Lmxs28996d Parts

This customized replacement screw secures appliance components and restores proper fit and function. It's a direct-fit fastener designed for use where the OEM specifies a tailored screw to replace a worn, stripped, or missing fastener. What it does

• Fastens panels, brackets, or assemblies that use a manufacturer-specified customized screw
• Stops rattling or loose parts caused by worn or missing hardware
• Restores secure mounting for affected components
• Matches the OEM shape and thread pattern to prevent damage when used as directed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand initially, then tighten snugly—do not overtighten to avoid thread damage
• Keep removed hardware organized so you replace parts in their original locations

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This door magnet is the magnetic gasket strip that helps the door close securely and maintain an airtight seal, improving cooling efficiency and preventing leaks or temperature loss. What it does:

• Restores the magnetic attraction in the door seal so the door stays closed
• Helps maintain proper internal temperature by providing an airtight seal
• Reduces frosting, condensation, and energy waste caused by a weak or damaged seal
• Common symptom: door not sealing or closing firmly

• Disconnect power to the appliance before starting any repair
• Remove the door gasket or trim per the service manual to access the magnet strip
• Press or seat the magnet strip into the gasket channel; some models may require adhesive or fasteners—refer to OEM instructions

This overload protector is a compressor safety device that helps stop the compressor if it draws too much current or overheats, preventing damage and helping the refrigerator system run safely. What it does:

• Interrupts compressor power during excessive current draw or overheating to protect the compressor motor
• Can prevent short cycling and repeated restart attempts that damage the compressor
• Commonly replaced when compressor hums but will not start, or when the appliance stops cooling due to compressor protection
• Works as part of the compressor start/protection assembly alongside the start relay and capacitor

• Disconnect power to the appliance before accessing the compressor or electrical components
• Handle terminals carefully and reconnect to the matching terminals only; do not modify leads
• Verify the part number against the existing component before installation

This cover assembly protects a control board's printed circuit board (PCB) by shielding it from dust, moisture, and accidental contact. It helps keep the PCB secured and reduces the chance of shorting or damage during normal use. What it does:

• Shields the PCB from dirt, splashes, and foreign objects that can cause shorts or corrosion
• Secures the board in place to prevent movement and stress on connectors
• Helps maintain safe separation between live circuitry and user-accessible areas
• Reduces intermittent electrical issues caused by debris or loose components

• Always disconnect power to the appliance before starting any repair
• Handle the PCB and cover with care to avoid static discharge; use proper ESD precautions if available
• Align the cover to the board and fasten using the existing mounting points; do not overtighten screws
• After installation, restore power and verify normal operation

This hinge cover assembly replaces a damaged or missing hinge trim to protect the hinge mechanism and restore the appliance's finished appearance. It snaps into place over the hinge area for a clean, secure fit. What it does

• Covers and protects the hinge mechanism from dirt and debris.
• Restores the appliance's finished appearance when the original cover is cracked or broken.
• Helps prevent accidental contact with moving hinge parts.
• Common symptom: visible broken or missing hinge trim exposing the hinge.

• One hinge cover assembly.

• Disconnect power (and water, if appliance type requires) before starting any repair.
• Remove any outer panels or trim as needed to access the hinge per the appliance service instructions.
• Handle plastic trim pieces carefully to avoid cracking during removal/installation.

This tray cover assembly replaces a damaged or missing lid that protects and contains the appliance tray, restoring proper coverage and helping keep contents secure. It's a direct-fit replacement designed for straightforward swap-out. What it does:

• Covers and protects the tray to help prevent spills and contamination.
• Restores proper alignment and fit for trays that won't seat fully without the cover.
• Reduces stray debris from entering the tray area.
• Commonly replaces cracked, warped, or broken covers that impair function.

• Power off and unplug the appliance before starting any repair.
• Remove any items from the tray area and work on a clean, flat surface.
• Gently unclip or lift the old cover (retain any small clips or fasteners) and snap the new cover into place until fully seated.
• If any clips or adjacent parts are damaged, replace them before use; do not force the part into position.

This freezer door foam assembly is the insulating panel that fits inside the freezer door to help maintain proper cold temperatures and reduce frost buildup. Replacing damaged or compressed foam restores the door's thermal barrier and helps the compartment run more efficiently. What it does:

• Replaces worn, torn, or compressed insulation inside the freezer door
• Restores the door's thermal barrier to reduce heat transfer and frost accumulation
• Helps the freezer maintain stable internal temperatures for better food preservation
• Can reduce cycling frequency by improving overall insulation performance

• One freezer door foam assembly

• Disconnect power to the appliance before beginning any service
• Typically accessed by removing the freezer door liner; handle the foam carefully to avoid tearing
• Re-seat into the door cavity or clips as original; ensure an even fit against the liner

This insulating foam assembly fits inside the freezer door to restore core insulation and help maintain proper internal temperature. Replacing damaged or compressed door foam can reduce frost buildup and improve cooling efficiency. What it does:

• Replaces the factory foam core inside the freezer door to restore thermal insulation.
• Helps reduce frost and ice buildup by improving the door's insulation performance.
• Supports consistent freezer temperatures that can prevent food spoilage.
• Addresses symptoms such as excessive frost, long run times, or warm/freezing temperature fluctuations.

• Install with care to avoid damaging the door liner or gasket; follow OEM disassembly instructions.
• Disconnect power to the appliance before beginning service to avoid electrical hazards.

This door foam assembly replaces the inner insulation inside a refrigerator door to help restore thermal performance and reduce condensation. Fits behind the interior door panel to improve temperature retention and efficiency. What it does:

• Replaces damaged or compressed foam that can allow cold air to escape
• Helps reduce interior door condensation and frost buildup
• Restores even cooling and can prevent warm spots near the door
• Works with door panel and gasket to maintain proper insulation

• One door foam assembly

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the interior door panel and any trim or hardware
• Handle foam gently; avoid tearing and ensure proper positioning before reassembling the panel

This refrigerator door foam assembly restores the insulating core inside the door to help reduce heat transfer and maintain cabinet temperature. Replacing a damaged or compressed foam assembly can improve cooling consistency and reduce frost or condensation on the door. What it does:

• Replaces the insulating foam core inside the refrigerator door to help preserve cold air and energy efficiency.
• Helps eliminate cold spots, condensation, or frosting that can occur when door insulation is damaged or compressed.
• Provides structural support behind the door liner to keep shelves and components aligned.
• Reduces audible rattles or vibration caused by loose or missing insulation.

• One refrigerator door foam assembly.

• Disconnect power to the appliance before starting work to prevent electrical shock.
• Access typically requires removing the door liner or inner panel; retain all fasteners and gaskets for reassembly.
• Handle the foam and inner liner carefully to avoid tearing the liner or damaging door seals.
• If you encounter wiring, lights, or switches behind the liner, disconnect connectors gently and note their locations for correct reconnection.

This door foam assembly replaces the insulation inside a refrigerator door to help maintain internal temperatures and reduce condensation. It restores proper door insulation for improved cooling efficiency and consistent food preservation. What it does:

• Replaces worn or damaged foam insulation inside the refrigerator door to help minimize cold air loss.
• Helps reduce condensation and frost buildup along the door interior and gasket area.
• Supports overall temperature stability for better cooling performance.
• Useful when door panels are removed for repair, dent repair, or after water damage.

• Intended for installation behind the refrigerator door interior panel; panel removal may be required.
• Use basic hand tools; retain all screws and clips removed during disassembly.
• Disconnect power or follow manufacturer safety guidance if working near electrical components.