Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the door hinge in place for smooth opening and closing. Replace this small retaining clip if worn, broken, or missing to restore proper alignment.
Removed and replaced start switch then motor, no joy. removed the timer for disassembly, found bad contact. soldered contact to the spring tab and assembled and installed the timer. All good now. Read more
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
It was very easy to fix after watching your video.. Read more
Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.
Replaced belt and idler arm, just to be safe. Read more
Dryer not heating or running too hot? This high-limit thermostat regulates temperature to prevent overheating. Easy DIY fix takes 30 minutes or less.
FIRST I PULL THE DRYER OUT FROM THE WALL AND TOOK THE BACK OFF. WITH A 5/16 NUT DRIVER. NEXT WITH A LIGHT SET UP I LOOKED FOR ANY BURNT, BROKEN,OR LOSE WIRES THAT MY HAVE COME OFF ANY CONNECTIONS. I HAVE AN ELECTRIC DRYER AND AS I LOOKED DOWN TO THE HEATING COIL AREA, WHAT I WILL CALL A HI-TEMP SWITCH I COULD SEE THAT THE PART APPEARED BURNT. I PULLED THE POWER PLUG AND TOOK MY VOLT, OHM, MIL'LI'AMP METER, SET IT TO OHMS ON ABOUT 20K. THEN I TOOK MY NEEDLE NOSE PLIERS AND PULLED ONE WIRE... Read more
Exterior cover that restores your dryer's finished appearance and shields internal components. Replace if cracked, broken, or missing to maintain protection.
Replaced broken coupling with new coupling Read more
Lint trap won't slide in all the way or gets stuck? A damaged or obstructed lint chute assembly is usually the cause. Straightforward 30-minute repair.
I replaced the chute and screen - I am very mechanical and have good tools - it took me less than 30 minutes - would take many people longer but it is a straightforward project Read more
Almond spray paint for appliance exteriors. Covers scratches, chips, and worn finishes on refrigerators, freezers, and other units. 13 oz can.
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !! Read more
Vinyl door seal lines the dryer door perimeter to block air leaks and cushion closure. Replace when worn or cracked to restore a tight seal. Verify fit by model.
Ordered new gasket and adhesive! Read more
Touch-up paint for appliances in almond color. Repairs chips, scratches, and worn spots on ovens, refrigerators, microwaves, and dryers.
Replaced. Shippping was very fast. A good experience. Read more
Right-hand hinge for dryer lint filter cover. Replaces broken or missing hinges that hold the lint screen door in place. Easy snap-in installation.
Replaced front bearing and seal kit, rear drum roller kit, idler pulley, and dryer belt. Read more
Connects lint screen lid to dryer, enabling smooth opening and secure closing. Replace when bent, cracked, or broken to restore proper lid operation.
I replaced it Read more
Replacement drum baffle that lifts and tumbles clothes inside the dryer drum. Needed when original is cracked, broken, or missing from the drum wall.
Fix dryer electrical connection issues with this terminal. Common when dryer won't start or power cuts out. Simple plug-in repair for most models.
Fix dryer electrical connection issues with this terminal. Used for wiring connections in heating and control circuits. Simple installation in minutes.
Gray acrylic spray paint for coating worn or chipped dryer drum interiors. Restores the protective finish when the original coating is scratched or flaking.
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more
Fix dryer drum rattling noise with this lock nut. Secures drum rollers, pulleys, and shafts to prevent loosening from vibration. Simple DIY fix.
The cylinder roller that supports the dryer drum was worn and needed to be replaced. I ordered the idler pulley shaft and associated parts as well since I wasn't sure if these were worn too. Watching the video on the web site gave me a good idea what was involved and where to look. It wasn't my exact model and make but provided sufficient information on what to look for. The parts were exact fits which was a great relief abd the dryer is running like new again! Read more