Lmxs30776ss Parts

A replacement heater sheath that protects and supports the dryer's heating element assembly, helping the unit heat safely and consistently. Fits specific LG dryer heater assemblies and restores proper heating performance when the original sheath is damaged. What it does:

• Encases and shields the heating element to prevent contact with other components
• Helps maintain correct airflow and consistent heat distribution in the dryer
• Can reduce arcing or shorting if the original sheath is cracked or worn
• Common symptom: dryer heats intermittently, trips thermal cutouts, or element contacts surrounding parts

• One heater sheath

• Intended for service technicians or experienced DIYers; follow the dryer's service manual
• Disconnect power (and gas if applicable) before starting any repairs
• Inspect the heating element and surrounding insulation for damage while replacing the sheath
• Replace mounting hardware and seals as needed; test the dryer for proper operation after reassembly

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore storage for fresh produce and help maintain proper organization in the refrigerator. Designed as a direct-fit replacement identified by the OEM part number. What it does:

• Holds fruits and vegetables to keep them separated from main shelves
• Slides on rails for easy access to stored produce
• Replaces cracked, chipped, or warped crisper trays that no longer seal or slide smoothly
• Restores proper fit and alignment within the refrigerator's drawer cavity

• Remove all food from the drawer area before beginning installation
• Lift out the old tray by disengaging the drawer from its rails; reverse to install the new tray
• Handle with care to avoid damage; inspect rails and catches for wear before reinstalling

Replacement drawer tray assembly that restores stable support and containment for an interior refrigerator drawer. Helps keep stored items organized and restores proper seating of the drawer. What it does:

• Provides the molded support surface for a refrigerator drawer so contents sit level and secure
• Replaces cracked, warped or damaged trays that cause items to tip or fall
• Helps the drawer seat and align properly in the cabinet
• Common symptoms: visible cracks or breaks, drawer sagging, contents sliding or falling, tray detached from drawer frame

• One drawer tray assembly

• Remove food and slide the drawer out to access the tray; installation is typically a simple align-and-seat replacement
• Use gentle pressure to snap the tray into place; avoid forcing broken plastic parts
• Wear gloves to protect hands from sharp edges on broken pieces
• Unplug the appliance or disconnect power before beginning work

This cover assembly replaces a damaged or missing TV cabinet panel to restore the set's appearance and protect internal electronics from dust and debris. It provides a secure mounting surface for internal modules and keeps the chassis enclosed. What it does

• Replaces cracked, warped, or broken cabinet panels that expose TV internals
• Protects circuit boards, power supply, and connectors from dust and accidental contact
• Restores a finished, factory appearance and helps reduce panel rattling or vibration
• Secures internal components by providing factory mounting points

• Unplug the TV and let capacitors discharge before starting any repairs
• Handle the cover gently to avoid scratches; wear gloves to prevent fingerprints on finished surfaces
• Use the proper screwdrivers and retain all screws; some fasteners may be reused

This upper hinge assembly secures and guides the appliance door at the top, restoring correct door alignment and smooth opening. Replace a worn or damaged hinge to stop door sagging and improve sealing and operation. What it does:

• Supports the top of the door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly during opening and closing
• Prevents or corrects door sag, rubbing, or uneven gaps that can affect sealing
• Stops grinding, squeaking, or binding caused by a damaged hinge

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door while removing and installing the hinge to prevent dropping or injury
• Use basic hand tools; follow the appliance service manual for torque and alignment steps

This front plate assembly is the exterior trim piece that restores the appliance's front surface and protects internal components from dirt and damage. It improves appearance and helps maintain a proper seal and alignment. What it does:

• Replaces a cracked, dented, or missing front plate to restore the unit's exterior finish
• Shields controls and internal components from dust, spills, and everyday wear
• Helps maintain proper fit and alignment of adjacent panels and trim
• Returns the appliance to a finished, factory appearance

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removal of adjacent trim or the control bezel; keep all screws and fasteners for reinstallation.
• Handle the plate carefully to avoid scratching the finish during installation.

