Lfxs28968s Parts

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This case assembly PCB is the main power control board that manages a range of washer functions, replacing a failed or damaged control module to restore normal electronic operation. It delivers the board needed for repair without extra components. What it does:

• Controls power distribution and electronic signals for the appliance's control functions.
• Helps resolve intermittent power loss, unresponsive controls, or failure to start when the board is the cause.
• Regulates signals between buttons/knobs and the appliance's internal systems.
• Works as the replacement PCB for units where the original control module has burnt, corroded, or physically damaged circuitry.

• One case assembly PCB (power control) as shown.

• Turn off and unplug the appliance before attempting any diagnostics or replacement.
• Handle the PCB by the edges and avoid touching component contacts to prevent static damage.
• Verify correct board orientation and connector seating; use the OEM wiring layout or photos.

This cover assembly protects a control board's printed circuit board (PCB) by shielding it from dust, moisture, and accidental contact. It helps keep the PCB secured and reduces the chance of shorting or damage during normal use. What it does:

• Shields the PCB from dirt, splashes, and foreign objects that can cause shorts or corrosion
• Secures the board in place to prevent movement and stress on connectors
• Helps maintain safe separation between live circuitry and user-accessible areas
• Reduces intermittent electrical issues caused by debris or loose components

• Always disconnect power to the appliance before starting any repair
• Handle the PCB and cover with care to avoid static discharge; use proper ESD precautions if available
• Align the cover to the board and fasten using the existing mounting points; do not overtighten screws
• After installation, restore power and verify normal operation

This hinge cover assembly replaces a damaged or missing hinge trim to protect the hinge mechanism and restore the appliance's finished appearance. It snaps into place over the hinge area for a clean, secure fit. What it does

• Covers and protects the hinge mechanism from dirt and debris.
• Restores the appliance's finished appearance when the original cover is cracked or broken.
• Helps prevent accidental contact with moving hinge parts.
• Common symptom: visible broken or missing hinge trim exposing the hinge.

• One hinge cover assembly.

• Disconnect power (and water, if appliance type requires) before starting any repair.
• Remove any outer panels or trim as needed to access the hinge per the appliance service instructions.
• Handle plastic trim pieces carefully to avoid cracking during removal/installation.

This tray cover assembly replaces a damaged or missing lid that protects and contains the appliance tray, restoring proper coverage and helping keep contents secure. It's a direct-fit replacement designed for straightforward swap-out. What it does:

• Covers and protects the tray to help prevent spills and contamination.
• Restores proper alignment and fit for trays that won't seat fully without the cover.
• Reduces stray debris from entering the tray area.
• Commonly replaces cracked, warped, or broken covers that impair function.

• Power off and unplug the appliance before starting any repair.
• Remove any items from the tray area and work on a clean, flat surface.
• Gently unclip or lift the old cover (retain any small clips or fasteners) and snap the new cover into place until fully seated.
• If any clips or adjacent parts are damaged, replace them before use; do not force the part into position.

This door foam assembly replaces the inner insulation inside a refrigerator door to help restore thermal performance and reduce condensation. Fits behind the interior door panel to improve temperature retention and efficiency. What it does:

• Replaces damaged or compressed foam that can allow cold air to escape
• Helps reduce interior door condensation and frost buildup
• Restores even cooling and can prevent warm spots near the door
• Works with door panel and gasket to maintain proper insulation

• One door foam assembly

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the interior door panel and any trim or hardware
• Handle foam gently; avoid tearing and ensure proper positioning before reassembling the panel

This refrigerator door foam assembly replaces the factory insulation inside the door to help restore proper thermal performance and reduce cold spots. It fits behind the door liner to improve internal insulation and control condensation. What it does:

• Replaces damaged or compressed door insulation that can lead to uneven cooling or cold spots
• Helps reduce interior condensation forming on the door surface when installed correctly
• Restores the door's intended thermal barrier to support stable temperatures inside the cabinet
• Helps maintain proper spacing and support for the inner door liner

