Lrflc2706s /00 Parts

This guide rail is a direct-fit replacement that helps a refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores proper drawer support and reduces sticking or uneven movement. What it does

• Guides and supports the refrigerator drawer so it slides in and out smoothly.
• Replaces a worn, bent, or broken rail that causes the drawer to bind or jam.
• Reduces rattling, scraping, or uneven drawer travel.
• Restores proper drawer alignment and load support for normal operation.

• One guide rail.

• Remove all items from the drawer and pull the drawer out to access the rail before starting.
• Use basic hand tools; retain screws and hardware unless replacements are specified elsewhere.
• If the rail is clipped or latched, note latch positions for proper reinstallation.
• Disconnect power only if working near electrical components or lighting; follow appliance safety precautions.

This replacement spring restores proper tension to a microwave oven door hinge so the door opens and closes smoothly and holds position. It's a direct-fit part that helps eliminate sagging or uneven door movement. What it does

• Replaces a worn or broken hinge spring to restore proper door tension and alignment
• Helps prevent door from dropping open or not staying closed securely
• Supports smooth, controlled door opening and closing motions
• Addresses symptoms such as a sagging door, uneven closing, or loose-feeling hinge

• One replacement hinge spring (quantity: 1)

• Disconnect power to the appliance before attempting any service to avoid electrical shock
• Access may require removing the outer door panel or control panel; follow OEM disassembly instructions
• Handle the spring carefully—springs can be under tension and may release suddenly

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This replacement screw secures panels and components on LG appliances to restore proper alignment and prevent rattling or loose parts. It's a direct-fit fastener used where OEM mounting hardware has become stripped, lost, or damaged. What it does:

• Secures panels, brackets, or trim to maintain appliance structure and alignment
• Helps stop vibration noise caused by loose panels or components
• Replaces missing or damaged mounting hardware to prevent parts from shifting
• Restores proper fit where stripped or worn screws no longer hold

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten; excess torque can strip threads or crack plastic
• If working near electrical components, unplug the appliance first to ensure safety
• Keep removed screws organized during disassembly to match locations on reassembly

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling or loose parts. Simple, direct replacement when a worn or missing screw causes loose panels or intermittent contact. What it does:

• Fastens panels, brackets, or small components to maintain proper alignment and reduce vibration
• Prevents loose trim, covers, or assemblies that can cause noise or improper sealing
• Replaces missing, stripped, or corroded screws that interfere with reliable operation
• Works wherever the OEM screw specification is required for secure mounting

• Use the matching screw hole and tighten until snug; avoid over-torquing to prevent stripping
• Disconnect power to the appliance if accessing electrical or moving parts near the work area
• If multiple screws are missing or panels are damaged, replace all fasteners for even support

This damper assembly controls airflow between refrigerator compartments to help maintain set temperatures and even cooling. Replaces a failed or stuck damper to restore proper air distribution and temperature balance. What it does:

• Regulates airflow between compartments so cold air moves where needed
• Can stop stuck-open or stuck-closed airflow that causes uneven temperatures
• Often linked to symptoms like warm spots, inconsistent cooling, or temperature swings
• Help reduce excess frost or humidity issues caused by improper airflow

• Disconnect power to the appliance before starting any repair
• Access usually requires removing interior liners, shelves, or panels; follow the service manual
• Handle actuator and wiring carefully; avoid pinching wires when reinstalling

The Dispenser Control Board is an OEM replacement part for LG refrigerators. This board is an important electronic component that controls and regulates the operation of the refrigerator's water and ice dispenser functions. It monitors dispensing requests and activates the solenoid valves and motors to dispense ice and water through the refrigerator door.   

Causes of a bad control board can include malfunctioning electronic components due to normal wear and tear over time. Water exposure or other damage can also affect the board's operability.

Symptoms of a bad control board include:

• Dispensing issues such as inconsistent or intermittent water/ice delivery  
• The dispenser not working at all or only partially functioning
• Error codes displaying on the refrigerator's control panel
• Strange noises coming from the dispenser area

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This duct connector is the OEM-style assembly that links dryer exhaust sections or connects the dryer outlet to the vent duct, helping guide airflow out of the appliance and maintain a secure vent connection. What it does:

• Provides a secure connection between dryer exhaust outlet and vent ducting
• Helps direct hot, moist air safely out of the appliance vent system
• Reduces gaps that can cause air leaks or lint buildup at the connection
• Fits where the original connector attaches to the dryer vent assembly