This rail guide assembly restores smooth, supported movement for a refrigerator drawer or shelf that binds, falls, or slips. It replaces broken or worn guide hardware so the drawer opens and closes reliably. What it does:

• Guides and supports the drawer along the cabinet track for smooth sliding motion
• Prevents the drawer from sagging, sticking, or detaching during use
• Reduces scraping, grinding, or noisy operation caused by damaged rails
• Aligns the drawer for proper sealing and even weight distribution

• One rail guide assembly as shown

• Disconnect power to the appliance before service and remove stored items from the drawer
• Remove the drawer and any trim to access the rail
• Inspect mounting clips and fasteners; reuse or replace only the items explicitly specified by the manufacturer

This Front Cover Assembly is the outer panel that protects internal components and restores the appliance's appearance. It replaces a damaged or worn front cover to help maintain safe operation and a clean finish. What it does:

• Covers and protects control components, wiring, and internal mechanisms from dust and debris
• Restores cosmetic appearance when the original cover is cracked, dented, or discolored
• Helps ensure proper alignment and fit of adjacent trim and door components
• Reduces risk of foreign objects entering the appliance through the front opening

• Disconnect power (and water, if applicable) before beginning any repair
• Handle edges carefully; use gloves to avoid cuts or damage to the finish
• May require removal of trim, bezel, or adjacent panels
• Verify fit and part number against your appliance before installation

This drawer tray assembly replaces a damaged or worn refrigerator/freezer drawer tray to restore stable storage and proper sliding action. It keeps contents contained and helps the drawer open and close smoothly. What it does:

• Replaces a broken, cracked, or warped drawer tray that no longer holds items securely
• Restores smooth sliding and proper alignment of the drawer
• Prevents items from shifting or falling when the drawer is opened
• Helps stop scraping noises or rubbing caused by a damaged tray

• Disconnect power and empty the drawer before removing the old tray
• Handle the replacement carefully to avoid damage to plastic tabs or mounting clips
• Use basic hand tools; support the drawer while removing and installing the tray
• If any mounting clips or slides are damaged, inspect and replace them separately

This replacement home bar case is the molded compartment that fits into the refrigerator door to hold the home-bar area. It restores proper storage and support for bottles and accessories behind the home-bar door. What it does

• Serves as the molded housing/shelf for the refrigerator's home-bar compartment.
• Supports bottles and small items stored behind the home-bar door.
• Helps align and secure the home-bar door and internal components.
• Cracked or damaged cases can cause items to shift, rattle, or fall from the home-bar area.

• One home bar case

• Disconnect power to the appliance before beginning any repair.
• Remove the refrigerator door panel or inner liner as required to access the home-bar case; keep fasteners organized.
• Handle the plastic housing carefully to avoid further cracking; use correct OEM screws and clips for reassembly.
• Test the home-bar door operation and inspect for proper fit before returning the refrigerator to service.

This damper controls airflow between compartments to help maintain proper temperatures and consistent cooling. It replaces a worn or broken damper to restore normal airflow and temperature balance inside the appliance. What it does:

• Regulates air flow between compartments so the refrigerator can maintain set temperatures
• Helps reduce uneven cooling and temperature swings caused by a stuck or broken damper
• Works as part of the appliance's air distribution system to route cooled air where needed
• Common symptom: compartment temperature too warm or inconsistent airflow noise from the damper area

• One damper assembly

• High-level replacement; access usually requires removing interior panels or duct covers
• Disconnect power before any repair to avoid shock or injury
• Handle with care to avoid bending or damaging mounting tabs and linkage

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This display cover protects and finishes the refrigerator control panel, keeping buttons and the display window clear and secure for easy viewing and operation. It restores appearance and helps prevent damage to the underlying electronics. What it does:

• Replaces a cracked, scratched, or yellowed display cover to restore a clean front-panel appearance
• Shields the control board and display from spills, dust, and everyday wear
• Provides a clear viewing window for the temperature and status indicators
• Helps ensure buttons and touch areas remain accessible and visible

• One replacement display cover

• Disconnect power before servicing to avoid shock or damage to electronics
• Remove the outer door/control trim per your model's instructions; may require removing clips or screws
• Handle gently to avoid scratching; align tabs and reattach clips/screws securely

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit