Lmv1681 Parts

This door latch assembly for a microwave engages the door hooks and actuates the interlock switches so the unit recognizes a closed door, restoring proper latching and helping ensure the oven only operates when securely shut.

• Engages the door hooks to trigger the interlock switches and signal "door closed"
• Can help resolve no-start or "Door/Open-Close" indications with the door shut
• Addresses a door that won't latch, feels loose, or shows cracked/worn latch parts
• Built to mount in the original location and interface with existing door switches

• Disconnect power before service; microwaves contain high-voltage components that can retain a dangerous charge
• Access typically requires removing the control panel to reach the latch/interlock bracket
• Note switch orientation and spring positions; transfer any reusable hardware from the old assembly
• After installation, verify firm door engagement and proper interlock switch actuation before restoring power

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

Power Control Board (PCB assembly) that manages incoming power and distributes voltage to the appliance's control, motor and sensor circuits. Replacing a faulty board restores reliable power delivery and control to affected components. What it does:

• Regulates and routes power to control modules, motors and sensors — symptoms include appliance not powering on, intermittent shutdowns, or failure to start cycles.
• Supplies and stabilizes voltage for the control panel and displays — symptoms include dim or blank displays and intermittent or erratic control behavior.
• Interfaces with user controls and safety switches to enable normal operation — symptoms include unresponsive buttons, stuck cycles, or error codes.
• Contains protective components that can fail visibly — symptoms may include burning smell, scorch marks on the board, or tripped breakers.

• Disconnect power (unplug or switch off breaker) before accessing the appliance.
• Photograph wiring and connector positions before removal; compare connector types and board part numbers to fit.
• Avoid touching board components and use basic ESD precautions when handling the PCB.

This truss head tapping screw secures panels, brackets, and covers in your appliance. Replacing a missing or damaged fastener restores a snug fit, reduces vibration, and helps keep components properly aligned for reliable performance.

• Provides low-profile holding power; wide truss head helps secure thin panels and trim
• Replaces lost, stripped, or corroded screws at the original mounting points
• Helps eliminate rattling, vibration, or loose handles/covers
• Addresses situations where a screw will not tighten or backs out during use

• Disconnect power; shut off water/gas if applicable before servicing
• Align parts and hand-start threads to avoid cross-threading
• Tighten until snug; do not overtighten to prevent stripping
• If the receiving hole is damaged, for repair before installing the new screw

This microwave thermostat is the safety control that monitors temperature and opens the circuit if overheating is detected, protecting internal components. Replace it if your oven is dead, loses heat, or shuts off mid-cycle due to a failed thermostat. What it does:

• Monitors temperature and interrupts power when overheating occurs to help prevent damage
• Helps protect internal components and wiring from excessive heat
• Failure can cause: no power, shuts off during or shortly after starting, or runs but does not heat
• Replacing a failed thermostat helps restore normal operation and safety protections

• 1 thermostat

• Unplug the appliance; microwaves contain high-voltage components that can retain a lethal charge even when unplugged
• Remove the outer cover to access the thermostat; location varies by model
• Move wires one at a time to the new thermostat and mount it firmly against the mating surface for proper heat sensing
• Reassemble, restore power, and test operation

A high-voltage capacitor for the appliance's high-voltage circuit that stores and releases electrical energy to support proper heating operation. Replacing a failing capacitor can restore consistent heating and prevent related electrical faults. What it does:

• Stores and delivers high-voltage energy used by the magnetron/ high-voltage assembly to generate heat.
• Failure may cause no-heat or weak-heat conditions in the oven.
• Faulty capacitors can contribute to arcing, loud humming, or blown high-voltage fuses.
• Works as part of the HV circuit; not a user-serviceable low-voltage control.

• High-voltage components can hold a dangerous charge—disconnect power and discharge the capacitor before servicing.
• Use insulated tools and avoid touching terminals; verify proper operation with appropriate test equipment.

