Lmxs307768/02 Parts

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

Restore organized, secure door storage. This replacement door bin/basket mounts on the refrigerator door to hold bottles, condiments, and small items so they stay contained, easy to reach, and off the main shelves. What it does

• Attaches to the refrigerator door to provide additional shelf storage
• Helps organize jars, bottles, and condiments for quick access
• Replace when cracked, warped, or with broken mounting tabs
• Symptoms include the bin falling off, not seating level, or items tipping/spilling

• One refrigerator door bin/basket

• Remove all items, then lift the old bin straight up to release from the door tabs
• Align the new bin with the mounting guides and press down until fully seated
• Verify it locks in place before loading; avoid overloading
• Handle plastic carefully; wear gloves if old parts have sharp edges

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

Restore a tight door seal and stop air leaks. This door gasket assembly forms the perimeter seal around the cabinet opening, helping maintain correct temperatures, reduce frost and condensation, and support efficient operation.

• Creates an airtight seal between the door and cabinet to keep conditioned air in
• Helps maintain stable internal temperatures and humidity
• Reduces frost/ice buildup and condensation around the door area
• Common symptoms of a failed gasket include tears, warping, gaps, doors not closing fully, moisture inside, or longer run times

• Disconnect power before servicing the appliance
• Let the new gasket warm and relax (room temperature or warm water); use low heat only if needed to smooth folds
• Start at the corners and press the gasket lip fully into the door's retainer channel, working evenly around
• Adjust door alignment if needed and allow time for the gasket to conform

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

This Door Stopper is the hinge-mounted stop that limits your refrigerator door's swing. Replacing a worn or broken stopper restores smooth, controlled movement and helps protect hinges and nearby cabinetry from overextension. What it does:

• Controls the door opening angle on the hinge to prevent overextending
• Helps maintain door alignment for a reliable seal and smooth closing
• Reduces clunking or clicking at the hinge caused by a worn stop
• Replace if the door swings too far, binds, won't close smoothly, or the stopper is cracked/missing

• 1 door stopper

• Disconnect power and support the door to relieve hinge load before service
• Remove hinge cover/fasteners as needed and note the old stopper's orientation
• Install the new stopper on the hinge/bracket, reassemble, and check door travel
• Verify the door seals fully and opens within the normal range

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

Restore a tight, reliable seal on your refrigerator door with this Door Gasket Assembly. Replacing a worn or damaged gasket helps the unit hold temperature, reduce energy loss, and minimize condensation and frost around the door opening. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain stable internal temperatures and efficiency
• Reduces moisture/condensation around the door area
• Limits frost or ice buildup caused by air leaks
• Common symptoms include tears, gaps, hardening, or a door not closing flush

• 1 door gasket assembly

• Unplug the refrigerator and clear door bins for easier access
• Let the new gasket relax flat; warm gently with a hair dryer or warm water to smooth kinks
• Press the gasket fully into the retainer/channel, starting at the corners and working evenly
• Close the door and check the seal all around; allow up to 24 hours for the gasket to conform

Restore the produce storage in your refrigerator with this vegetable tray assembly. It replaces a damaged or missing crisper so fruits and vegetables stay organized and the drawer slides correctly in its tracks for everyday use.

• Provides dedicated storage for fruits and vegetables in the fresh food compartment
• Slides in and out smoothly when properly seated on the crisper rails
• Replaces drawers that are cracked, warped, stained, or missing
• Can help resolve issues like jamming, falling off track, or not closing flush

• Remove all items from the old drawer before servicing
• Pull the drawer straight out to the stop, lift the front, and remove
• Inspect and clear any debris from the slides/rails before installing
• Align the rear of the new drawer on the rails and push straight in—do not force

This door basket replaces a damaged refrigerator door bin to restore secure storage for bottles, jars and small items. It keeps door contents organized and prevents items from falling when opening or closing the door. What it does:

• Holds bottles, jars and small containers on the refrigerator door for convenient access.
• Replaces cracked, chipped or broken door shelves that allow items to fall or shift.
• Restores a secure snap-fit when the original bin no longer stays attached to the door rails.
• Helps eliminate rattling or loose door storage caused by worn or damaged bins.

