Lmv1660bb Parts

This keypad controller assembly is the user-facing control module that accepts button input from the appliance control panel and communicates commands to the main control board, restoring reliable input and display response. What it does:

• Converts button presses into signals the main control board can read
• Restores responsive or stuck/unresponsive buttons and touch controls
• Resolves intermittent control, unregistered inputs, or loss of panel feedback
• Addresses control-related error messages when caused by a faulty keypad interface

• Always disconnect power at the breaker or unplug the appliance before servicing
• Handle the assembly and any ribbon cables gently to avoid damage; avoid touching exposed circuit traces
• Reconnect all wiring and verify correct orientation before restoring power

This thermostat controls oven/dryer temperature by opening or closing its contacts as the appliance reaches set temperatures, helping maintain safe and consistent operation. Replaces a worn or failed thermostat to restore proper temperature regulation. What it does:

• Senses temperature and interrupts heating when limits are reached to prevent overheating
• Re-establishes heating when temperature falls, maintaining normal cycle performance
• Commonly installed when an appliance won't heat, overheats, or cycles erratically
• Works as a direct replacement for the OEM thermostat designed for compatible LG units

• One thermostat

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Note wire locations or take a photo before removing wiring; reconnect wires to the same terminals
• Use a multimeter to verify thermostat continuity and correct operation before and after replacement

This factory fastener secures appliance panels and components. Use it to replace a missing, stripped, or corroded screw so brackets, covers, and assemblies stay tight and properly aligned, helping reduce vibration and rattling.

• Secures panels, brackets, and internal components in their proper positions
• Replaces missing, worn, or cross-threaded hardware
• Helps eliminate vibration and rattling from loose parts
• Supports proper alignment of covers and assemblies

• Disconnect power to the appliance before servicing; allow any moving parts to stop
• Match this screw to the location shown in your model's parts diagram
• Start threads by hand to avoid cross-threading, then tighten snugly with the correct driver
• Do not overtighten to prevent stripping threads or cracking plastic bosses

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This truss head tapping screw secures interior panels and small components on compatible appliances, restoring proper fit and stopping rattles or loose trim. It's a direct hardware replacement for a single mounting point. What it does:

• Fastens panels, brackets, and trim where a low-profile truss head is required
• Replaces missing or stripped screws that cause rattling or loose parts
• Provides a secure hold by forming threads in sheet metal during installation
• Useful for repairing cosmetic or functional panel alignment issues

• Disconnect power before working on any appliance to avoid shock or injury
• Use the correct sized Phillips or Torx driver to prevent cam-out or screw damage
• Start straight and thread slowly; do not overtighten to avoid stripping sheet metal
• Replace only with the exact part number for best fit and performance

This replacement mounting screw secures panels and small appliance components to restore proper fit and prevent vibration or loose parts. A simple, direct replacement when the original fastener is missing or damaged. What it does:

• Secures panels, brackets, or small assemblies to keep parts aligned
• Stops rattling or vibration caused by loose or missing screws
• Restores normal fit where a stripped or corroded screw failed
• Matches the OEM fastener form for a correct, long-lasting fit

• Unplug the appliance or disconnect power before servicing
• Use the correct driver to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or housing

This holder secures the door lock assembly to the washer, keeping the latch and lock mechanism aligned for reliable door closure and operation. Replaces a worn or broken lock mounting bracket to restore proper door engagement. What it does:

• Mounts and supports the washer door lock assembly to keep the latch aligned
• Holds the lock in place so the door can fully close and lock during cycles
• Common symptoms: door won't latch, door comes loose, washer won't start, or door/lock error codes
• Prevents excessive movement that can damage the lock or striker

• Unplug the appliance and turn off water supply before beginning work
• Basic hand tools (screwdriver, nut driver) are typically required; keep fasteners for reassembly
• Handle edges and the door/lock assembly carefully to avoid damage

This high-voltage transformer supplies the elevated voltage required by a microwave's magnetron so the oven can heat food. Replaces a failed transformer to restore proper high-voltage delivery and heating performance. What it does:

• Steps up the oven's line voltage to the high voltage needed by the magnetron
• Failsafe symptoms: microwave runs but does not heat, buzzing or humming from the oven, or a blown internal fuse
• Prevents intermittent heating and helps maintain consistent magnetron operation when functioning properly

• One high-voltage transformer

• Disconnect power and unplug the appliance before starting any repair
• The high-voltage capacitor can retain a lethal charge; discharge the capacitor before touching the transformer or related circuitry
• Verify the part number on your appliance matches EBJ60664602 before ordering

This genuine replacement door handle restores a secure grip and makes opening your refrigerator easy and reliable. It replaces a cracked, loose or broken handle to return normal door operation and appearance. What it does:

• Replaces a damaged or cracked handle so the door opens and closes properly
• Provides a firm, ergonomic grip to prevent slips and accidental drops
• Stops wobbling or loose movement caused by worn or broken handle mounting points
• Restores the refrigerator's finished appearance when the original handle is scratched or chipped

• One replacement refrigerator door handle

• Basic hand tools required; most installs use screws or hidden fasteners—keep removed hardware for re-use if undamaged
• Support the door while removing or installing the handle to avoid stress on hinges or seals
• Do not overtighten fasteners; snug is sufficient to prevent cracking the handle
• Disconnect power only if required by your model's service instructions.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

This replacement lever provides the control handle used to operate the appliance's door or dispenser, restoring solid, intuitive control and appearance. Ideal when the original handle is cracked, loose, or missing. What it does:

• Replaces a worn or broken control lever so controls move smoothly
• Restores proper engagement for opening/closing or dispensing actions
• Helps stop wobbling, slipping, or intermittent operation caused by damaged lever
• Keeps the appliance looking and functioning like new

• One replacement lever

• Basic hand tools usually required; disconnect power before servicing
• Follow OEM service manual for safe removal and installation
• If the lever fastens with clips or screws, inspect for broken retainers and replace as needed