Lmxs28596s /01 Parts

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

This display cover assembly replaces the damaged or faded clear panel that protects and frames the appliance control display, restoring a clean appearance and keeping the control area protected from dust and spills. What it does

• Protects the control board and display window from dust, moisture, and everyday wear
• Restores a clear viewing surface when the original cover is cracked, scratched, or discolored
• Helps maintain proper button alignment and cosmetic finish on the control console
• Keeps controls visible and reduces risk of debris interfering with buttons or touch controls

• One cover assembly (display) as shown

• Disconnect power to the appliance before beginning any work
• Remove any trim or bezel panels covering the control area to access mounting screws or clips
• Handle the cover carefully to avoid scratching; use non-marring tools to release clips

The Deli Drawer Front Cover is an OEM part for LG refrigerators. It provides an attractive facia that protects the internal components of the deli drawer. This cover is designed to integrate with the style and finish of the refrigerator interior. 

Symptoms of a bad Deli Drawer Front Cover include: 

• Cracks, chips, or other visible cosmetic damage
• Discoloration that detracts from the aesthetics  
• The cover is loose, misaligned, or missing
• Difficulty opening or closing the deli drawer

Causes of a bad cover can be normal wear and tear over time from repeated use, as well as accidental drops or impacts that cause cracks or breaks.

This OEM replacement part is also compatible with select LG models.

Restore a tight, reliable seal on your refrigerator door with this replacement gasket. A fresh gasket stops cold-air leaks that lead to frost, condensation, and temperature swings—helping your fridge run smoothly and keep food at the right temperature. What it does:

• Seals the gap between the door and cabinet to keep cold air in and warm air out
• Helps maintain consistent interior temperature and humidity
• Reduces frost and condensation around the door opening
• Common symptoms: torn or warped gasket, door not closing flush, moisture at the seal, frost buildup, or the unit running more than usual

• 1 door gasket

• Disconnect power before starting and clear items from the door
• Lay the new gasket flat and gently warm it (hot water or low-heat hair dryer) to relax folds
• Starting at the corners, press the gasket lip fully into the door channel and work evenly around
• Perform a paper-slip test around the perimeter and adjust door alignment if needed; avoid overheating the gasket

The Filter Head Assembly is an OEM replacement part for LG French door refrigerators. The component that houses the built-in water filter responsible for cleaning water delivered through the refrigerator’s internal dispenser and ice maker. With its precise fit, the filter head assembly ensures the water filter is securely held in place to do its job properly.

Symptoms of a bad filter head assembly include:  

• Water dispensing or ice making issues
• Water leaks around the filter area  
• Error messages related to filter replacement
• Inability to change or install a new filter

Causes of failure can be cracks, cracks, mineral buildup, or normal wear over time. Filter head assemblies in continuous use may need periodic replacement.

This OEM part is also compatible with some Kenmore side-by-side refrigerators.

The Evaporator Fan Blade is an OEM replacement part for LG refrigerators. It is a key component located inside the refrigerator that works to circulate cold air evenly throughout. The fan blade spins rapidly to distribute chilled air from the evaporator coil and refrigeration system, ensuring proper airflow and consistent temperatures across all shelves and compartments.  

Symptoms of a bad evaporator fan blade include:

• Inconsistent or improper interior cooling temperatures 
• Hot or warm spots developing inside the refrigerator
• Strange noises such as clicking or grinding emanating from the rear wall

Causes of a bad evaporator fan blade can be wear and tear over time, an accumulation of dust or debris on the blades restricting airflow, or accidental damage like dents or cracks to the blades affecting their ability to spin smoothly.

This OEM LG part is also compatible with select Sears/Kenmore brand models.

The refrigerator door gasket seals the gap between the door and cabinet to keep cold air in and humid air out, helping maintain temperature, reduce frost and condensation, and restore a tight, reliable door close.

• Creates an airtight perimeter seal to prevent warm air leaks
• Helps stabilize interior temperature and humidity
• Minimizes frost buildup and condensation around the door
• Common symptoms: torn or deformed seal, door not sealing, moisture/frost near door, rising temps

What's included: 1 door gasket Installation notes:

• Disconnect power before servicing
• Allow the new gasket to warm to room temperature; soften in warm water or with gentle, low heat to relax folds
• Remove the old gasket and thoroughly clean the mounting channel/mating surfaces
• Seat the new gasket starting at the corners, then along the sides; ensure it's fully engaged and even all around, and check door alignment/seal

Replacement door gasket that seals the refrigerator door to help keep cold air in and warm air out, reducing frost and cold-air leaks and helping the appliance maintain consistent internal temperatures for food preservation. What it does:

