Lrflc2706 Parts

This display cover protects the appliance's control board and display while keeping the control area visible and clean. It restores the finished look of the control panel and shields buttons and the display from spills and wear. What it does:

• Protects the electronic display and control buttons from moisture, dust, and everyday wear
• Keeps the control area visible and easy to read
• Helps prevent accidental contact with control board components
• Restores a worn, cracked, or discolored control panel for improved appearance

• Disconnect power to the appliance before removing or installing the cover to avoid shock or damage
• Remove any retainers or control panel screws as needed; handle the cover carefully to avoid scratching
• Align the cover to the control panel and secure all fasteners; test controls after reassembly
• Replace those components before installing the cover

This Magic Room cover is the replacement shelf cover for the refrigerator's convertible compartment, restoring a flat, stable surface to hold food and containers. It helps keep items supported and the compartment functioning as intended. What it does:

• Replaces a cracked, chipped or missing Magic Room shelf cover
• Provides a stable surface for storing foods and containers in the convertible compartment
• Helps maintain proper spacing and support for drawer/bin components
• Prevents items from falling through or contacting temperature controls below

• Remove food and any drawers or bins that block access before installing
• Handle carefully to avoid chipping; support edges when sliding into place
• Reassemble components in reverse order and ensure the cover seats securely
• Follow all safety steps in the refrigerator owner's manual; unplug or power off if recommended for your model

This door stopper cushions and limits an appliance door's travel to prevent slamming and reduce wear on the hinge. It helps the door close smoothly and reduces noise for a better user experience. What it does

• Stops and cushions the door at the end of its swing to prevent hard impacts
• Reduces hinge and cabinet wear caused by repeated slamming
• Helps eliminate banging or rattling noises during door movement
• Can restore proper door feel when the original stopper is cracked, worn, or missing

• One door stopper

• Service with the appliance unplugged and/or power disconnected for safety
• Typically installed at the hinge/cabinet area using basic hand tools; may require removing a trim or access panel
• Inspect hinge screws and mounting area; replace any damaged hardware and tighten to secure the stopper

This mechanical mounting band secures a bracket assembly inside the appliance to keep components aligned and reduce vibration. It restores proper bracket positioning so moving parts run quietly and reliably. What it does:

• Holds a bracket or component assembly in place to maintain proper alignment
• Dampens movement and reduces vibration-related noise or rattling
• Prevents excess wear by keeping parts from shifting during operation
• Helps maintain correct clearances to avoid interference or rubbing

• Disconnect power before inspecting or replacing internal parts
• Remove only the fasteners necessary to access the bracket; keep track of hardware
• Secure all fasteners to the manufacturer's torque or snug specification
• Replace the band if bent, cracked, or missing to restore proper fit and function

This injection tube directs water to the refrigerator ice maker so the mold fills correctly and produces ice. It replaces a cracked or blocked tube to restore reliable water flow to the ice-making assembly. What it does:

• Channels water from the valve to the ice maker fill cup for proper ice production
• Helps prevent leaks caused by cracked or brittle tubing
• Commonly replaced when the ice maker won't fill, fills slowly, or leaks near the ice mold
• Works with the ice maker fill system; not a water valve or pump

• Disconnect power and shut off the water supply before starting work
• Inspect adjoining fittings and seals; replace worn grommets or clips as needed
• Handle carefully to avoid kinks or damage to the tube during installation

This slide rail guides and supports a single appliance drawer or pull-out door so it opens and closes smoothly and stays aligned. Replaces a worn, bent, or noisy guide to restore proper movement and stability. What it does:

• Provides a rolling/sliding track for a drawer or pull-out door to travel smoothly
• Replaces damaged or worn rail that causes sticking, misalignment, or uneven movement
• Helps keep the drawer properly supported and prevents sagging or binding
• Works as a direct-fit replacement when the original rail is broken or worn

• One slide rail (single left or right guide)

• Disconnect power and empty the drawer before starting repairs
• Typical installation requires removing the drawer and fastening the rail with existing screws or clips
• Inspect mating hardware and replace any stripped screws or broken clips for secure fit

This cover assembly is the outer rear cabinet panel that protects and encloses a flat-panel TV's internal components, restoring the TV's appearance and safety after damage or during rebuilds. What it does

• Replaces a cracked, warped, or missing rear cabinet to protect circuit boards, power supply, and wiring
• Restores a secure mounting surface for internal components and connector access
• Helps prevent dust, debris, and accidental contact with live parts
• Improves the TV's cosmetic finish when the original housing is damaged

• One rear cover assembly

• Always unplug the TV and place it on a soft, flat surface before beginning work
• Handle the cover carefully to avoid damaging plastic tabs or screw bosses
• Installation typically requires removing rear screws and reconnecting any retained brackets or gaskets

This display cover assembly is the outer lens that protects and finishes the appliance control/display area, restoring a clean appearance and protecting the underlying control board and display. It's a direct-fit exterior panel for the control/display. What it does:

• Protects the control board and display from spills, dust and accidental contact
• Restores a cracked, scratched or discolored control/display lens to a clean, readable surface
• Maintains correct spacing and mounting for buttons, LEDs or touch elements behind the lens
• Helps prevent moisture or debris from reaching sensitive electronics

• One display cover assembly (lens/control panel cover) as shown

• Disconnect power to the appliance before starting any repair
• Remove any retaining screws or clips and lift the cover away gently to avoid damaging mounting tabs
• Handle the lens by the edges to avoid fingerprints or scratches on the display area
• Inspect mounting clips and nearby components and replace any damaged fasteners

This filter head assembly holds and secures the refrigerator's inline water filter cartridge, providing a sealed connection to the water lines for reliable flow and filtration. Replace a damaged head to stop leaks and restore normal dispensing. What it does:

• Secures the water filter cartridge and provides the water-line connections for the refrigerator's dispensing and ice systems
• Creates a sealed path to prevent leaks at the filter connection
• Restores proper water flow when a cracked or worn head restricts or leaks
• Helps ensure water passes through the filter media rather than bypassing it

• One filter head assembly

• Turn off the refrigerator ice/water dispenser and shut off the household water supply before replacing
• Relieve pressure by dispensing water after shutoff and carefully disconnect tubing; check and replace any worn O-rings or seals
• Hand-tighten connections, then check thoroughly for leaks when water is restored

This door gasket is the flexible rubber seal that lines a refrigerator door, restoring the seal that keeps cold air in and warm air out. Replacing a worn or damaged gasket helps maintain proper cooling and efficiency. What it does:

• Seals the door to prevent cold-air leakage and reduce energy loss
• Helps prevent frost buildup and condensation inside the compartment
• Supports even cooling to protect food freshness
• Reduces compressor run time caused by an air leak

• Disconnect power and remove food from the door area before starting
• Clean and dry the sealing surface thoroughly for a proper fit
• Work the gasket into the door channel evenly; start at the corners and press into place
• Avoid using sharp tools that could nick the gasket; inspect the door frame for damage before installing

This fan grille assembly restores proper airflow and protects the refrigerator fan from debris. It replaces a cracked, broken or missing front grille to reduce rattling and help maintain efficient cooling circulation. What it does

• Covers and protects the evaporator/recirculation fan while directing airflow
• Replaces damaged or warped grille pieces that cause vibration, noise or loose fit
• Helps prevent objects from contacting fan blades and interfering with operation
• Restores original appearance and grille alignment for consistent airflow

• Disconnect power to the appliance before beginning any repair
• Remove surrounding panels or shelves as needed to access the fan grille; keep track of screws and clips
• Handle edges and plastic tabs carefully to avoid breakage; test fit before final fastenings