Lfxs307265s Parts

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

Replacement DC motor assembly that powers the appliance's drum/rotational system to restore tumbling or spinning. Fits as the drivetrain motor used when the original motor is worn, noisy, or no longer turning. What it does:

• Drives the drum or spin mechanism so the appliance can tumble or spin clothes as intended.
• Restores normal rotation when a failing motor causes no-tumble, no-spin, intermittent stopping, or humming without movement.
• Can correct grinding, squealing, or burning-odor symptoms when traced to a failed drive motor.
• Works with the existing mounting hardware and electrical connector on compatible models.

• Disconnect power (unplug or switch off breaker) before removing or installing the motor.
• Handle electrical connectors and wiring carefully; note connector positions and routing before disassembly.
• Inspect belt, pulleys, and mounting points while the motor is accessible and replace damaged components as needed.

This replacement cover assembly encloses and protects the unit's internal components while restoring a clean, finished exterior. Install a new cover when the original is cracked, dented, or no longer secures properly to ensure a solid fit and safe operation. What it does:

• Forms the exterior panel that shields internal components from dust, debris, and accidental contact
• Restores a clean appearance and supports proper alignment with adjoining panels
• Helps reduce vibration or rattling from a loose or damaged panel
• Typical symptoms include cracks, dents, broken mounting tabs, gaps, or poor fitment

• One cover assembly

• Disconnect power before servicing
• Remove perimeter screws/clips securing the original cover; retain fasteners for reuse
• Transfer any brackets, cushions, or labels from the old cover if needed
• Position the new cover, ensure edges are fully seated, and tighten fasteners evenly

This vegetable crisper drawer replaces a cracked or missing bin in your refrigerator. It restores smooth sliding access and organized produce storage, keeping items contained and easy to reach.

• Provides dedicated storage space for fruits and vegetables in the fresh food section
• Slides on the drawer rails for easy access to contents
• Helps contain spills and prevent items from falling into the compartment
• Typical symptoms include cracks, broken tabs, difficulty sliding, or the drawer falling off the rails

• Remove items and pull the old drawer straight out to release it from the rails
• Inspect and clean the shelf tracks/rails before installing the new drawer
• Align the drawer with the rails and push in gently until fully seated
• Handle carefully; avoid forcing or overloading to prevent damage

Restore a sturdy, easy-sliding produce bin with this replacement vegetable crisper drawer. It keeps fruits and vegetables organized and, when used with the matching cover, helps support proper humidity conditions in the refrigerator. What it does:

• Provides a dedicated bin for storing fresh produce under the crisper shelf
• Slides on the factory rails for smooth opening and closing
• Works with the crisper cover/humidity control to help manage moisture
• Common failure symptoms: cracked or broken bin, damaged corners/tabs, drawer sticks, falls off track, or won't stay seated

• 1 vegetable crisper drawer (tray assembly)

• Unplug the refrigerator before servicing
• Remove contents, then slide the old drawer straight out; remove the shelf above if needed
• Transfer any reusable inserts from the old bin if applicable
• Align the new drawer on the rails and slide it in fully; verify smooth operation

This Vegetable Tray Assembly is the refrigerator's crisper drawer for the fresh food section. Replace a cracked or missing bin so produce stores neatly and the drawer slides properly in its tracks.

• Provides a dedicated bin for fruits and vegetables in the fresh food compartment
• Slides on the crisper tracks beneath the shelf/cover for easy access
• Restores proper fit and smooth operation of the drawer
• Common reasons to replace: cracked or broken bin, broken tabs/lip, drawer won't slide correctly, or a missing drawer

• Remove contents, pull the old drawer out to the stop, then lift the front and pull free from the rails
• Align the new drawer with the tracks and slide it fully into place
• No tools typically required; handle plastic carefully and do not force parts

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This glass refrigerator shelf assembly replaces a damaged or worn interior shelf to restore stable storage and easy cleaning. It provides a flat, durable surface for organizing food and containers inside the fridge. What it does:

• Replaces a broken, cracked, or chipped interior glass shelf
• Restores a level storage surface for safe stacking of items
• Helps contain spills for easier cleanup and prevents mess from dripping below
• Fits into existing shelf rails or supports to resume normal shelf function

• One refrigerator glass shelf assembly

• Use gloves to avoid cuts when handling broken glass; disconnect power if removing shelves near electrical components
• Slide into the existing shelf supports or clips; no special tools typically required
• Replace damaged supports or clips before installing the shelf
• Dispose of broken glass safely and follow local recycling/disposal rules

This damper controls airflow between compartments to help maintain proper temperatures and consistent cooling. It replaces a worn or broken damper to restore normal airflow and temperature balance inside the appliance. What it does:

• Regulates air flow between compartments so the refrigerator can maintain set temperatures
• Helps reduce uneven cooling and temperature swings caused by a stuck or broken damper
• Works as part of the appliance's air distribution system to route cooled air where needed
• Common symptom: compartment temperature too warm or inconsistent airflow noise from the damper area

• One damper assembly

• High-level replacement; access usually requires removing interior panels or duct covers
• Disconnect power before any repair to avoid shock or injury
• Handle with care to avoid bending or damaging mounting tabs and linkage

This power control board manages and distributes electrical power to the appliance's major systems, restoring control functions when the original board fails. It's a direct-replacement control module used to regain normal operation. What it does:

• Regulates power and control signals for motors, valves, heaters, and user interface circuits
• Replaces a failed or damaged control board that can cause the appliance to not power on or to behave erratically
• Common symptom fixes: intermittent power, no response from controls, or control/display errors
• Works as the main electronic control hub that coordinates timed cycles and safety interlocks

• Disconnect power before starting any repair
• Use anti-static precautions and handle the PCB by its edges to avoid damage
• Verify connector orientations and secure all wiring before restoring power

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This Air Filter Assembly helps reduce odors and airborne particles inside the appliance for fresher-smelling air and improved interior environment. Designed as a direct-replacement filter assembly matching the OEM design. What it does:

• Captures odors and helps reduce airborne contaminants that cause unpleasant smells
• Restores the appliance's built-in air-cleaning function when the original filter is worn or missing
• Commonly replaced when you notice persistent odors or reduced air freshness inside the appliance
• Works as part of the appliance's ventilation/air circulation system to maintain interior air quality

• One complete air filter assembly (as shown)

• Refer to your appliance manual for the correct access panel and replacement procedure
• Replace with the appliance powered off and follow basic electrical safety if removal requires accessing wiring
• Verify correct orientation and secure mounting so the filter seals properly in the housing
• Dispose of the old filter per local regulations

This front plate assembly replaces the damaged or worn front-facing plate on compatible LG appliances, restoring the unit's appearance and protecting internal components. It's a direct-fit exterior panel used where the front surface is cracked, dented, or missing. What it does:

• Covers and protects internal components behind the appliance's front area
• Restores a uniform exterior finish and eliminates gaps or exposed parts
• Helps maintain proper alignment of adjacent trim and controls
• Suitable when the visible front surface is cracked, dented, or cosmetically damaged

• One front plate assembly as shown

• Installation typically requires removing adjacent trim and fasteners
• Handle edges carefully and support the assembly to avoid scratching finishes
• Disconnect power to the appliance before beginning work to prevent injury
• If clips or screws from the original assembly are worn or missing, replace them with OEM-specified fasteners