Lmv2931bd Parts

Size: 5 inches x 7 3/4 inches.

This fan assembly replaces the oven/range cooling blower to restore proper airflow and help prevent overheating of control electronics. It's a direct-fit assembly designed to replace a failed or noisy blower unit. What it does:

• Circulates air to cool control components and maintain safe operating temperatures
• Replaces worn or failed blower motor that won't start or runs intermittently
• Restores airflow when the appliance is running hot or control board overheats
• Reduces rattling or grinding noise caused by a damaged fan or housing

• Turn off power to the appliance at the breaker before starting any repairs
• Inspect mounting points and wiring harness for damage; replace connectors if frayed
• Follow OEM service manual for removal and reinstallation torque and routing

This replacement lamp assembly restores interior illumination so you can see the appliance cavity clearly and safely. It fits the original mounting and electrical connections for a direct swap. What it does

• Replaces a burned-out, flickering, or dim interior lamp so you can inspect food and parts easily
• Provides the correct shape and connector to match the appliance's original lamp location and mounting
• Helps eliminate intermittent lighting caused by a damaged lamp or failed lamp connection
• Restores normal light output for safe loading and unloading

• Disconnect power to the appliance before starting any repair
• Allow the appliance and old lamp to cool completely before handling
• Handle the lamp by its base or use gloves to avoid oil contamination on the bulb
• Follow the appliance's service manual or OEM diagram for correct removal and installation

This replacement fuse assembly protects the appliance's power circuit by opening when an overcurrent or short occurs. Installing a new fuse assembly after a failure helps restore power and safeguard sensitive wiring and electronics. What it does:

• Interrupts electrical flow if current exceeds a safe threshold
• Helps protect wiring, control boards, and other components from damage
• Common symptoms: appliance completely dead/no lights, won't start or respond to controls, fuse tests open or repeatedly blows

• 1 fuse assembly

• Disconnect power at the breaker before servicing; verify zero voltage before touching wiring
• Match the exact part number and electrical rating specified for your model—do not upsize a fuse
• Identify and correct the underlying cause of the blown fuse (shorted component, pinched wire) before restoring power
• Some appliances contain capacitors that can hold a charge; follow the service manual to discharge if applicable

This replacement holder/locker secures the door latch assembly so the door stays aligned and closes reliably, allowing the appliance's safety interlocks to engage and the unit to operate as intended. What it does:

• Supports and holds the door latch/latch assembly in the correct position
• Helps keep the door aligned and firmly closed so safety switches can engage
• Can resolve symptoms like a door that won't stay closed, door rattling, or the appliance failing to start due to an incomplete door closure
• Matches OEM service-panel location and function for straightforward swap-out

• Disconnect power (unplug or shut off breaker) before beginning any work
• Access may require removing the outer cabinet or control panel per the appliance service instructions
• Handle door and latch components carefully to avoid misalignment or damage

This resin cover protects internal components by shielding them from debris, moisture and accidental contact. It helps maintain safe operation and prevents damage to wiring and nearby parts when in good condition. What it does:

• Shields control components and wiring from dust, spills and physical contact
• Maintains correct component spacing and mounting alignment inside the appliance
• Reduces vibration noise caused by loose or damaged covers
• Replace if cracked, broken, warped or missing to prevent exposure and potential damage

• Disconnect power and unplug the appliance before starting any repair
• Handle part carefully to avoid cracking; use appropriate fasteners as originally installed
• Verify correct orientation and secure mounting to restore original protection

A flat washer used with the appliance's fastening hardware to distribute load and reduce wear. Helps maintain secure connections and prevents damage to mating surfaces for reliable operation. What it does:

• Provides an even bearing surface for bolts or screws to prevent pull-through
• Reduces friction and wear between fasteners and housing parts
• Helps keep fasteners tight and resists loosening from vibration
• Commonly used where a smooth, protective spacer is needed

• Verify correct location and orientation before reassembly
• Use manufacturer-recommended fasteners and torque specifications
• Power off and unplug the appliance before accessing internal components

This door frame assembly replaces a damaged or warped outer door frame to restore proper fit and finish. It re-establishes a stable support for the door and helps the appliance close and seal correctly. What it does

• Provides the structural outer frame that supports the door and inner components.
• Restores correct door alignment and reduces gaps that can cause rattling or poor closure.
• Helps prevent debris and moisture from entering the door cavity.
• Useful when the existing frame is cracked, bent, or cosmetically damaged.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle any glass or trim pieces carefully to avoid breakage or injury.
• Replacement typically requires removing the door from its hinges and detaching exterior trim; keep fasteners organized.

A sheet-metal tapping screw used to fasten appliance panels and components where a self-threading fastener is needed. Replaces stripped or missing screws to restore secure fits and reduce rattling or loose trim. What it does

• Threads into thin metal or plastic mounting points to secure panels, brackets, and trim
• Commonly used where pre-formed threads are not available
• Helps stop vibrating or loose panels that cause noise or alignment issues
• Designed to grab and form threads as it's driven in for a tight hold

• Tapping screw

• Use the correct screwdriver bit to avoid cam-out or head damage
• Start straight and drive slowly until snug; avoid over-tightening which can strip or crack mounting material
• Disconnect power and remove nearby wiring or components as needed for safe access
• Wear eye protection when working with small fasteners and metal panels

This is a complete outer door assembly that restores the refrigerator's front appearance and allows the door to open and close securely. It replaces a damaged or dented outer door to refresh function and cosmetic finish. What it does:

• Replaces a bent, dented, or cosmetically damaged outer door to restore appearance
• Provides the structural mounting surface for the handle, trim, and hinge hardware
• Ensures the door closes properly so internal temperature control can function as designed
• Helps prevent drafts and moisture intrusion at the cabinet opening when aligned correctly

• Disconnect power to the appliance before starting any work
• This heavy panel may require two people to safely handle and align
• Remove and retain original fasteners/hinges unless new hardware is explicitly included
• Adjust hinge screws as needed

A direct-replacement power cord assembly that restores a secure electrical connection to the appliance. Replaces a damaged or worn cord to help regain reliable power and reduce risk of arcing or intermittent operation. What it does:

• Provides the appliance's main AC power connection to the household outlet.
• Replaces frayed, cracked, or burned cords that can cause intermittent power or complete loss of power.
• Helps eliminate loose-terminal or plug issues that can cause sparking or a burning smell.
• Ensures proper fit and routing when the correct cord and terminals are used for the appliance.

• One power cord assembly.

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Route the cord away from moving parts and heat sources; secure strain relief or clamp per the appliance cabinet.