrigerator door at the center hinge point to help stop sagging, binding, or uneven gaps. What it does:

• Replaces the center pivot point that supports and guides the door
• Restores correct door alignment and even sealing to help maintain cooling efficiency
• Reduces door sag, sticking, and noise caused by worn hinge parts
• Allows the door to open and close smoothly when operating normally

• Disconnect power to the appliance and remove food from affected door before starting.
• Support or remove the door to avoid injury or damage; the door can be heavy.
• Use appropriate hand tools and follow torque guidelines in the OEM instructions.

This LED assembly replaces a TV backlight module to restore even screen illumination and image brightness. It mounts behind the LCD panel and provides the LED sources that light the display. What it does:

• Replaces a damaged or failed TV backlight module
• Restores even screen brightness and reduces dark spots
• Helps resolve flickering, dim display, or no-picture issues related to the backlight
• Works as a direct-fit LED module for compatible LG LCD TVs

• One LED assembly

• Disconnect power and remove the TV from power source before beginning service
• Requires partial disassembly of the TV (front bezel and LCD panel removal); handle the panel and LEDs carefully
• Avoid touching LED surfaces and circuit traces; use ESD precautions and appropriate tools

This rail holder is the replacement mounting bracket that secures a drawer or rail assembly in place, restoring proper alignment and smooth movement. It provides a direct-fit replacement when the original bracket is damaged or worn. What it does:

• Secures the rail or slide assembly to keep drawers/rails aligned and tracking smoothly
• Prevents sagging, excessive play, or rail misalignment that can cause binding
• Restores stable support for components that rely on the rail attachment
• Useful when the original holder is cracked, broken, or missing fasteners

• Disconnect power or unplug the appliance before starting any repair
• Access may require removing trim panels or the drawer/rail assembly—keep track of fasteners
• Use appropriate hand tools; avoid forcing parts to prevent further damage

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure

This customized screw secures internal components and panels in compatible appliances, providing a reliable fastener that restores proper fit and function. Use it when factory screws are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or assemblies to maintain structural alignment and prevent rattles
• Replaces stripped, corroded or missing mounting screws that can cause loose parts or vibration
• Restores secure connections for controls and internal components to help appliances operate quietly
• Works where the OEM called for a non-standard or modified screw shape/length

• Use the correct screwdriver or bit to avoid stripping the head; avoid overtightening
• Turn power off and unplug the appliance before accessing internal components
• Compare replacement to the original screw for length, thread and head type before installation

This replacement door basket restores storage on the refrigerator door, keeping bottles and small items secure and organized. It matches the original fit and helps maintain usable shelf space in compatible LG refrigerators. What it does

• Replaces a cracked, broken, or missing door bin to restore door storage capacity.
• Supports bottles, condiments and other small food items for easy access.
• Prevents items from falling out when the door is opened or closed.
• Uses the refrigerator's original mounting points for a stable fit.

• Remove all contents and open the door fully before replacing the basket.
• Most installs are tool-free: lift out the old basket and snap the new one into the existing mounting slots.
• If mounting clips or rails are damaged, replace them before installing the new bin.
• Handle with care to avoid chipping plastic or cutting hands on sharp edges; disconnect power only if working near electrical components.

This button lever is the small control-panel actuator that transfers finger pressure to the underlying switch, restoring reliable button feel and control response. Replaces worn, cracked, or missing levers to make front-panel buttons usable again. What it does

• Acts as the actuator for a specific control-panel push button, transferring user press to the switch beneath.
• Restores button engagement when the original lever is cracked, broken, or has fallen off.
• Helps eliminate intermittent or non-responsive button presses caused by damaged actuators.
• Fits into the control-bezel and aligns the button with the switch for consistent operation.

• One button lever/actuator as shown.

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or accidental activation.
• Access typically requires removing the control-bezel or panel; handle clips and small fasteners carefully.
• Align the lever onto the switch plunger and secure the bezel; do not force plastic parts to avoid breakage.

This replacement home bar case is the inner door shelf that holds bottles and small items in the refrigerator door, restoring storage function and a finished interior look. It fits the refrigerator's dedicated home/bar compartment. What it does:

• Provides a secure shelf for bottles, cans, and small containers in the door's home/bar area
• Restores proper spacing and support so items sit level and stay in place
• Replaces cracked, broken, or missing door-shelf housings that cause items to fall or rattle
• Helps maintain the refrigerator's intended interior organization and appearance

• One home bar case (single inner door shelf housing)

• Remove food and items from the door before replacing; handle glass or plastic shelves carefully
• Usually installs with snap-in tabs or a small number of screws—do not force parts; align tabs before pressing
• If your door has wiring or lighting nearby, disconnect power to the refrigerator before working on the door

This replacement drip tray catches and channels water beneath the appliance to prevent leaks and pooling. It helps maintain proper drainage and reduces the chance of water damage under your refrigerator or freezer. What it does:

• Collects condensation, defrost water, or minor leaks to keep the cabinet floor dry
• Directs water to the evaporator or drain system so it can safely evaporate
• Helps prevent pooling that can lead to odors or mildew
• Restores a damaged or missing tray to stop water from dripping onto the floor

• For safety, unplug the appliance and shut off water supply (if applicable) before installing
• Slide or snap the tray into the designated location; ensure it seats fully and aligns with the drain path
• Inspect surrounding seals and drain channels for blockages or damage while the tray is accessible