Lgid 2475Qfoa Parts

The NUT is an OEM component specifically designed for Frigidaire dishwashers. This nut plays a vital role in maintaining stability and secure positioning of internal dishwasher components. 

Symptoms of a bad nut include movement or wobbling of interior dishwasher parts, odd noises emanating from within the unit, or leaks developing around improperly positioned or tightened components.

Causes of a bad nut can include wear and tear over time, damage from excess strain on connectors and joints, or improper installation during assembly. 

Some symptoms of a bad nut include:

• Vibration or shaking of internal parts 
• Loose interior panels or assemblies
• Difficulty latching or securing the dishwasher door
• Water leaks into areas not designed for moisture

This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, Kelvinator, and select Kenmore models. 

This control assembly is the appliance's main electronic console that manages cycles, settings, and user inputs for proper operation. Replacing a faulty control restores responsive controls and reliable cycle selection. What it does:

• Receives and processes user commands from the front console
• Sends signals to timers, motors, valves, and heaters to run selected cycles
• Prevents or causes erratic operation when the control fails (unresponsive buttons, no start, or incorrect cycles)
• May display error codes or no display when the control is faulty

• One control assembly

• Disconnect power to the appliance before beginning any work
• Handle electronic boards and ribbon connectors carefully to avoid static or physical damage
• Retain all mounting hardware and transfer any brackets or connectors from the old control if needed

This is a small mounting clip used to secure panels and trim on compatible Frigidaire appliances, helping keep exterior parts aligned and stable. Replaces a worn or broken clip to reduce rattling and loose panels. What it does:

• Secures trim, panels or small components to the appliance frame
• Prevents movement that can cause rattling, gaps or misaligned panels
• Replaces clips that are cracked, bent or missing, restoring proper fit
• Designed for a discreet, low-profile hold without affecting appearance

• Turn off and unplug the appliance (or shut off power) before accessing panels
• Remove surrounding trim or screws as needed to reach the clip location
• Press or snap the clip into place; use care to avoid cracking plastic parts

These side strips are exterior cabinet trim pieces that restore a finished look and protect the refrigerator cabinet edges. They replace damaged, loose, or missing side trim to improve appearance and help keep edges covered. What it does:

• Covers and protects the vertical cabinet edges from chips, dings, and everyday wear
• Conceals gaps between the cabinet and the door or liner for a neater appearance
• Replaces cracked, warped, or missing trim that can make the appliance look worn
• Helps maintain a continuous exterior finish along the refrigerator sides

• Service-friendly trim; typically snaps or screws into place—inspect fasteners before removal
• Remove damaged strips carefully to avoid scratching the cabinet; use appropriate trim tools if needed
• Keep work area clear and support panels during installation to prevent drops or damage
• If working near electrical components, unplug the appliance or turn off power at the breaker

This replacement rail restores smooth sliding and support for a drawer or shelf assembly, helping the component open and close reliably. Use when a worn or damaged rail causes sticking, misalignment, or instability. What it does

• Provides a guided track for a drawer or shelf to slide in and out
• Replaces bent, cracked, or worn rail surfaces that cause sticking or catching
• Helps eliminate wobbling, uneven travel, or a drawer that falls out of the track
• Restores proper alignment so the drawer or shelf seats and locks correctly

• One replacement rail

• Disconnect power to the appliance and remove contents before servicing
• Remove the drawer or shelf to access mounting fasteners
• Use basic hand tools; keep track of clips and screws for reassembly
• Inspect the opposite rail/sides; replace matching components if worn for best performance

This replacement leveling foot provides a stable, height-adjustable support for your appliance so it sits level and reduces rocking. It restores proper alignment for smooth door operation and even weight distribution. What it does:

• Replaces a worn or damaged support foot to stop rocking and improve stability
• Allows small height adjustments to level the appliance on uneven floors
• Helps maintain proper door closure and reduce vibration noise
• Fits under the appliance cabinet and bears operational weight

• One leveling foot

• Unplug the appliance or disconnect power before working underneath it
• Use a helper or an appliance dolly to safely raise and support the unit while replacing the foot
• Thread the foot into the mounting bracket or cabinet insert until it contacts the floor, then adjust as needed

This Overflow Hose is an OEM part for Frigidaire dishwashers. This ensures proper water drainage during the dishwasher's operation, preventing overflows and leaks.

Causes of a Bad Part: Over time, the overflow hose can degrade due to exposure to heat, chemicals, or physical damage. Blockages or kinks might also impede proper water flow.

Symptoms of a Bad Part:

• Water leaks from the dishwasher
• Inadequate drainage leading to overflows
• Visible cracks or damage on the hose

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement rail restores smooth, reliable sliding for a drawer or bin so it opens and closes without sticking or sagging. It provides a direct, OEM-style fit when the original rail is worn or damaged. What it does:

• Supports the drawer/bin and keeps it aligned in the cabinet or housing
• Guides motion so the drawer slides in and out smoothly
• Reduces noise, binding, and sagging caused by a worn rail
• Helps prevent drawer misalignment that can block proper closure

• Disconnect power and remove stored items before starting work
• Remove the drawer or bin to access mounting screws; reinstall in the same orientation
• Use basic hand tools; hold the drawer steady while securing the rail
• Test operation several times after installation and tighten fasteners if needed

The Detergent Dispenser is an OEM part for Frigidaire dishwashers. It dispenses the necessary doses of detergent at precisely timed intervals during cycle operation. 

Causes of dispenser malfunction stem from normal wear over extended use. Mineral buildup can accumulate inside inhibiting proper dispensing action. Mechanical or electronic components controlling release functions are also susceptible to failure.

Symptoms of a bad dispenser include:

• Dishes not getting completely clean after cycles
• Residual food or film left on dishware   
• Error codes related to detergent supply issues
• Leaks or spills from the dispenser area

This OEM Frigidaire part is also compatible with some Electrolux, Gibson, and Kenmore appliance models. 

This replacement screen is a mesh filter used in select appliances to block debris from entering the assembly it protects. It helps maintain proper flow and reliable operation when the original screen is missing, torn, or clogged.

• Acts as a protective mesh that traps debris before it reaches critical components
• Helps maintain proper airflow or water flow, depending on the application
• Replace if the mesh is torn, warped, brittle, or heavily contaminated
• Symptoms can include restricted flow, reduced performance, or rattling/vibration near the affected area

• Disconnect power; shut off water supply if applicable before servicing
• Allow hot surfaces to cool and wear cut-resistant gloves
• Note the orientation of the original screen and install the new one the same way
• Do not overtighten fasteners or fittings during reassembly