• Creates an airtight seal around the refrigerator door to minimize cold-air loss
• Helps prevent frost buildup in the fresh-food compartment and freezer-adjacent areas
• Addresses symptoms like visible cracks, tears, gaps, or cold air escaping from the door edges
• Helps the fridge maintain set temperatures and can reduce the workload on the cooling system

• Disconnect power to the appliance before starting any repair
• Remove the old gasket fully and clean the door channel to ensure a proper new seal
• Press the new gasket into the channel evenly, working around the perimeter and checking for full contact
• After installation, close the door and inspect the seal; allow a short settling period and re-check for gaps

This ice dispenser assembly replaces the dispenser mechanism in compatible LG refrigerator doors, restoring smooth ice delivery and helping stop jams or broken chutes so your dispenser works reliably again. What it does:

• Channels ice from the freezer bin through the door to the dispenser chute.
• Activates the dispenser mechanism to release ice when the paddle/lever is pressed.
• Common symptom fixes: ice not dispensing, ice jams, cracked or damaged chute, or loose/disconnected dispenser components.
• Helps restore normal dispenser operation without replacing the entire door assembly.

• Disconnect power to the refrigerator before beginning any repair.
• Access typically requires removing the refrigerator door panel/liner and disconnecting the dispenser harness; follow the OEM service manual for procedure.
• Handle plastic chute components carefully to avoid cracking; check connector seating and alignment during reassembly.
• Test dispenser function after reinstalling the panel.

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

Replacement refrigerator door basket that restores usable storage on the door and keeps bottles, jars and condiments secure. Molded plastic design replaces a cracked or broken bin so items stay organized and won't fall when the door opens. What it does

• Provides a shelf on the refrigerator door to hold bottles, jars and small containers
• Replaces cracked, chipped or warped door bins that no longer secure items
• Helps prevent spills and shifting items when opening or closing the door
• Use only on compatible models; fit with your model number before ordering

• Remove all items from the door and lift or slide out the old basket
• Install the new basket by aligning tabs/runners and snapping it into place; do not force
• Inspect mounting tabs—if damaged, replacement may require additional clips
• Dispose of broken plastic pieces carefully and keep children away during replacement

The Water Valve is an OEM component specifically designed for LG refrigerators equipped with internal dispensers. Located inside the refrigerator wall, this valve regulates water flow to the dispenser spigot on demand. Through precise operation, it provides consistently refreshed chilled water.  

Causes of a bad water valve can include mineral buildup restricting flow passages over time, or physical damage disrupting seals.

Symptoms of a bad water valve include:

• No water was dispensed from the spout
• Leaks in the refrigerator compartment 
• Foreign odors emitted around the valve area

This authentic LG valve restores the dispenser function, delivering clean water efficiently. Its self-closing design helps prevent leaks when not in use. Replace to satisfy LG quality and support luxury features like internal filtration performing dependably for years.

This OEM LG part also fits select Kenmore refrigerator models using LG-developed components and controls for a premium user experience.
 

This is a refrigerator shelf assembly that provides a stable, easy-to-clean surface for storing food and organizing items inside the fresh food compartment. Replacing a damaged or missing shelf restores usable space and proper support.

• Supports food items and containers on a rigid, flat surface
• Helps maintain organized storage and visibility in the compartment
• Replace if the glass is cracked, frame is broken, or shelf sags/doesn't seat properly
• Can also address rattling or instability from a warped or damaged shelf

• Unplug the appliance or disconnect power before servicing
• Remove contents and carefully lift out the old shelf
• Align the new shelf with the side rails and fully seat it in the supports
• Handle glass with care; avoid impact and uneven pressure during installation

The Main PCB Assembly is an OEM part for LG refrigerators. As the central control board, it directs functions like cooling performance, temperature regulation and dispenser operations. Located inside the back wall of the fridge compartment, the main PCB houses electronic components and circuitry that facilitate smooth appliance operation.

Causes can be water damage from condensation leaks, moisture penetration over time or normal wear of electronic systems.

Symptoms of a bad main PCB include:

• Inaccurate or unstable interior temperatures
• Improper functioning of cooling systems like fans or compressors
• Issues with ice/water dispensing processes
• Error codes displayed

This OEM LG part is also compatible with some Kenmore models.

This door basket is the refrigerator door bin that mounts on the inner door panel. Replacing a cracked, loose, or missing bin restores safe, organized storage for bottles, condiments, and other small items on your refrigerator door.

• Provides stable door storage for condiments, beverages, and small items
• Attaches to molded tabs/rails on the door liner
• Restores capacity and organization when the original bin is damaged or missing
• Common symptoms: bin falls off, won't stay seated, wobbles, or is cracked

• Remove contents, then lift the old bin straight up to release from the door tabs
• Align the new bin with the door rails/tabs and press down until fully seated
• Handle plastic at room temperature and avoid forcing to prevent cracking
• Confirm secure engagement before reloading items

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.