Lmv1765sb/00 Parts

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This microwave lamp holder secures the light bulb and provides the electrical connection, helping restore dependable lighting for cooking and checking food. Replace a cracked, heat-darkened, or loose socket to address a light that won't turn on or flickers.

• Holds and insulates the bulb while connecting it to the microwave's wiring
• Common symptoms include no light, flickering, intermittent operation, or visible burning/cracking of the socket
• Restores solid electrical contact so the light works with the door or light switch
• Direct replacement for a damaged or worn lamp holder on select units

• Disconnect power at the breaker or unplug the appliance before servicing; microwaves contain high-voltage components
• Access location varies by model; note wire positions, transfer wires to the new holder, and secure with the original mounting hardware
• Restore power and test the light before fully reassembling

The PCB Assembly, Main is an OEM part for LG microwaves. It is responsible for processing all functions and communication between components to operate the microwave. The PCB assembly receives input controls from the control panel and distributes output operations to regulate components like the magnetron, fan, and inverter. 

Symptoms of a bad PCB assembly can include thermal damage, electrical shorts, liquid spills, or surges that disrupt circuitry. 

Causes of a bad main board include failure due to normal aging over time, exposure to excess heat, water damage, power surges or manufacturing defects.

Symptoms of a bad PCB assembly include:

• Microwave not heating or functioning properly  
• Faulty or non-responsive control panel
• Repeated error codes displayed
• Buzzing or humming noises from within

This genuine LG replacement part provides dependable and compatible control for your microwave. It is also suitable for Sears/Kenmore microwaves containing LG mechanisms and components.

This fuse assembly replaces a blown thermal fuse to restore overheat protection and help a dryer heat safely. It's the direct-fit component used in the appliance's safety circuit to shut off power if temperatures get too high. What it does:

• Interrupts power when excessive heat is detected to prevent overheating or fire risk
• Stops heating when the thermal element fails or air flow is restricted
• Commonly used when the dryer won't heat or trips the house circuit
• Works as part of the appliance's safety/temperature control system

• Disconnect power before inspecting or replacing the fuse to avoid shock or injury
• Replace only with the exact part number to retain OEM safety ratings
• Handle with care; do not attempt repairs on wiring or connectors
• After replacement, test the appliance on a short cycle and monitor for normal operation

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This keypad controller assembly replaces a worn or unresponsive control panel keypad to restore reliable button input and cycle selection on compatible LG appliances. It provides the complete user-interface board used to send commands to the appliance control system. What it does:

• Registers button presses and relays user commands to the main control board
• Restores response when touch-buttons or mechanical keys stop working
• Can resolve intermittent or no-response control panel behavior
• Works as the integrated keypad and circuit assembly for the control panel

• Disconnect power to the appliance before starting any repair
• Handle the PCB and ribbon cable by edges and avoid static discharge
• Keep all fasteners and grounding wires for reinstallation; align ribbon connector fully before securing

This power control board assembly replaces the appliance's main power/control PCB to restore reliable power distribution and control logic. It helps the unit run cycles and respond correctly to user inputs when the original board fails. What it does:

• Regulates and distributes power to motors, valves, and user-interface components
• Processes control signals and runs programmed cycles for normal operation
• Can stop error-code-driven lockouts caused by a failed control board

• Disconnect all power (unplug or switch off breaker) before starting any work
• Take static-discharge precautions and handle the PCB by its edges
• Note connector locations and take photos before disconnecting wiring harnesses

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

The Microwave Mounting Hardware Kit is an OEM part for LG microwaves. This kit contains all of the necessary hardware to properly mount and install an LG microwave. It ensures that the microwave is securely fastened to the cabinet or installed above the range.

Causes of faulty mounting hardware include lack of proper installation, missing or lost pieces over time, or damage.

Symptoms of missing or damaged mounting hardware include:

• Microwave not sitting securely on the mounting plate or surface
• Movement or wobbling of the microwave during operation
• Risk of the microwave falling if not properly secured

This LG part is also compatible with some Kenmore models.

This is a complete replacement door assembly for select front-load washers. It restores a clear viewing window and proper latching so the machine can close and seal correctly after damage to the original door. What it does

• Replaces the entire outer door on compatible front-load washers
• Provides a rigid structure and window for safe operation and visibility
• Enables proper alignment with the door lock/strike for reliable closing
• Helps address leaks or operation issues caused by a cracked, warped, or broken door

• 1 complete door assembly

• Disconnect power before servicing; wait for moving parts to stop
• Support the door during removal/installation to protect the hinge area
• Handle glass carefully and protect the cabinet finish from scratches
• After installation, check door alignment and gasket contact for a proper seal

This replacement holder/locker secures the door latch assembly so the door stays aligned and closes reliably, allowing the appliance's safety interlocks to engage and the unit to operate as intended. What it does:

• Supports and holds the door latch/latch assembly in the correct position
• Helps keep the door aligned and firmly closed so safety switches can engage
• Can resolve symptoms like a door that won't stay closed, door rattling, or the appliance failing to start due to an incomplete door closure
• Matches OEM service-panel location and function for straightforward swap-out

• Disconnect power (unplug or shut off breaker) before beginning any work
• Access may require removing the outer cabinet or control panel per the appliance service instructions
• Handle door and latch components carefully to avoid misalignment or damage

This genuine replacement door handle restores a secure grip and makes opening your refrigerator easy and reliable. It replaces a cracked, loose or broken handle to return normal door operation and appearance. What it does:

• Replaces a damaged or cracked handle so the door opens and closes properly
• Provides a firm, ergonomic grip to prevent slips and accidental drops
• Stops wobbling or loose movement caused by worn or broken handle mounting points
• Restores the refrigerator's finished appearance when the original handle is scratched or chipped

• One replacement refrigerator door handle

• Basic hand tools required; most installs use screws or hidden fasteners—keep removed hardware for re-use if undamaged
• Support the door while removing or installing the handle to avoid stress on hinges or seals
• Do not overtighten fasteners; snug is sufficient to prevent cracking the handle
• Disconnect power only if required by your model's service instructions.

This high-limit thermostat monitors dryer temperature and helps stop the heating circuit if temperatures exceed safe levels, protecting the appliance and clothing from overheating. Replaces a faulty thermostat to restore proper temperature control. What it does:

• Opens the heating circuit at a preset temperature to prevent overheating
• Stops the heater when the dryer gets too hot, reducing fire risk
• Restores normal heating behavior when the thermostat is functioning correctly
• Commonly replaced when the dryer overheats, won't heat, or cycles irregularly

• Disconnect power before inspecting or replacing the thermostat
• Test for continuity with a multimeter to confirm failure before replacing
• Note wire locations or take a photo before removing connectors to ensure correct reassembly
• Check the heating element, thermal fuse, vents, and cycling thermostat if overheating or heating failures continue after replacement.