Lgbd2435nwoa Parts

This thermistor is the dishwasher's temperature sensor. It reports water temperature to the control so the heater and cycle timing are managed correctly, helping restore reliable wash performance and more consistent drying.

• Monitors water temperature in the tub/sump and sends readings to the control board
• Helps the control regulate heater operation and determine cycle progress/timing
• Failure can result in no heat or poor drying
• May cause unusually long/short cycles or temperature-related fault codes

• Disconnect power at the breaker and shut off the water supply before servicing
• Access is typically from the toe-kick/base area or sump; remove the lower access panel as needed
• Release the locking tab/clip, remove the sensor, and ensure the existing seal/O-ring is properly seated; install the new sensor fully to prevent leaks
• Reconnect the wire harness, restore power, and run a test cycle to check for leaks and proper heating

This Shield is a protective cover used in select appliances. It helps guard nearby components and guide airflow or heat as designed, restoring proper protection when the original shield is cracked, warped, damaged, or missing.

• Acts as a barrier/deflector to protect components from heat, moisture, grease, or debris as designed for your model
• Helps maintain intended airflow, heat path, or splash control inside the appliance
• Replace if the shield is cracked, warped, burned, broken, or missing
• Symptoms can include visible damage, scorched or discolored areas near the shield, rattling/vibration, or exposed areas that were previously covered

• Disconnect power before servicing; also shut off gas
• Wear gloves—edges can be sharp on metal shields
• Reuse original screws/clips unless your model provides replacements
• Seat the shield flat and do not overtighten fasteners

Filter only. Fine filter not included.

A replacement bearing that supports the dryer drum and restores smoother, quieter rotation. Replaces a worn or damaged bearing to help reduce noise and prevent excess drum play. What it does

• Provides a low-friction mounting point for the drum shaft to rotate smoothly
• Keeps the drum aligned and reduces wobble during operation
• Helps prevent metal-on-metal contact that causes grinding or rumbling noises
• Can reduce strain on the motor and belt by restoring proper drum support

• Disconnect power before beginning any disassembly
• Replacement typically requires removing panels and the drum;
• Inspect surrounding seals, shafts, and mounting hardware and replace if worn

This genuine replacement screw secures appliance panels and components so assemblies stay tight and stable. It's a simple, direct fix when a missing or damaged screw causes loose trim, rattling, or misaligned parts. What it does:

• Fastens panels, brackets, and trim to restore proper alignment and stability
• Stops rattling or vibration caused by loose hardware
• Replaces stripped or corroded screws to ensure secure connections
• Works wherever the OEM screw is specified in the appliance

• Use the matching driver and proper torque to avoid stripping the head or threads
• Replace only with the exact OEM screw to maintain fit and function
• Disconnect power before accessing internal components; follow appliance safety instructions
• Replace all like-for-like for best results

This cup shelf is a direct-fit refrigerator door bin that restores secure storage for cups, bottles and small containers. It replaces a cracked, warped or missing shelf so items stay organized and won't shift on the door. What it does:

• Provides a stable ledge for cups, bottles and small containers on the refrigerator door
• Replaces damaged or cracked door shelving that can no longer support items
• Helps prevent spills and items sliding or falling when the door is opened or closed
• Matches the original shelf shape to maintain proper fit and alignment

• Basic snap-in/screw-in installation; your model's door assembly instructions
• Remove power to the appliance or work with the door empty for safe handling
• Handle carefully to avoid chipping; wear gloves if edges are sharp
• If fasteners are present, reuse original screws/clips or replace with OEM equivalents

Replacement refrigerator door handle that restores a secure grip and reliable opening for compatible Frigidaire units. Replaces worn, cracked, or missing handles to improve usability and the appliance's appearance. What it does:

• Provides a stable grip for opening and closing the refrigerator door.
• Replaces handles that are cracked, broken, loose, or missing.
• Restores original mounting points and clearance so the door operates smoothly.
• Improves the look of the appliance by replacing damaged or discolored hardware.

• Disconnect power to the appliance before starting any repair.
• Removal may require lifting end caps or trim and removing mounting screws—use the correct tools.
• Keep original screws and trim; confirm orientation before removing the old handle.
• Your model's service manual or OEM instructions for exact disassembly and torque details.

This replacement refrigerator door handle restores a secure grip for opening and closing the fridge. It replaces a cracked, loose, worn or broken handle so the door operates safely and looks finished. What it does:

• Provides a sturdy grip to open and close the refrigerator door
• Replaces handles that are cracked, chipped, loose or no longer secure
• Helps maintain proper door alignment and a finished exterior appearance
• Prevents further damage from using a compromised handle

• Check that this handle matches the mounting holes and orientation on your door before installation
• Tighten screws evenly; over-tightening may crack plastic components
• Disconnect power to the appliance before working in tight areas or near electrical components as a precaution

This replacement brace is a support bracket that helps secure and stabilize appliance panels and components, restoring proper alignment and reducing vibration. Designed for direct fit where the original bracket is damaged or missing. What it does:

• Provides structural support to panels, frames, or assemblies to maintain alignment and fit
• Secures components to prevent wobbling, rattling, or movement during operation
• Helps restore proper door or panel fit when a broken or bent bracket causes misalignment
• Reduces noise caused by loose or unsupported parts

• One replacement brace

• Disconnect power or unplug the appliance before starting any work
• Use the original screw locations and hardware where possible; save any reusable fasteners
• Inspect surrounding panels and mounting points for additional damage before reassembly