Lmxs26726s Parts

This is the fan grille assembly for the refrigerator compartment. It covers and guides airflow around the evaporator fan, protecting the fan and helping direct cold air for consistent cooling performance.

• Protects the evaporator fan and improves airflow through the compartment
• Helps maintain even temperatures by channeling air where it's needed
• Replaces cracked, warped, or broken covers that can rattle or interfere with the fan
• Common symptoms include rattling noises, obstructed fan blades, or visible damage to the cover

• Disconnect power to the refrigerator before servicing
• Remove shelves/drawers for access; retain and reuse original fasteners
• Transfer any reusable components from the original cover if applicable
• Seat the grille fully and ensure the fan spins freely before reassembly and power-up

Door switch magnet for reed switch

This cover assembly replaces the rear outer panel that protects a TV's internal components and helps maintain proper airflow and appearance. It restores a secure enclosure and prevents dust and accidental contact with electronics. What it does:

• Shields internal circuit boards, power supply, and connectors from dust, debris, and impact
• Helps maintain designed ventilation pathways to reduce overheating risk
• Restores the TV's finished appearance and secures internal components
• Addresses symptoms such as loose or missing back panel, exposed internals, or rattling chassis

• One TV rear cover assembly

• Disconnect power and unplug the TV before starting any repair
• Handle the cover carefully to avoid bending tabs or scratching the finish
• Use original screws and retainers; fastener locations before tightening

Display Cover Assembly with controls.

This LED assembly is a backlight strip used to illuminate the display for clear, even picture brightness. Replacing a faulty strip restores proper screen illumination and can eliminate dark spots or missing segments. What it does:

• Provides the LED illumination source behind the LCD panel for even brightness
• Restores lost or uneven backlighting caused by failed LEDs or damaged strips
• Commonly replaces parts that cause dimming, flickering, or no light on power-up
• Connects to the display's LED driver board to receive power and signals

• Disconnect power and remove the display panel before replacing
• Handle the strip and connector carefully to avoid bending or damaging LEDs and flex cables
• Observe ESD precautions and avoid touching LED surfaces or circuit traces
• Reassemble panels and test before finalizing to ensure proper alignment and function

This button assembly replaces the set of push buttons on the appliance control panel to restore reliable input and a finished appearance. Replaces worn, broken, or unresponsive control buttons so the unit accepts user commands correctly. What it does:

• Provides the user-facing push buttons used to select cycles, options, and start/stop functions
• Restores physical button action for hard-to-press, stuck, or missing buttons
• Helps resolve intermittent or non-responsive control inputs caused by damaged button hardware
• Maintains the original fit and appearance of the control panel

• One button assembly

• Disconnect power before beginning any repair
• Access typically requires removing the control console or top panel—keep fasteners and clips organized
• Handle the assembly carefully to avoid damaging plastic tabs or button contacts
• Test button operation before fully reassembling the console

The Cover Assembly, Display is an OEM replacement part for LG refrigerators. As the interactive interface between the user and refrigerator, the display cover assembly aids the navigation of settings and provides important information such as temperature readings, alarms, and cycle statuses.

Causes of a bad display cover assembly can include cracks, scratches or damage to the tough material from accidental impacts over time. The thin film coatings and integrated circuit boards are also susceptible to faults and malfunction.

Symptoms of a bad display cover assembly include:

• Unresponsive or glitchy touch controls  
• Faulty or inaccurate temperature displays
• Inoperative dispensing functions
• Blind spots or discoloration on the screen

This OEM LG part is also compatible with select Sears/Kenmore models

This freezer door foam assembly replaces the insulation layer inside a freezer door to help restore proper temperature control and reduce condensation. It fits into the inner door cavity to improve cold retention and door performance. What it does:

• Replaces deteriorated or waterlogged door insulation that can lead to warm spots
• Helps reduce frost or ice buildup inside the freezer by restoring proper insulation
• Limits condensation and moisture between door panels that can cause odors or corrosion
• Supports overall temperature stability for better freezer efficiency

• One freezer door foam assembly

• Disconnect power before servicing and work on a dry, level surface
• Remove the inner door panel to access the foam; keep fasteners and clips organized
• Insert foam carefully to avoid tearing; align with locating features in the door cavity
• If the door uses adhesive or retention clips, reuse original hardware or OEM-recommended replacements

