Lmv1765sb/00 Parts

This door interlock micro switch is part of the microwave's latch assembly. It detects when the door is fully closed so the oven only runs when latched, helping restore safe, consistent start/stop operation.

• Senses door-latch position within the interlock assembly
• Cuts power when the door opens; permits operation when fully closed
• Helps resolve "won't start" complaints or stopping when the door is jostled
• Often fixes the need to press or lift the door to keep the unit running

• Unplug the microwave before servicing; high-voltage components can retain a dangerous charge.
• Access the interlock/latch bracket behind the control panel; note switch orientation and terminal labels (COM, NO/NC).
• Transfer wires to the new switch, secure it in the bracket, and ensure the actuator aligns with the door latch.
• Reassemble and test with a cup of water to ensure proper start/stop operation.

This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.

• Monitors temperature at its mounting location inside the microwave
• Opens on overtemperature to interrupt power for safety
• Depending on model/location, a failed or open thermostat can cause no heat, the unit shutting off mid-cycle, or no power until it cools
• Helps prevent damage to the magnetron, cavity, and wiring due to overheating

• Unplug the microwave before service; the high-voltage capacitor can retain a dangerous charge
• Note wire positions, remove mounting screws, and install the new thermostat flat against the surface for proper heat sensing
• Reassemble and test; ensure vents and filters are clear to maintain proper airflow and prevent future overheating

This door frame assembly replaces the appliance's outer door trim and support to restore proper door fit and protect the inner door components. Ideal when the door frame is cracked, bent, or no longer secures the door evenly. What it does:

• Restores the outer door trim and structural support so the door closes and latches properly.
• Protects the door glass and inner components from impact and moisture intrusion.
• Helps eliminate gaps or misalignment that can cause rattling, air leaks, or difficulty closing the door.
• Matches the OEM form for a direct replacement when the original frame is damaged.

• Disconnect power and unplug the appliance before starting any repair.
• Remove the existing door trim/frame by loosening the retaining screws or clips; handle any glass carefully.
• Check door alignment and seal after installation; adjust hinge or strike as needed for proper fit.
• If the assembly has bonded or sealed components, consider replacing any associated gasket or fasteners if damaged.

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

Size: 5 inches x 7 3/4 inches.

This mechanical charcoal refrigerator filter helps reduce food and fridge odors for fresher-smelling compartments. It's a direct-fit replacement that restores odor-absorbing capability so your fridge interior smells cleaner. What it does

• Adsorbs and traps common food and household odors to reduce smells in the fridge
• Helps prevent odor transfer between compartments and stored foods
• Restores the intended odor-control function when the original filter is spent or clogged
• Works as a simple replaceable cartridge in compatible LG refrigerator filter housings

• One mechanical charcoal refrigerator filter cartridge

• High-level replacement: remove the old filter cartridge and snap or twist the new cartridge into the filter housing per the refrigerator manual
• Follow the refrigerator manufacturer's instructions for alignment and secure seating to avoid leaks or loss of function
• Disconnect power or follow any appliance-specific safety steps recommended by the manufacturer before servicing
• Dispose of the used filter per local regulations for household waste

This is a complete replacement door assembly for select front-load washers. It restores a clear viewing window and proper latching so the machine can close and seal correctly after damage to the original door. What it does

• Replaces the entire outer door on compatible front-load washers
• Provides a rigid structure and window for safe operation and visibility
• Enables proper alignment with the door lock/strike for reliable closing
• Helps address leaks or operation issues caused by a cracked, warped, or broken door

• 1 complete door assembly

• Disconnect power before servicing; wait for moving parts to stop
• Support the door during removal/installation to protect the hinge area
• Handle glass carefully and protect the cabinet finish from scratches
• After installation, check door alignment and gasket contact for a proper seal

A direct-replacement power cord assembly that restores a secure electrical connection to the appliance. Replaces a damaged or worn cord to help regain reliable power and reduce risk of arcing or intermittent operation. What it does:

• Provides the appliance's main AC power connection to the household outlet.
• Replaces frayed, cracked, or burned cords that can cause intermittent power or complete loss of power.
• Helps eliminate loose-terminal or plug issues that can cause sparking or a burning smell.
• Ensures proper fit and routing when the correct cord and terminals are used for the appliance.

• One power cord assembly.

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Route the cord away from moving parts and heat sources; secure strain relief or clamp per the appliance cabinet.

This single wire harness routes power and signals between an appliance's internal components to restore reliable electrical connections. It replaces a damaged or worn harness to help re-establish proper circuit continuity and component control. What it does:

• Carries power and control signals between control board and components
• Restores continuity when wiring is damaged, frayed, or has broken connectors
• Can resolve symptoms such as no power to a component, intermittent operation, or related error codes
• Helps prevent shorting or arcing from exposed or compromised wiring

• Disconnect power to the appliance before beginning any repair
• Take photos of original routing and connector positions to ensure correct reinstallation
• Replace only the harness shown; match connector shapes and pin counts before connecting
• Route and secure the harness away from sharp edges, moving parts, and heat sources

This single wiring harness routes power and signals between components to restore electrical connections and enable normal appliance operation. It replaces a damaged or broken harness to help fix intermittent power, control failures, or no-start conditions. What it does:

• Reconnects power and signal circuits between control boards, sensors, and motors
• Restores reliable electrical continuity where chafed, burned, or broken wires cause faults
• Commonly used to address intermittent operation, loss of power to components, or control-panel unresponsiveness
• Matches OEM connector types and wire lengths for straightforward replacement when specified

• One single wiring harness as shown

• Disconnect power (unplug appliance or turn off breaker) before starting any repair
• Handle connectors by the housing; avoid pulling on wires to prevent damage
• Verify connector orientation and secure all plugs; route and secure harness away from moving parts and heat sources