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This canopy resistor regulates current to a range-hood or canopy fan circuit to help the blower run at the correct speeds. Replacing a failing resistor can restore proper fan speed control and stop intermittent operation. What it does:

• Controls electrical resistance in the canopy/blower circuit to help regulate fan speeds.
• Helps prevent the motor from running only on a single speed or from failing to start at selected speeds.
• Can cause symptoms such as inconsistent fan speeds, no response from speed controls, or occasional fan cutoff.
• Works with the hood's wiring and control switch to deliver the correct voltage to the fan motor.

• Disconnect power to the appliance before accessing the canopy or electrical connections.
• Inspect wiring and connectors for heat damage or corrosion; replace harness or terminals if damaged.

This keypad controller assembly is the user-facing control module that accepts button input from the appliance control panel and communicates commands to the main control board, restoring reliable input and display response. What it does:

• Converts button presses into signals the main control board can read
• Restores responsive or stuck/unresponsive buttons and touch controls
• Resolves intermittent control, unregistered inputs, or loss of panel feedback
• Addresses control-related error messages when caused by a faulty keypad interface

• Always disconnect power at the breaker or unplug the appliance before servicing
• Handle the assembly and any ribbon cables gently to avoid damage; avoid touching exposed circuit traces
• Reconnect all wiring and verify correct orientation before restoring power

This factory fastener secures appliance panels and components. Use it to replace a missing, stripped, or corroded screw so brackets, covers, and assemblies stay tight and properly aligned, helping reduce vibration and rattling.

• Secures panels, brackets, and internal components in their proper positions
• Replaces missing, worn, or cross-threaded hardware
• Helps eliminate vibration and rattling from loose parts
• Supports proper alignment of covers and assemblies

• Disconnect power to the appliance before servicing; allow any moving parts to stop
• Match this screw to the location shown in your model's parts diagram
• Start threads by hand to avoid cross-threading, then tighten snugly with the correct driver
• Do not overtighten to prevent stripping threads or cracking plastic bosses

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This replacement mounting screw secures panels and small appliance components to restore proper fit and prevent vibration or loose parts. A simple, direct replacement when the original fastener is missing or damaged. What it does:

• Secures panels, brackets, or small assemblies to keep parts aligned
• Stops rattling or vibration caused by loose or missing screws
• Restores normal fit where a stripped or corroded screw failed
• Matches the OEM fastener form for a correct, long-lasting fit

• Unplug the appliance or disconnect power before servicing
• Use the correct driver to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or housing

This high-voltage transformer supplies the elevated voltage required by a microwave's magnetron so the oven can heat food. Replaces a failed transformer to restore proper high-voltage delivery and heating performance. What it does:

• Steps up the oven's line voltage to the high voltage needed by the magnetron
• Failsafe symptoms: microwave runs but does not heat, buzzing or humming from the oven, or a blown internal fuse
• Prevents intermittent heating and helps maintain consistent magnetron operation when functioning properly

• One high-voltage transformer

• Disconnect power and unplug the appliance before starting any repair
• The high-voltage capacitor can retain a lethal charge; discharge the capacitor before touching the transformer or related circuitry
• Verify the part number on your appliance matches EBJ60664602 before ordering

This genuine replacement door handle restores a secure grip and makes opening your refrigerator easy and reliable. It replaces a cracked, loose or broken handle to return normal door operation and appearance. What it does:

• Replaces a damaged or cracked handle so the door opens and closes properly
• Provides a firm, ergonomic grip to prevent slips and accidental drops
• Stops wobbling or loose movement caused by worn or broken handle mounting points
• Restores the refrigerator's finished appearance when the original handle is scratched or chipped

• One replacement refrigerator door handle

• Basic hand tools required; most installs use screws or hidden fasteners—keep removed hardware for re-use if undamaged
• Support the door while removing or installing the handle to avoid stress on hinges or seals
• Do not overtighten fasteners; snug is sufficient to prevent cracking the handle
• Disconnect power only if required by your model's service instructions.