Lrdcs2603s /00 Parts

The Fan and Grille Assembly is an OEM component designed for LG refrigerators. This assembly circulates air within the refrigerator compartment to maintain even cooling temperatures. 

Causes of a bad fan and grille assembly can include failure of motorized fan components over time, buildup of dust or debris restricting airflow, or physical damage to fan blades.

Symptoms of a bad fan and grille assembly include:  

• Development of warm spots within the fridge
• Excessive frost or ice buildup inside 
• Louder than normal operating sounds
• Inability to maintain proper temperature settings

Replace yours today with this genuine OEM LG assembly to restore optimized air circulation for balanced cooling. This replacement assembly is compatible with Kenmore, Frigidaire, and GE refrigerator models. Proper airflow is essential for energy efficiency and food freshness.

This Vegetable Tray Assembly replaces a damaged or worn crisper pan to keep produce contained and stable in the refrigerator. It restores a clean, level surface for fruits and vegetables and helps maintain normal storage organization. What it does:

• Replaces cracked, warped, or broken crisper drawer pans that allow leaks or unstable storage
• Provides a smooth, easy-to-clean surface for storing fruits and vegetables
• Supports proper drawer alignment so the crisper slides in and out smoothly
• Helps prevent produce from sitting in spills or pooling liquids

• Disconnect power to the refrigerator or follow the manufacturer's safety guidance before servicing.
• Remove the existing crisper drawer and slide the tray into the drawer compartment, aligning rails and stops.
• Inspect drawer tracks and guides for damage; replace or clean as needed to ensure smooth operation.

A replacement vegetable tray assembly that holds produce in the refrigerator crisper area and restores proper storage support and airflow. Designed to fit into the factory crisper slot and keep fruits and vegetables organized. What it does:

• Replaces a cracked, warped, or missing crisper tray to restore stable storage for produce
• Supports the crisper drawer and helps maintain proper airflow around stored items
• Prevents direct contact between produce and the refrigerator floor, reducing bruising
• Fits into the existing crisper housing and works with the factory slide/rail system

• Installation is user-serviceable; remove crisper drawer and slide the tray into place on the rails
• Inspect surrounding rails and supports for damage before installing the new tray
• Use gentle pressure to seat the tray—do not force or bend the part
• Unplug refrigerator or disconnect power if removing components that expose electrical parts

Replacement drawer tray assembly that restores storage and organization in your refrigerator drawer, providing a stable surface and proper support for foods. Helps replace cracked, warped, or damaged trays for cleaner, safer storage. What it does:

• Provides a flat, supportive surface for holding packaged foods, produce and deli items.
• Keeps contents contained and helps prevent items from shifting or tipping during use.
• Restores proper drawer fit and sliding performance when the original tray is cracked, warped or broken.
• Helps maintain a sanitary interior by replacing stained or damaged tray surfaces.

• Disconnect power to the appliance or follow manufacturer safety guidance before servicing; remove food from the drawer first.
• Remove the drawer, then lift out the old tray and set the new tray in place; reinsert drawer and test smooth operation.
• Inspect slides/rails for damage or debris and clean before reinstalling; replace damaged rails or hardware as needed.

This DC motor drives the refrigerator's circulation fan, moving air across the coils and through the compartments for steady, efficient cooling. Replacing a weak, noisy, or seized motor restores airflow and temperature stability. What it does:

• Converts DC power into rotation to spin the attached fan and promote airflow
• Supports efficient heat exchange for even compartment temperatures
• Common symptoms: fan not running or intermittent, loud humming/squealing/grinding, warm spots or frost buildup, longer run times
• Contributes to reduced ice production or error codes in some models

• 1 DC motor

• Disconnect power and wear cut-resistant gloves; internal panels may have sharp edges
• Access the motor behind the interior panel or rear service panel; note connector orientation and wire routing
• Transfer the fan blade, grommets, and any mounting hardware from the old motor if needed
• Seat the blade fully and verify it spins freely before reassembly and restoring power

This evaporator assembly is the sealed refrigeration coil and housing that absorbs heat inside the refrigerator/freezer to enable cooling. Replacing a faulty evaporator restores proper heat transfer for normal cooling performance. What it does:

• Circulates refrigerant through the evaporator coil to remove heat from the cabinet air.
• Helps prevent frost buildup when working correctly; heavy frost on the evaporator can indicate failure.
• Restores cooling when a damaged or corroded evaporator reduces cold production or causes inconsistent temperatures.
• Works as the core heat-absorption component in the appliance's sealed refrigeration loop.

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing interior panels and defrosting the evaporator area; follow manufacturer service instructions.
• Handle carefully to avoid sharp edges and damage to the coil or tubing.

This holder secures the dryer-related assembly in place to reduce movement and wear, helping maintain proper alignment and quieter operation. It's a simple replacement that restores part stability in the appliance. What it does:

• Secures a dryer assembly or component to the appliance frame to prevent shifting
• Helps reduce vibration and rubbing noises caused by a loose part
• Maintains correct alignment so related parts operate smoothly
• Used when the existing holder is cracked, broken, or missing

• Disconnect power before replacing any dryer components to avoid shock or injury
• Access location and removal steps vary by model; follow the appliance's service manual or exploded view
• Keep fasteners and adjacent parts organized for reassembly; replace any damaged clips or screws

This case assembly is the outer display housing that mounts over a refrigerator's control/display area to protect and frame the user interface. It restores the visible display area and keeps controls clean and accessible. What it does:

• Provides the outer housing and bezel for the refrigerator display and control panel
• Protects internal display components from spills, dust, and everyday wear
• Restores the appliance's finished appearance around the control/display area
• Helps hold the display and user controls in their proper position

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Handle the part carefully to avoid scratching or cracking the bezel; use soft surfaces and appropriate tools.
• Retain and reuse any factory screws, clips, or brackets unless replacement hardware is specified.
• Document connector locations and take photos to ensure correct reassembly.