This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:

• Secures and aligns internal TV modules or boards to the cabinet
• Prevents rubbing, vibration noise, and intermittent contact from loose parts
• Helps keep the display and internal assemblies correctly spaced for reliable operation
• Useful when cracked, warped, or broken guides cause misalignment or rattling

• One guide assembly as shown

• Unplug the TV and remove power/antenna cables before starting
• Ground yourself to protect against static-sensitive components
• Use original screws and fasteners; inspect adjacent tabs and mounts for damage during installation

This upper hinge assembly secures and guides the refrigerator door at the top, restoring proper alignment and smooth opening. Replace a worn hinge to stop sagging doors and improve sealing and operation. What it does:

• Provides the top pivot point for the refrigerator door, keeping it aligned during opening and closing
• Restores proper door clearance and prevents rubbing or misalignment
• Helps maintain a tight door seal to reduce cold air loss
• Addresses symptoms like a sagging or uneven door, noisy movement, or difficulty closing

• Disconnect power to the appliance before beginning repairs to prevent injury.
• Support the door while removing and installing the hinge to avoid dropping or damage.
• Use appropriate hand tools; do not overtighten fasteners to prevent stripping.

This LED assembly restores backlight illumination for compatible LG displays, improving screen brightness and uniformity so images look clearer and easier to see. It replaces a worn or failed backlight strip. What it does:

• Provides the backlight illumination that lights the LCD panel
• Restores overall brightness and reduces dark or dim areas
• Can stop flickering or intermittent light if LEDs are failing
• Helps eliminate uneven lighting or bright/dark bands across the screen

• One LED assembly (single backlight strip) as shown

• Disconnect power and allow capacitors to discharge before starting
• Handle the LED strip and circuit board by the edges; avoid touching LED surfaces and PCB traces
• Keep track of screws and clips; test the display before fully reassembling

The PCB Assembly, Main is an OEM part specifically designed for LG refrigerator units. It acts as the central control, regulating temperature, humidity levels, ice/water dispensing, and all integrated features.  

Causes of a bad PCB Assembly, Main can include water damage, power surges, or normal circuit degradation over time. High-functioning PCBs require robust protection.

Symptoms of a bad PCB Assembly, Main include:

• Inaccurate or inconsistent temperatures in compartments  
• Malfunctions with the ice/water dispenser
• Failure of brightness/display controls  
• Unfamiliar noises coming from internal components

Replacing with this genuine LG board restores full cooling efficiency and extends refrigerator reliability. This LG replacement part is also compatible with Sears/Kenmore.

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary

This funnel assembly directs detergent and rinse aid from the dispenser into the dishwasher wash chamber for proper cleaning. Replaces a cracked or clogged funnel to restore reliable dispensing and reduce leaks or pooling. What it does:

• Channels detergent and rinse aid from the dispenser to the wash chamber for even distribution
• Prevents splash-back and reduces the chance of detergent clumping or not reaching the wash arms
• Helps stop minor leaks or water pooling around the dispenser area when the original funnel is damaged
• Keeps the dispenser pathway clear so the detergent dissolves and dispenses as intended

• One replacement funnel assembly

• Disconnect power to the appliance before starting any repair
• Turn off the water supply and drain standing water from the unit if applicable
• Remove the dispenser bezel or control panel per OEM instructions to access the funnel; handle plastic clips and tabs gently to avoid breakage
• After installation, run a short cycle to check for leaks

This inlet water valve assembly controls and directs incoming water to the appliance, restoring proper fill operation and water delivery. It replaces a worn or failed valve to help stop no-fill, slow-fill, or continuous-fill issues. What it does:

• Opens and closes supply passages to allow water into the appliance when needed
• Directs cold and/or hot water to the correct internal circuits
• Stops water flow when the fill cycle completes to prevent overfilling
• Faulty valves can cause no water, weak filling, or constant filling symptoms

• Disconnect power and turn off the water supply before starting any repair
• Handle inlet hoses and fittings carefully; check seals and replace gaskets if shown damaged
• Test for proper fill function and leaks after installation