• One refrigerator door foam assembly (1 count)

• Disconnect power to the appliance before starting any repairs
• Access requires removing the door liner/panels; handle the liner and foam carefully to avoid damage
• Use appropriate tools and follow manufacturer service instructions for reassembly and fastener torque

This door foam assembly replaces the insulation inside a refrigerator door to help maintain internal temperatures and reduce condensation. It restores proper door insulation for improved cooling efficiency and consistent food preservation. What it does:

• Replaces worn or damaged foam insulation inside the refrigerator door to help minimize cold air loss.
• Helps reduce condensation and frost buildup along the door interior and gasket area.
• Supports overall temperature stability for better cooling performance.
• Useful when door panels are removed for repair, dent repair, or after water damage.

• Intended for installation behind the refrigerator door interior panel; panel removal may be required.
• Use basic hand tools; retain all screws and clips removed during disassembly.
• Disconnect power or follow manufacturer safety guidance if working near electrical components.

This rail guide assembly keeps a refrigerator drawer aligned and sliding smoothly so you can open and close it without sticking or sagging. It restores proper drawer support and alignment for reliable everyday use. What it does:

• Supports the drawer on its track so the drawer slides in and out evenly
• Guides movement to prevent binding, sticking, or uneven operation
• Helps reduce noise from rubbing or misaligned drawer slides
• Restores proper drawer height and prevents sagging or catching

• Remove all contents from the drawer before beginning work
• Use basic hand tools; handle plastic parts gently to avoid cracking
• Reassemble drawer and test smooth operation before returning items to the drawer
• If the drawer is heavy or awkward, get help to avoid dropping the drawer or injuring yourself

This refrigerator shelf assembly replaces a cracked, damaged or missing glass shelf to restore stable storage and organization inside the fresh food compartment. The tempered glass shelf offers a flat, easy-to-clean surface for storing food and containers. What it does

• Provides a stable, level surface for groceries and containers to prevent items from tipping or spilling.
• Restores proper shelf spacing and organization when an original shelf is broken or missing.
• Easy-to-clean glass helps contain spills and simplifies refrigerator housekeeping.
• Fits into existing shelf supports and rollers to integrate with the interior shelving system.

• Remove food and any loose items from the shelf area before starting; handle glass with care and wear cut-resistant gloves.
• Lift out the damaged shelf by angling as needed to clear supports; set the replacement into the same tracks or brackets.
• Test stability before returning items to the shelf.
• If shelves use trim or clips, keep and reinstall all original trim pieces.

This vegetable tray assembly replaces the crisper drawer that stores fruits and vegetables, restoring organized storage and easy access in the refrigerator. Durable plastic construction supports produce while sliding smoothly on its track. What it does:

• Holds and organizes fruits and vegetables in the refrigerator produce zone
• Provides a removable drawer for easy loading, cleaning, and access to food
• Restores proper fit and sliding function when a cracked or broken drawer causes sticking or poor alignment
• Helps contain spills and keeps produce separated from other fridge shelves

• Remove food and empty drawer before attempting replacement
• Typically slides into tracks; lift slightly to disengage and slide out, reverse procedure to install

This tray assembly fits the refrigerator fresh room and provides a stable, easy-to-clean surface for storing fruits and vegetables. It helps contain spills and supports the fresh room drawer for organized, fresher produce storage. What it does:

• Serves as the bottom tray for the fresh room/crisper area to hold produce and containers
• Catches minor spills and drips to protect the cabinet interior
• Provides a smooth surface for the fresh room drawer to slide on and sit level
• Restores proper storage function when a cracked or warped tray reduces usability

• Unplug or disconnect power to the appliance before servicing for safety.
• Remove the fresh room/crisper drawer to access and replace the tray; reinstall the drawer afterward.
• Inspect surrounding rails and seals for damage during replacement; clean with mild soap and water.
• If the tray does not seat easily, confirm alignment and do not force to avoid breakage.