• Turn off and unplug the appliance before attempting removal or installation
• Inspect surrounding ducting and lint traps; clean before reassembly to reduce fire risk

This evaporator assembly circulates refrigerant and helps remove heat inside the freezer compartment so your refrigerator can maintain proper cold temperatures. Replaces a worn or damaged evaporator to restore normal cooling performance. What it does:

• Circulates refrigerant through the evaporator coil to absorb heat from the freezer compartment
• Removes frost and maintains proper airflow when paired with the defrost system
• Commonly replaced for symptoms like excessive frost buildup, poor cooling, or a noisy evaporator area
• Works with the existing fan, heater, and defrost components to support normal cooling cycles

• Disconnect power to the appliance before starting to avoid shock or compressor damage
• Replacement may require access to the freezer liner, removal of shelving and trim, and refrigerant system service if sealed-system work is needed
• Inspect and replace any damaged grommets, mounting hardware, or seals to prevent vibration and leaks
• Follow OEM service instructions for proper routing, torque, and defrost-heater connections

This guide assembly keeps a sliding appliance drawer or rack aligned for smooth, reliable movement and helps prevent sagging or derailment. It restores proper tracking so the drawer/rack opens and closes without binding. What it does:

• Guides and supports a sliding drawer or rack so it stays aligned during use
• Reduces binding, sagging, or derailment when loading or pulling the drawer/rack
• Eliminates scraping or grinding noises caused by a worn guide
• Helps restore smooth, even motion and proper engagement with the slide mechanism

• One guide assembly

• Disconnect power before starting any repair
• Remove the affected drawer/rack to access the guide; keep track of fasteners
• Align the guide with the slide channel and secure per the OEM fastening points; some designs snap in while others use screws
• If mounting hardware is worn or missing, replace with OEM-specified fasteners for safe operation

The Refrigerator Hinge assembly,center is an OEM replacement part for LG refrigerators. This center hinge assembly plays a role in connecting the refrigerator doors, facilitating their smooth opening and closing motion. 

Causes for replacement include normal wear and tear, accidents, or loading the doors with excessive weight over an extended period.

Symptoms of a bad hinge assembly include:

• Doors that don't close flush or have gaps 
• Doors that are difficult to open or close
• Loose, squeaky, or wobbly doors
• Damaged or broken hinge components

This OEM LG part is also compatible with select Sears/Kenmore brand models.

The Power Cord Assembly is an OEM replacement part for LG refrigerators. It includes both the electrical cord and strain relief connector that links the refrigerator to a standard wall outlet.

This power cord assembly is responsible for safely delivering electricity from the outlet to the control board and components inside the refrigerator compartment. It allows the unit to properly power on and maintain cold interior temperatures.

Symptoms of a bad power cord assembly can include: 

• The refrigerator fails to power on at all
• Electrical humming, buzzes, or burning smells detected  
• Tripped circuit breakers interfering with the operation
• Indicators of cord fatigue such as cracks or frays

Causes may involve normal wear over years of use, improper strain relief, or physical damage. Replacing the cord assembly with this genuine LG OEM part ensures a continued reliable power supply to the unit. It is also compatible with Kenmore refrigerators.

This Main PCB Power Control Board is the primary control assembly that manages your appliance's power distribution and control functions, restoring normal operation when the original control board fails. What it does:

• Controls power delivery to motors, valves, heaters and system electronics to coordinate appliance cycles
• Replaces a failed or damaged main control board that causes no power, intermittent operation, or unresponsive controls
• Helps resolve symptoms such as appliance not starting, random shutdowns, or erratic cycle behavior
• Works with the appliance's sensors and user interface to execute programmed functions

• One Main PCB Power Control Board assembly

• Disconnect all power before starting — this board carries live voltage
• Handle the PCB carefully and avoid touching components; use anti-static precautions if available
• Verify connectors are fully seated and routed clear of moving parts before reassembly

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This slide rail supports and guides a refrigerator/freezer drawer so it opens and closes smoothly and stays aligned. Replaces a worn or broken rail to restore proper drawer movement and prevent sagging. What it does:

• Guides the drawer on a smooth track for consistent opening and closing
• Restores proper alignment if the drawer sticks, drags, or tilts
• Supports drawer weight to prevent sagging or uneven movement
• Works with existing mounting points and fasteners for a direct replacement

• One slide rail

• Disconnect power to the appliance and remove the drawer before installing
• Compare the old rail to the new part for correct orientation and hardware
• Install using the appliance's original screws; avoid over-tightening to prevent damage
• Test drawer movement after installation and re-check fasteners for security