Lmxs30746s00 Parts

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

Restore a tight door seal and stop air leaks. This door gasket assembly forms the perimeter seal around the cabinet opening, helping maintain correct temperatures, reduce frost and condensation, and support efficient operation.

• Creates an airtight seal between the door and cabinet to keep conditioned air in
• Helps maintain stable internal temperatures and humidity
• Reduces frost/ice buildup and condensation around the door area
• Common symptoms of a failed gasket include tears, warping, gaps, doors not closing fully, moisture inside, or longer run times

• Disconnect power before servicing the appliance
• Let the new gasket warm and relax (room temperature or warm water); use low heat only if needed to smooth folds
• Start at the corners and press the gasket lip fully into the door's retainer channel, working evenly around
• Adjust door alignment if needed and allow time for the gasket to conform

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

Restore a tight, reliable seal on your refrigerator door with this Door Gasket Assembly. Replacing a worn or damaged gasket helps the unit hold temperature, reduce energy loss, and minimize condensation and frost around the door opening. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain stable internal temperatures and efficiency
• Reduces moisture/condensation around the door area
• Limits frost or ice buildup caused by air leaks
• Common symptoms include tears, gaps, hardening, or a door not closing flush

• 1 door gasket assembly

• Unplug the refrigerator and clear door bins for easier access
• Let the new gasket relax flat; warm gently with a hair dryer or warm water to smooth kinks
• Press the gasket fully into the retainer/channel, starting at the corners and working evenly
• Close the door and check the seal all around; allow up to 24 hours for the gasket to conform

A replacement heater sheath that protects and supports the dryer's heating element assembly, helping the unit heat safely and consistently. Fits specific LG dryer heater assemblies and restores proper heating performance when the original sheath is damaged. What it does:

• Encases and shields the heating element to prevent contact with other components
• Helps maintain correct airflow and consistent heat distribution in the dryer
• Can reduce arcing or shorting if the original sheath is cracked or worn
• Common symptom: dryer heats intermittently, trips thermal cutouts, or element contacts surrounding parts

• One heater sheath

• Intended for service technicians or experienced DIYers; follow the dryer's service manual
• Disconnect power (and gas if applicable) before starting any repairs
• Inspect the heating element and surrounding insulation for damage while replacing the sheath
• Replace mounting hardware and seals as needed; test the dryer for proper operation after reassembly

This harness assembly is the vehicle wiring connector that routes power and signals between the appliance control and components, restoring electrical connections for proper operation and control response. What it does:

• Carries power and control signals between the control board and components such as motors, sensors, valves or switches
• Reestablishes broken or damaged wiring paths that can cause intermittent operation, failure to start, or control errors
• Provides factory-matched connectors and wire lengths to maintain correct fit and reliable connections
• Helps eliminate issues caused by frayed wires, burnt contacts, or detached plugs

• Disconnect power (and water, if applicable) before starting any repair to avoid shock or injury
• Inspect connectors and mounting points; replace if pins are corroded or housings cracked
• Route harness along original clips and ties to avoid heat or pinch damage

This upper hinge assembly secures and guides the appliance door at the top, restoring correct door alignment and smooth opening. Replace a worn or damaged hinge to stop door sagging and improve sealing and operation. What it does:

• Supports the top of the door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly during opening and closing
• Prevents or corrects door sag, rubbing, or uneven gaps that can affect sealing
• Stops grinding, squeaking, or binding caused by a damaged hinge

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door while removing and installing the hinge to prevent dropping or injury
• Use basic hand tools; follow the appliance service manual for torque and alignment steps

This refrigerator shelf assembly provides a stable, easy-to-clean surface for storing food and containers in the fresh-food compartment. Replace a cracked, chipped, or missing shelf to restore usable storage and organization. What it does:

• Supports dishes, containers and groceries so items stay secure and level
• Restores storage space and helps prevent spills from reaching lower compartments
• Replaces cracked, chipped or missing shelves that can reduce usable space
• Matches OEM fit to slide into existing shelf tracks for straightforward placement

• Remove all items from the shelf and surrounding area before installing.
• Slide the shelf into the existing tracks until it seats; do not force or bend tracks.
• Use gloves and eye protection when handling glass to avoid cuts.
• If the shelf does not seat smoothly, check for obstructions or damaged tracks before applying pressure.

