Lmxs30776d Parts

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

The Heater Sheath is an OEM part for LG French door refrigerators equipped with a pantry drawer or convertible compartment feature. This metal sheath encloses the refrigerator's temperature control heater, protecting wiring from moisture and extending the component lifespan.

Causes of a deteriorated heater sheath may relate to normal corrosion or cracks from temperature variations over many years of use. Moisture exposure can lead to rust or compromised insulation.

Symptoms of a problematic sheath include: 

• Inconsistent or fluctuating drawer/compartment temperatures  
• Unusual odors emanating near electrical components
• Potential short-circuiting or heating system malfunctions

This OEM sheath also fits select Kenmore/Sears refrigerators.

This fan grille assembly covers and protects the evaporator fan while directing airflow through the refrigerator compartment. Replace a cracked, warped, or missing grille to restore proper circulation, reduce vibration/noise, and prevent items from contacting the fan. What it does:

• Covers the evaporator fan and channels chilled air through the compartment
• Helps maintain even cooling and consistent airflow
• Common symptoms: broken or missing louvers, loose/broken tabs, rattling or vibration, uneven cooling or weak airflow

• One fan grille assembly

• Disconnect power to the refrigerator before servicing
• Remove shelves/drawers as needed for access
• Remove mounting screws or release tabs; carefully disengage the old grille
• Align the new grille, secure hardware without overtightening, ensure vents are unobstructed, then restore power

This replacement water tank assembly restores the refrigerator's internal water reservoir. It stores and chills water for the dispenser, helping maintain steady flow and addressing leaks caused by a cracked or brittle tank. What it does:

• Holds and chills dispenser water inside the fresh food compartment for consistent flow.
• Replaces a cracked or leaking reservoir that can leave puddles inside the refrigerator.
• Helps address low/no water or sputtering at the dispenser caused by an air-leaking or deformed tank.

• 1 water tank assembly

• Unplug the refrigerator and turn off the water supply before servicing.
• Remove shelves/panels as needed; note tube routing and avoid kinking lines during transfer.
• Fully seat water-line fittings and perform a gentle pull test; restore water and check all joints for leaks.
• Dispense several glasses of water to purge air until flow is steady; recheck for leaks after the first hour of operation.

This main control board is the electronic brain of your appliance. It manages power and coordinates signals to critical components so the unit starts, runs, and responds to commands correctly.

• Distributes power and control logic to motors, fans, valves, sensors, and the user interface
• Replaces a failed board that causes no power, unresponsive controls, or erratic operation
• Works with existing sensors and loads to execute cycles at the correct time

• Disconnect power before service and allow capacitors to discharge
• Use ESD protection; handle the board by the edges and avoid touching components
• Photograph wiring; move connectors one at a time, ensuring keyed orientation and full seating
• Inspect wiring and connected parts for shorts that could damage the new board

This electronic control board assembly replaces the PCB that directs your appliance's functions. Swapping a failed board can restore power, responsiveness, and proper overall operation.

• Regulates power distribution and timing to key components
• Interprets inputs from sensors and user controls to run programmed cycles
• Can resolve no power or dead display, won't start, unresponsive controls, intermittent operation, or error codes
• Often implicated after power surges or electrical damage

• Disconnect power before servicing; shut off gas/water if applicable
• Use ESD protection; handle the board by its edges and avoid touching components
• Photograph wiring and transfer connectors one at a time to the new board
• After installation, verify any required option settings or perform model-specific reset/diagnostics per the service information

This holder assembly is a structural mounting piece that supports and secures an internal component in your appliance. Replacing a cracked or worn bracket helps restore proper alignment and keeps parts stable during everyday use.

