Lfxs28968s Parts

This overload protector is a compressor safety device that helps stop the compressor if it draws too much current or overheats, preventing damage and helping the refrigerator system run safely. What it does:

• Interrupts compressor power during excessive current draw or overheating to protect the compressor motor
• Can prevent short cycling and repeated restart attempts that damage the compressor
• Commonly replaced when compressor hums but will not start, or when the appliance stops cooling due to compressor protection
• Works as part of the compressor start/protection assembly alongside the start relay and capacitor

• Disconnect power to the appliance before accessing the compressor or electrical components
• Handle terminals carefully and reconnect to the matching terminals only; do not modify leads
• Verify the part number against the existing component before installation

This duct cap assembly seals and finishes the dryer exhaust opening, directing airflow out of the appliance while protecting the duct connection from damage. It restores a secure exhaust path and helps maintain proper venting performance. What it does:

• Covers and secures the dryer exhaust/duct outlet to provide a stable connection point for the vent hose.
• Helps prevent air leaks at the duct connection that can reduce drying efficiency.
• Replaces cracked, broken, or missing outlet caps that cause rattling or poor airflow.
• Supports proper exhaust routing to reduce lint buildup at the connection point.

• One duct cap assembly.

• Disconnect the appliance from power (and gas if applicable) before accessing the duct area.
• Move the appliance away from the wall to reach the rear exhaust; remove the old cap and any sealing tape or clamps.
• Reattach the duct hose and secure with the original clamp or a replacement clamp rated for dryer vents.
• After installation, run a short cycle to verify a tight fit and proper exhaust flow; inspect for leaks or unusual vibration.

This complete freezer door assembly replaces a damaged or worn freezer door to restore proper closure and cold retention. It fits the freezer compartment and includes the door shell and attached inner components for a like-for-like replacement. What it does:

• Replaces a cracked, dented, or warped freezer door to help prevent cold air loss
• Restores proper door alignment and sealing to reduce frost buildup and temperature issues
• Provides the original mounting points and inner components for easy fitment
• Helps the freezer maintain consistent performance when the old door can't close or seal properly

• Disconnect power to the appliance before starting any repair
• Remove food and shelves from the freezer area for access and safe handling
• Installation typically requires basic hand tools; support the door during removal/installation to avoid injury or damage
• If the door contains glass or trim, handle carefully.

This service (SVC) power control PCB assembly manages power sequencing and onboarding communications for compatible LG appliances, restoring proper start-up and control functions after a failed board. Designed as a direct replacement for the defective control module. What it does:

• Regulates power delivery and sequencing to appliance control systems during startup.
• Manages onboarding/communication signals between modules and the main control hub.
• Helps resolve symptoms like appliances that won't complete startup, show control errors, or fail to power on.
• Works as the electronic interface for related sensors and actuators tied to the control network.

• One SVC PCB power control board assembly.

• Disconnect power before accessing the control board to avoid shock and component damage.
• Handle the PCB by its edges and avoid static discharge; use a grounded wrist strap if available.
• Verify connectors and harness alignment before securing the board; do not force connectors.

This harness assembly is a factory-style wiring harness that routes power and control signals between the dispenser, ice maker and main control—restoring electrical connections for reliable dispenser and ice-maker operation. What it does

• Carries power and signal lines between the refrigerator control board, dispenser and ice maker
• Restores lost or intermittent dispenser power and control communication
• Helps stop intermittent ice-maker cycling or dispenser failures caused by damaged wiring
• Eliminates loose, corroded or broken connector problems on the original harness

• One harness assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle connectors gently and match keyed plugs to their mating sockets
• Inspect connector pins and wiring routing; replace any damaged clips or grommets

This replacement door basket restores usable storage space inside the refrigerator door, keeping bottles and condiments organized and secure. Durable plastic construction provides a stable shelf for everyday items. What it does:

• Replaces a cracked, broken, or missing door bin to restore door storage
• Holds bottles, jars and small containers to prevent shifting during use
• Prevents items from falling out when opening or closing the door
• Restores proper fit and alignment of door shelving where damaged

• Remove food and lower door shelves before installing to avoid damage
• Snaps into existing door track or support tabs; replace carefully to avoid breaking plastic clips
• Use only gentle pressure; do not force or pry with tools
• If clips are damaged, inspect adjacent mounting hardware and replace as needed

This hinge cover protects and conceals the appliance door hinge, keeping the hinge area clean and improving the door's finished appearance. It helps prevent debris buildup and keeps moving parts shielded from accidental contact. What it does:

• Covers the door hinge to protect pivot components from dust and grime
• Helps maintain a neat, factory-finish look around the hinge area
• Reduces risk of snagging or accidental contact with the hinge
• Compatible replacement for worn, cracked, or missing hinge trim

• One hinge cover

• Remove power and open the door per your appliance's safety instructions before servicing
• Installation typically requires removing a few screws or clips; retain fasteners from the original cover if possible
• Use common hand tools and avoid forcing plastic tabs to prevent breakage

This lamp cover is the replacement light lens that protects and diffuses the appliance's internal lamp, restoring even illumination and shielding the bulb from moisture and debris. It's a direct-fit exterior lens for the lamp assembly. What it does:

• Protects the interior lamp from dust, moisture and impact to help prevent bulb damage
• Diffuses and directs light for even illumination inside the compartment
• Restores a cracked, yellowed or missing lens to improve visibility
• Helps maintain the lamp assembly's proper fit and alignment

• One lamp cover / light lens

• Power off and unplug the appliance before beginning any service
• Remove lamp bulb per manufacturer instructions before replacing the cover to avoid damage
• Use proper tools and handle the lens gently to avoid scratching or cracking
• If mounting clips or screws are worn or missing, replace them separately