Lfxs30796s Parts

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This replacement cover assembly encloses and protects the unit's internal components while restoring a clean, finished exterior. Install a new cover when the original is cracked, dented, or no longer secures properly to ensure a solid fit and safe operation. What it does:

• Forms the exterior panel that shields internal components from dust, debris, and accidental contact
• Restores a clean appearance and supports proper alignment with adjoining panels
• Helps reduce vibration or rattling from a loose or damaged panel
• Typical symptoms include cracks, dents, broken mounting tabs, gaps, or poor fitment

• One cover assembly

• Disconnect power before servicing
• Remove perimeter screws/clips securing the original cover; retain fasteners for reuse
• Transfer any brackets, cushions, or labels from the old cover if needed
• Position the new cover, ensure edges are fully seated, and tighten fasteners evenly

This vegetable crisper drawer replaces a cracked or missing bin in your refrigerator. It restores smooth sliding access and organized produce storage, keeping items contained and easy to reach.

• Provides dedicated storage space for fruits and vegetables in the fresh food section
• Slides on the drawer rails for easy access to contents
• Helps contain spills and prevent items from falling into the compartment
• Typical symptoms include cracks, broken tabs, difficulty sliding, or the drawer falling off the rails

• Remove items and pull the old drawer straight out to release it from the rails
• Inspect and clean the shelf tracks/rails before installing the new drawer
• Align the drawer with the rails and push in gently until fully seated
• Handle carefully; avoid forcing or overloading to prevent damage

Restore a sturdy, easy-sliding produce bin with this replacement vegetable crisper drawer. It keeps fruits and vegetables organized and, when used with the matching cover, helps support proper humidity conditions in the refrigerator. What it does:

• Provides a dedicated bin for storing fresh produce under the crisper shelf
• Slides on the factory rails for smooth opening and closing
• Works with the crisper cover/humidity control to help manage moisture
• Common failure symptoms: cracked or broken bin, damaged corners/tabs, drawer sticks, falls off track, or won't stay seated

• 1 vegetable crisper drawer (tray assembly)

• Unplug the refrigerator before servicing
• Remove contents, then slide the old drawer straight out; remove the shelf above if needed
• Transfer any reusable inserts from the old bin if applicable
• Align the new drawer on the rails and slide it in fully; verify smooth operation

This Vegetable Tray Assembly is the refrigerator's crisper drawer for the fresh food section. Replace a cracked or missing bin so produce stores neatly and the drawer slides properly in its tracks.

• Provides a dedicated bin for fruits and vegetables in the fresh food compartment
• Slides on the crisper tracks beneath the shelf/cover for easy access
• Restores proper fit and smooth operation of the drawer
• Common reasons to replace: cracked or broken bin, broken tabs/lip, drawer won't slide correctly, or a missing drawer

• Remove contents, pull the old drawer out to the stop, then lift the front and pull free from the rails
• Align the new drawer with the tracks and slide it fully into place
• No tools typically required; handle plastic carefully and do not force parts

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The motor bracket assembly secures the motor inside your appliance, keeping it aligned and stable. Replacing a damaged bracket helps reduce vibration-related noise and prevents the motor from shifting or rubbing during operation.

• Securely supports and positions the motor within its housing
• Maintains proper alignment and clearance to prevent rubbing or scraping
• Helps reduce vibration and rattling noises from a loose or broken mount
• Replaces cracked, warped, or broken brackets that allow the motor to move

• Disconnect power to the appliance before servicing; wear cut-resistant gloves.
• Remove the necessary cover/panel to access the motor area.
• Transfer the motor and any cushions/grommets and screws from the old bracket to the new one.
• Ensure moving parts rotate freely and wiring is secured before reassembly.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This glass refrigerator shelf assembly replaces a damaged or worn interior shelf to restore stable storage and easy cleaning. It provides a flat, durable surface for organizing food and containers inside the fridge. What it does:

• Replaces a broken, cracked, or chipped interior glass shelf
• Restores a level storage surface for safe stacking of items
• Helps contain spills for easier cleanup and prevents mess from dripping below
• Fits into existing shelf rails or supports to resume normal shelf function

• One refrigerator glass shelf assembly

• Use gloves to avoid cuts when handling broken glass; disconnect power if removing shelves near electrical components
• Slide into the existing shelf supports or clips; no special tools typically required
• Replace damaged supports or clips before installing the shelf
• Dispose of broken glass safely and follow local recycling/disposal rules