This shelf assembly replaces a broken or worn refrigerator glass shelf to restore sturdy, easy-to-clean storage space. The clear glass shelf supports food containers while maintaining proper airflow and visibility inside the fresh-food compartment. What it does:

• Replaces a damaged or cracked glass shelf to stop items from sliding or falling through gaps
• Provides a flat, stable surface for storing leftovers, produce, and containers
• Maintains proper spacing and airflow for even cooling in the fridge compartment
• Easy-to-clean glass surface resists stains and odors versus porous shelving

• Disconnect power to the appliance before starting any service to avoid injury
• Remove food and shelving above/below the area for safe access and alignment
• Slide the shelf into the existing track or support rails until it seats securely; do not force
• If any support rails or clips are damaged, replace them to ensure proper fit and safety

This replacement vegetable tray assembly restores the refrigerator's crisper storage area so fruits and vegetables sit securely and slide smoothly for easy access. It replaces a damaged, cracked, or missing crisper tray to regain usable storage space. What it does:

• Holds produce in the refrigerator's crisper area and helps prevent items from shifting or spilling
• Slides in and out on the crisper rails for convenient access to stored fruits and vegetables
• Restores proper fit and alignment when the original tray is cracked, broken, or warped
• Helps contain minor leaks and drips from produce and makes cleaning easier

• One vegetable tray assembly

• Remove all food and empty the crisper area before installation
• Slide old tray out and lift as needed to disengage; set new tray onto the crisper rails and test smooth operation
• Unplug the refrigerator or turn off power at the breaker if working near electrical components or lights
• Inspect rails and support brackets for damage or obstructions

This damper controls airflow between compartments to help maintain proper temperatures and consistent cooling. It replaces a worn or broken damper to restore normal airflow and temperature balance inside the appliance. What it does:

• Regulates air flow between compartments so the refrigerator can maintain set temperatures
• Helps reduce uneven cooling and temperature swings caused by a stuck or broken damper
• Works as part of the appliance's air distribution system to route cooled air where needed
• Common symptom: compartment temperature too warm or inconsistent airflow noise from the damper area

• One damper assembly

• High-level replacement; access usually requires removing interior panels or duct covers
• Disconnect power before any repair to avoid shock or injury
• Handle with care to avoid bending or damaging mounting tabs and linkage

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This vegetable tray assembly replaces the lower crisper pan so fruits and vegetables sit on a sturdy, easy-to-clean surface. Restores storage area support and helps keep produce contained for normal refrigerator use. What it does:

• Supports the crisper drawer and contents to prevent sagging or tipping
• Provides a smooth, washable surface that helps contain spills and debris
• Helps maintain organized produce storage by keeping items confined to the drawer area
• Commonly replaced when the tray is cracked, warped, or no longer secures the drawer

• Remove food and the crisper drawer before installing; handle glass/plastic parts carefully to avoid breakage
• Snap or slide the tray into the existing rails
• Wear gloves to protect hands from sharp edges; unplug the refrigerator only if accessing electrical components
• If the tray does not align, check the drawer slides and supports for damage before forcing installation

This replacement tray assembly restores the drawer's support and containment so stored items sit level and the drawer operates as intended. Designed to replace a cracked, warped, or damaged drawer tray. What it does:

• Provides a stable, molded surface for items stored inside the drawer
• Supports the drawer floor to help maintain proper alignment and seating
• Helps contain spills and direct moisture away from drawer slides
• Replaces trays with visible cracks, breaks, warping, or failed mounting tabs

• One tray assembly

• Remove contents and slide the drawer out before replacing the tray
• Inspect mounting tabs and rails for damage; replace any additional broken hardware as needed
• Use basic hand tools only; follow OEM instructions for proper seating and alignment
• Disconnect power only if required by your appliance model's service instructions