• Provides a rigid mounting point for the attached component
• Keeps parts aligned to reduce movement and vibration
• Helps prevent rattling or noise from loose mounts
• Common signs of failure: visible cracks/broken tabs, looseness, or parts that won't stay seated

• Disconnect power and, if applicable, turn off the water supply before service
• Note the orientation of the original part to match fitment
• Reuse existing mounting screws or hardware unless the manufacturer specifies otherwise
• Do not overtighten fasteners; the secured component is fully seated and stable

This sub PCB assembly is an electronic control board that processes inputs and switches components, coordinating specific appliance functions. Replacing a failed board can restore normal operation and resolve dead controls, error codes, or intermittent, unpredictable behavior. What it does:

• Distributes and regulates control power and switches loads via onboard relays/triacs
• Interprets signals from sensors and the user interface to execute commands
• Coordinates timing and operation of related components per the appliance's program logic
• Failure may present as no power, won't start, unresponsive or flickering display, random beeps, or recurring error codes

• 1 sub PCB assembly

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph wiring; transfer connectors one at a time and ensure they are fully seated
• Secure the board with existing fasteners/standoffs; perform any required reset or diagnostic per your model's service info

This gas valve assembly controls and shuts off the flow of gas to your appliance's burner system, enabling safe ignition and steady heat. Replacing a sticking or failing valve restores reliable heating performance and consistent flame control.

• Regulates gas flow to the burner(s) as commanded by the control/thermostat
• Works with the igniter to light the flame
• Helps maintain stable gas supply for consistent heating
• Failure symptoms include no ignition, igniter glowing with no flame, intermittent heat, or a weak/uneven flame

• Disconnect power and shut off the gas supply before servicing
• Allow the appliance to cool and work in a well-ventilated area
• Transfer any fittings or brackets from the original valve if required
• After installation, restore gas and check all connections for leaks with a soapy-water solution

The SWITCH, MAGNET is an OEM part for LG refrigerators. It is a switch designed to function in conjunction with the magnetic door seal, indicating to the refrigerator when the door is open or closed. This allows the refrigerator to regulate temperatures properly based on door positioning. 

Symptoms of a bad switch, magnet can include:

•  Temperature control issues, with the fridge struggling to maintain proper coolness levels
•  The fridge fails to switch to energy-saving modes when the door is closed 
•  Lights not turning on or off correctly when the door is opened or closed

Replace yours today with this genuine OEM LG part to ensure consistent and reliable temperature control. This OEM LG part is also compatible with Sears/Kenmore.

The Thermistor Assembly, PTC is an OEM part for LG refrigerators. Located within refrigerator compartments, the thermistor monitors interior temperatures sending signals to the control board. It contains a temperature-sensitive resistor to provide precise feedback on cooling needs. This feedback allows the refrigeration system to maintain consistent temperatures across all food storage areas. 

The causes of thermistor issues arise from normal component degradation, impacts, water damage, and manufacturing defects affecting sensor accuracy.

Symptoms of a bad Thermistor Assembly include:

• Fluctuating or inaccurate temperature readings  
• Compartments failing to maintain proper cooling levels
• Frost or condensation builds up inside
• Repeated Auto Defrost error messages

This genuine LG replacement preserves dependable monitoring for balanced refrigeration control. Keeping food fresher longer and suitable for Sears/Kenmore refrigerators with LG components.

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

This rail guide assembly restores smooth, stable sliding and alignment for a refrigerator drawer. It replaces worn or damaged drawer rails to help drawers open and close evenly and prevent sticking or dropping. What it does:

• Supports and guides the refrigerator drawer along its track for consistent movement
• Keeps the drawer aligned to prevent rubbing, sticking, or uneven closure
• Helps prevent the drawer from disengaging or falling out when pulled
• Reduces noise and binding caused by worn or damaged rails

• Disconnect power to the appliance or unplug before starting any repair
• Remove the drawer per your model's service instructions to access the rails
• Align the new rail assembly and secure with existing fasteners; do not force parts
• If you encounter damaged mounting points or broken fasteners, stop.

Replace a worn home bar door gasket to restore a tight seal and maintain proper cooling in the home bar compartment. This replacement gasket helps prevent cold air loss, reduce condensation, and improve temperature consistency. What it does:

• Creates an airtight seal around the home bar door to keep cold air in and warm air out.
• Helps reduce frost buildup, interior condensation, and uneven temperatures.
• Restores proper door contact to improve cooling performance and reduce strain on the compressor.
• Recommended when the gasket is cracked, torn, warped, or no longer seals evenly.

• Disconnect power to the appliance before beginning any service.
• Clean the door frame and mating surface before installing the new gasket for a proper seal.
• Remove the old gasket and press the new gasket into place evenly; check that the seal is continuous around the door.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated