Lmxs30776d Parts

A replacement guide rail assembly that supports and guides the appliance drawer or shelf for smooth, stable sliding and proper alignment. Restores reliable movement and helps prevent sticking or binding. What it does:

• Guides the drawer or shelf along its track for consistent, even movement.
• Keeps the sliding component aligned to prevent tilting, binding, or uneven wear.
• Provides structural support for the drawer under normal load.
• Helps restore smooth operation when worn, bent, or damaged rails cause sticking or misalignment.

• Disconnect power and remove stored items before beginning any repair.
• Use basic hand tools; avoid forcing components and do not overtighten mounting hardware.

This air filter assembly replaces the factory air cleaner in compatible refrigerators to help reduce odors and maintain fresher air inside the fresh food compartment. Designed as a direct-fit replacement when the original filter is worn or clogged. What it does:

• Captures and helps reduce common refrigerator odors for improved internal air quality
• Circulates cleaner-smelling air through the fresh food compartment when the appliance's air circulation runs
• Helps maintain a neutral-smelling environment around stored foods to reduce flavor transfer
• For use when original filter is damaged, heavily soiled, or no longer performing

• One air filter assembly

• Check your owner's manual for the exact filter location and any appliance-specific steps before starting
• Replace with the power off or follow manufacturer guidance for safe access to the filter area
• Dispose of the old filter according to local regulations; avoid forcing parts during removal or installation

The HARNESS ASSEMBLY is an OEM part for LG refrigerators. It is a collection of wires bundled together into a single integrated unit, electrically connecting major fridge components like lights, temperature controls, and more. A properly functioning harness is vital for signal transmission throughout the appliance.

Causes of a bad harness assembly can include wear-and-tear damage from repeated door openings, exposed wires snagging on other parts, or potential water damage degrading insulation qualities over time. 

Symptoms of a bad harness assembly include:

• Lights, temperature controls, or other features failing to work properly  
• Intermittent or unreliable operation of connected components
• Loose or disconnected wires that may cause electrical issues
• Error codes related to sensor or control board failures

This part is also compatible with Sears/Kenmore models.

This door stopper replaces the small hinge stop that limits door swing and helps the door close and latch properly. It restores correct door alignment and prevents the door from swinging past its intended range. What it does:

• Acts as a mechanical stop on the door hinge to control opening angle and reduce stress on the hinge
• Helps the door close smoothly and remain properly aligned
• Commonly replaces a cracked, worn, or missing stopper that allows over-rotation or uneven closing
• Can reduce noise and wear caused by a loose or shifting door

• Disconnect power to the appliance before servicing to avoid injury
• Replace like-for-like; removal may require removing the hinge trim or screws—keep fasteners organized
• Inspect adjacent hinge components and seals for wear while the door is removed

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

This button assembly replaces a damaged or unresponsive control-panel button cluster to restore reliable button operation and user control. It fits into the appliance's front control panel and connects to the main control board. What it does:

• Replaces cracked, worn, or missing control-panel buttons
• Restores button responsiveness and reliable input to the control board
• Helps resolve symptoms like sticking, intermittent, or non-working buttons
• Maintains the original panel layout and tactile feedback

• Disconnect power (unplug appliance or switch off breaker) before beginning
• Access may require removing the control-panel trim or console—keep fasteners organized
• Handle the assembly carefully to avoid damage to the button contacts or wiring
• Test button function before reassembling the entire console

This guide assembly positions and secures the TV's front-panel or bezel components to keep controls and trim aligned for a clean fit and reliable button access. Replaces a worn, cracked, or misaligned guide to restore proper panel seating. What it does

• Aligns and supports the TV front panel/bezel so edges meet evenly
• Holds control board/buttons or trim in the correct location
• Prevents rubbing, rattling, or gaps between bezel and chassis
• Helps maintain consistent button feel and keypad alignment

• One guide assembly

• Unplug the TV and place on a soft, stable surface before beginning
• Remove bezel or trim per service manual to access guide locations
• Keep small screws and clips organized; compare old part orientation to new

This lower door hinge assembly supports and pivots the appliance door for smooth opening and reliable closing. Replacing a worn or damaged lower hinge restores proper door alignment and sealing. What it does:

• Provides the pivot point for the bottom of the door so it opens and closes correctly
• Stabilizes door alignment to prevent sagging or uneven gaps
• Helps maintain a consistent seal to preserve internal temperature
• Stops grinding, scraping, or noisy hinge movement when worn

• One lower hinge assembly

• Disconnect power and remove contents as needed; support the door before removing the hinge
• Remove mounting fasteners and transfer any pins or bushings if they remain reusable; install the new hinge in the original orientation
• Reinstall and tighten mounting fasteners, then check door alignment and operation; adjust as needed
• If the door is heavy, have a second person assist to avoid injury or damage

This drawer tray assembly replaces a damaged or worn refrigerator storage drawer to restore stable storage and smooth operation. It supports food storage and helps the drawer open and close as designed. What it does:

• Replaces cracked, warped, or broken drawer tray that no longer supports items
• Restores proper seating and alignment so the drawer slides smoothly
• Prevents items from falling through or catching on damaged edges
• Helps maintain internal organization and usable refrigerator space

• Disconnect power to the appliance before servicing to avoid injury
• Handle the tray carefully to avoid damage to plastic edges or clips
• Remove any contents and existing drawer components before installing
• If the drawer uses mounting clips or rails, inspect and replace damaged hardware as needed for proper fit

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This connector tube routes water from the refrigerator's supply to the ice maker or dispenser, restoring normal water flow and ice production when the original tube is cracked or clogged. It's a direct-fit replacement designed for quick restoration. What it does:

• Replaces damaged or cracked water line routing to the ice maker or dispenser
• Restores proper water flow to prevent low ice production or slow dispensing
• Helps stop leaks caused by split or brittle tubing at connector points
• Matches OEM routing and fit to maintain reliable connection and pressure

• Disconnect the refrigerator from power and shut off the water supply before beginning.
• Drain remaining water from lines and wear gloves; connections may drip when removed.
• Inspect fittings and seals; replace O-rings or clamps if they are worn or damaged.
• Tighten connections to a snug, leak-free fit; test by turning water back on and checking for leaks.