• Remove all items from the door shelf before replacing the basket.
• Lift the old basket up and out of the door rails (or tilt as needed) to remove.
• Align the new basket with the door rails and press until it snaps securely into place; tools are rarely required.
• Handle carefully and wear gloves if edges are sharp; verify fit before refilling.

This cover assembly is a molded exterior panel that shields and finishes the appliance. Replacing a cracked or missing cover restores proper fit and protection for internal components, and keeps the unit looking the way it should.

• Protects internal components by covering and sealing the opening
• Helps maintain proper alignment with adjacent parts and trim
• Reduces gaps where dust and debris can enter
• Common signs of failure: cracks, broken tabs, loose fit, rattling, or visible damage

• Disconnect power; for appliances with water connections, shut off the water supply
• Note screw locations and take photos before removal for reference
• Transfer any clips, gaskets, badges, or lenses from the original as needed
• Align tabs and mounting holes; snug fasteners without overtightening and confirm clearances before restoring power

A replacement vegetable tray assembly that restores the crisper drawer storage area so produce stays organized and contained. Fits into the lower refrigerator storage compartment to replace cracked, warped or missing trays. What it does:

• Provides a dedicated bin for storing fruits and vegetables to keep the compartment tidy
• Replaces cracked, broken, or warped trays that can leak or fail to hold items
• Slides into existing drawer rails for normal open/close operation
• Helps prevent produce from spilling onto lower shelves and improves usable storage space

• Remove all food from the drawer area before installing
• Slide out the old tray and align the new tray with existing rails; seat fully until it moves smoothly
• Handle edges carefully to avoid cuts from broken plastic; wear gloves if needed
• No electrical disconnection required, but unplug the appliance before performing other service

A replacement heater sheath that protects and supports the dryer's heating element assembly, helping the unit heat safely and consistently. Fits specific LG dryer heater assemblies and restores proper heating performance when the original sheath is damaged. What it does:

• Encases and shields the heating element to prevent contact with other components
• Helps maintain correct airflow and consistent heat distribution in the dryer
• Can reduce arcing or shorting if the original sheath is cracked or worn
• Common symptom: dryer heats intermittently, trips thermal cutouts, or element contacts surrounding parts

• One heater sheath

• Intended for service technicians or experienced DIYers; follow the dryer's service manual
• Disconnect power (and gas if applicable) before starting any repairs
• Inspect the heating element and surrounding insulation for damage while replacing the sheath
• Replace mounting hardware and seals as needed; test the dryer for proper operation after reassembly

This front plate assembly is the exterior trim piece that restores the appliance's front surface and protects internal components from dirt and damage. It improves appearance and helps maintain a proper seal and alignment. What it does:

• Replaces a cracked, dented, or missing front plate to restore the unit's exterior finish
• Shields controls and internal components from dust, spills, and everyday wear
• Helps maintain proper fit and alignment of adjacent panels and trim
• Returns the appliance to a finished, factory appearance

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removal of adjacent trim or the control bezel; keep all screws and fasteners for reinstallation.
• Handle the plate carefully to avoid scratching the finish during installation.

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore storage for fresh produce and help maintain proper organization in the refrigerator. Designed as a direct-fit replacement identified by the OEM part number. What it does:

• Holds fruits and vegetables to keep them separated from main shelves
• Slides on rails for easy access to stored produce
• Replaces cracked, chipped, or warped crisper trays that no longer seal or slide smoothly
• Restores proper fit and alignment within the refrigerator's drawer cavity

• Remove all food from the drawer area before beginning installation
• Lift out the old tray by disengaging the drawer from its rails; reverse to install the new tray
• Handle with care to avoid damage; inspect rails and catches for wear before reinstalling